XYZ Printing da Vinci Jr.1.0w User manual

Ver. 1.8 April 2016
P 1
da Vinci Jr.1.0
da Vinci
Jr.1.0w
User Manual
da Vinci Jr.1.0
da Vinci Junior 1.0w 3D Printer

Ver. 1.8 April 2016
P 2
da Vinci Jr.1.0
The purpose of this user manual is to help users understand and use the da Vinci Junior 1.0w 3D printer correctly. It
contains the operating instructions, maintenance information and application skills of the da Vinci Junior 1.0w 3D print-
er. To learn more about the latest news of the da Vinci Junior 1.0w 3D printer, please contact local dealers or visit the
ofcial website of XYZprinting: http://www.xyzprinting.com
Trademarks
All trademarks and registered trademarks are the property of their respective owners.
Print History
New editions of this manual incorporate new and changed material different from previous editions. Minor corrections
and updates may be incorporated into reprints of the current edition without releasing additional announcements or
documentation regarding the updated version. The User Manual is for user reference only. If you need to obtain the
latest information, you are welcomed to visit the XYZprinting website: www.xyzprinting.com
Before using this printer, please first remove
the xed materials from the printing module and
printing bed. Switching on the printer's power
without removing these fixed materials may
damage the machine.
Registration via XYZware before your rst print
is strongly recommended. When registered with
XYZprinting, you will receive latest technical
supports and updates. To register, simply click
"Register Now" to begin.
You may use XYZware to initiate manual updates to the printer
rmware and software. When using the printer for the rst
time, we recommend connecting to the Internet and performing
manual update once to obtain the latest resources.
The optimal room temperature for printing is 15-32 ◦C (60-
90 ◦F). Printing quality may be affected if room temperature is
higher or lower.
If you need more detailed technical support and program
resources, visit the website: http://support.xyzprinting.com/
global_en/Support
Before operating the printer, insert the SD card in the SD
card port to make sure that the printing program is able to run
properly.
Before you start printing, please afx the bed tape on the print
bed. The bed tape may be removed after printing is complete.
(Bed tape can be reused.)
Before launching XYZware, connect the PC to with printer
using the USB cable. For a better user
experience, it is strongly advised to follow the proper
procedure for using the product.
Important Notice
Please carefully read the contents of the product
instruction manual before using this product.
2
3
4
5
5
1
6
7
8
8
3

Ver. 1.8 April 2016
P 3
da Vinci Jr.1.0
• Do not place the printer in humid or dusty environment such as bathrooms and high trafc areas.
• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or
tumble and it may cause serious injury.
• Please keep the front door closed during printing to avoid injury.
• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.
Product Overview
Accessory Checklist
Important Safety Instruction for Use of Maintenance Tools
Important Safety Instruction
• The maintenance tools provided should be only handled by an adult. Please keep the tools away
from children.
• The scraper is used to remove the object from the print bed when printing has nished. The bed tape
is reusable and it can be replaced when it has worn out.
• Store the gear cleaning brush properly. This tool shall only be used to clean the specied parts of the
machine and should not be used for the cleaning of other parts to prevent damaging the machine.
A: Filament movement area
B: Feed module
C: Detector
D: Extruder
E: Filament
F: Print bed
G: SD card port
(Storage format: FAT32)
H: Control and display panel
I: Front cover
USB Port
Power Switch
Power Connector
G
．Cleaning Brush ．Scraper
．USB Wire
．Power Cord ．Bundled lament
．Bed Tape X 3pcs ．Filament spool axle ring
．Power Adapter
．Guide tube ．Cleaning Wire x 5 ．Feeding Path
Cleaning Wire
．SD Card ．Feeding Tube Grip X1
(For replacing and installing the
Feeding Tube Grip, please
watch the tutorial video
on XYZprinting ofcial website)

Ver. 1.8 April 2016
P 4
da Vinci Jr.1.0
Remove the securing styrofoam next to the print bed.
Insert the SD card that came with the printer into
your computer or download the latest XYZware from
the ofcial Website and install it on the computer.
Use the USB cable to connect the printer to PC.
Connect the power cord to the printer then turn on
the power switch.
Unpacking the Product
5
6 7
Note: please use the original power adapter and power cord along with the printer in order to
prevent product damage or safety hazards caused by differences in voltage specications.
Open the box and remove
the accessories and
cushions.
Remove 2 foams at the back of the cardboard.
Remove the plastic bag
and the tapes.
Raise the paper cardboard slightly upwards so
that the paper cardboard is detached from the
styrofoam slot at the bottom.
Raise the paper cardboard slightly upwards
so that the paper cardboard is detached from
the styrofoam slot at the bottom.
123
54

Ver. 1.8 April 2016
P 5
da Vinci Jr.1.0
Note: Please follow these steps and ensure that the guide tube is properly installed before
starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt lament feed.
Reminder: If you are not too sure where the feed module tube port is,
you may open the casing of the machine to see the indication label.
Installing the Accessories
Ensure that the guide tube has been tightly
inserted into the port to complete the guide tube
installation process.
Direct the guide tube from the tube movement
area out of the machine and then insert the
other end of the lament tube into the feed
module tube port.
34
．Guide tude
Before installing the guide tube, turn off the
printer and move the extruder to the far left-end
of the X-axis. If not done otherwise, the print
quality will be affected.
After the extruder has been adjusted, insert the guide
tube into the extruder.
2
1
．X axis

Ver. 1.8 April 2016
P 6
da Vinci Jr.1.0
First retrieve lament spool to install the lament
spool axle ring.
Place the assembled lament spool (with the spool axle
rings) on the lament holder on the left side of the printer. Pull out a section of the lament and insert it into the
feed port.
Caution: Pay attention to the direction the
lament is being pulled out and ensure that the
lament spool axle is being rotated in the correct
manner.
Open the release arm and push the lament all the way
to the bottom so that the front end of the lament is
completely inserted into the feed module.
Take out and separate the lament spool
axle ring into its two components.
Install the sensor chip. Please pay special attention to
the position of the installation holes on the chip.
Insert the lament spool axle ring components
to either side of the lament spool, and use a
cruciform screwdriver to tighten and secure the
rings to the axle to complete the installation of
the lament spool axle rings.
12
34
56
7
Load Filament
CHANGE SPOOL

Ver. 1.8 April 2016
P 7
da Vinci Jr.1.0
LOAD FILAMENT
Then load lament using the control panel on the printer…
UNLOAD FILAMENT
First unload lament using the control panel on the printer…
1
1
Select "UTILITIES" > "CHANGE SPOOL" > "LOAD FILAMENT".
Select "UTILITIES" > "CHANGE SPOOL" > "UNLOAD FILAMENT".
First open the release arm and then pull out the lament
with spool axle rings. Arrange it properly for later use.
2
2
Wait for the extruder to heat up and load
lament.
Wait for the extruder to heat up and unload lament. Press "OK" to pull out lament.
3Check if the nozzle outputs lament and
press "OK" to go back to main menu.
LOAD FILAMENT
EXTRUDER HEATING
TEMPERATURE 210 ∘C
PLEASE WAIT
LOAD FILAMENT
EXTRUDER HEATING
TEMPERATURE 210 ∘C
PLEASE WAIT
LOADING
PLEASE WAIT
UNLOADING
PLEASE WAIT
[ OK ] TO RETURN
UTILITIES
CHANGE SPOOL
HOME AXES
JOG MODE
UTILITIES
CHANGE SPOOL
HOME AXES
JOG MODE
CHANGE SPOOL
LOAD FILAMENT
UNLOAD FILAMENT
CHANGE SPOOL
LOAD FILAMENT
UNLOAD FILAMENT
CHECK FILAMENT
OUT FROM NOZZLE
[ ＜ ] TO RETRY
[ OK ] TO RETURN
DA VINCI Jr. 1w
UTILITIES
SETTINGS
INFO
DA VINCI Jr. 1w
BUILD FROM CARD
UTILITIES
SETTINGS
When nishing "UNLOAD FILAMENT"
Unload Filament
Note: Always implement the "UNLOAD FILAMENT" function when replacing
the cartridge in order to ensure proper removal of the lament. Cutting
lament too closely to the print head may result in residual lament
blocking and causing damage to your print head.

Ver. 1.8 April 2016
P 8
da Vinci Jr.1.0
The troubleshooting instruction may guide you to x the problem. If any error persists, please contact customer service.
When an error occurs, please refer to the service code shown on the printer and/or in the software, and check the
suggestions below for troubleshooting.
Technical Support
Website: http://support.xyzprinting.com
Email: US - [email protected]
EU - [email protected]
Other regions - [email protected]
Support Details
Error message Action
The printer is handling other task Try again after all tasks are completed. Also check the information shown on printer display.
Unable to update printer rmware Check Internet connectivity / Update rmware again later.
Filament 1 jammed Unload and reload cartridge 1 and clean the nozzle.
Filament 1 loading problem Unload and reload cartridge 1.
Filament 1 installation problem Reinstall the cartridge 1 or change a new cartridge.
Top cover open Close the top cover.
Filament 1 level low: 30m left Replace cartridge 1 when necessary.
Filament 1 level low: 5m left Replace cartridge 1 immediately.
Note:
Please retain all original packaging material when shipping your product for warranty
purposes. Shipping without original packaging materials may cause product damaged during
the shipment and may cause chargeable service fees.
Symptom
Cartridge 1 chip error
Cartridge 1 chip error
Extruder 1 heating problem
Cartridge 1 not installed
Cartridge 1 chip error
X-axis movement abnormalities
Y-axis movement abnormalities
Z-axis movement abnormalities
Internal communication error
Internal communication error
Extruder storage error
Unable to detect extruder
Action
Reinstall the cartridge or change a new cartridge.
Reinstall the cartridge or change a new cartridge.
Check connections, reboot the printer.
Install/reinstall cartridge.
Replace cartridge 1 before printing.
Check motor/sensor connections.Check sensor position.
Check motor/sensor connections.Check sensor position.
Check motor/sensor connections.Check sensor position.
Reboot the printer.
Reboot the printer.
Replace the extruder.
Please reinstall the extruder and reconnect the at cable,
then restart the printer.
Service Code
0 0 0 7
0 0 0 8
0 0 1 4
0 0 2 8
0 0 2 9
0 0 3 0
0 0 3 1
0 0 3 2
0 0 5 0
0 0 5 1
0 0 5 2
0 0 5 7

Ver. 1.8 April 2016
P 9
da Vinci Jr.1.0
da Vinci Jr.1.0w 3D Printer
Environmentally friendly materials-PLA
Model Name
Dimensions
Weight
Display
Language
Connection method
Print Technology
Build Volume
Print resolution
Print module
Nozzle diameter
Filament diameter
Files supported
Operating system
Hardware
requirement
da Vinci Junior 1.0w 3D Printer
16.54 x 16.93 x 14.96 inches （420 x 430 x 380 mm）
26.46 lbs (12kg)
2.6” FSTN LCM
Multi language
USB Wire / SD Card / WiFi
FFF (Fused Filament Fabrication)
5.9 x 5.9 x 5.9 inches （15 x15x15cm）
100 - 400 microns
Single Nozzle
0.4 mm
1.75 mm
.stl , XYZ Format(.3w)
Windows 7 - 8 above (for PC)
Mac OSX 10.8 64-bit above (for Mac)
X86 32/64-bit compatible PCs with 2GB+ DRAM (for PC)
X86 64-bit compatible Macs with 2GB+ DRAM (for Mac)
Specications
PLA laments are made using polymerized lactic acid, which is extracted from corn, sugarcane or other sugar-
containing crops, and is regarded as the most environmentally friendly 3D printing material. Unwanted PLA printed
objects can be simply discarded in the soil where it will naturally decompose.
PLA materials printed at low temperatures are not only suitable for family settings, its bright texture also makes it a
favorite amongst our clients. You may observe the characteristics of PLA during printing.
• Despite their harmlessness, PLA placed in an environment or water bath exceeding 50 oC (122 oF) will soften and deform.
• Hence, overly humid areas are not suitable storage environments for PLA. We recommend properly sealing and
stashing away unused PLA laments.
• A sugary smell is often generated when printing with PLA laments, giving yet another attractive feature.

Ver. 1.8 April 2016
P 10
da Vinci Jr.1.0
Introduction
About the da Vinci junior series 3D printer
Product features
Present creativity
The da Vinci junior series 3D printer (da Vinci Jr.) is a brand new product from XYZprinting that is dedicated to the 3D
printer market. Its intricate and colorful exterior as well as its high resolution printing specications are set to make it
the new favorite for families and home hobbyists. Whether you're creating an enjoyable learning playground to inspire
your children's creativity or unleashing your innovative ideas and quickly generate prototypes for your products.
To learn more about presenting your
creativity, please visit the Gallery section
of XYZprinting's ofcial website.
• Environmentally friendly 3D printer that satises the WEEE recycling requirements, and utilizes the environmentally friendly PLA
laments for printing.
• Satises electrical appliance safety specications of the EU and many other countries, making it the best home-based 3D printer
for the entire family.
• Detachable SD card that allows you to store 3D model les that you have created and edited for easy printing.
(Please export .stl les into .3w format via XYZware before printing.)
• A gallery of 3D objects is available for download after free registration.
• Amazing power saving design with a maximum power consumption of 75W, offering low power usage even for extended use.
• Weighs only 12 kg, and can be easily integrated in any household and family settings.
• Smart temperature control designs. Cooling fans within the machine is able to adjust and optimize printing temperature to
improve product quality.

Ver. 1.8 April 2016
P 11
da Vinci Jr.1.0
After switching on the printer's power, the user may use the display panel at the front of the printer to understand its
status and usage data. The functional buttons on the right allow the user to perform the relevant operations.
DA VINCI Jr. 1w
BUILD FROM CARD
UTILITIES
SETTINGS
Functions
Function Description
UTILITIES Printer adjustment / Change lament / Sample printing
SETTINGS The parameters of printer
INFO The rmware and printer statistical information
MONITOR MODE Monitor of extruder and print bed working temperature and printing progress
Button Functions
Up Direction Up
Down Direction Down
Left Back to previous menu / Reduce the adjustment value
Right Forward to submenu / Increase the adjustment value
OK OK; conrm selection/settings
HOME Home Button, return to main menu
Button instructions

Ver. 1.8 April 2016
P 12
da Vinci Jr.1.0
The map above shows the functions your may access with the control panel on the printer.
For detailed descriptions of each function, please refer to their respective pages in this user manual.
Maps of Functions
頁碼
P6
P7
P7
P13
P13
P13
P14
P15
P15
P17
P17
P17
P17
P17
UTILITIES
LOAD FILAMENT
UNLOAD FILAMENT
CHANGE SPOOL
SETTINGS
HOME AXES
STATISTICS
INFO
MONITOR MODE
JOG MODE
SYSTEM VERSION
BUILD FROM CARD
SPOOL STATS
CLEAN NOZZLE
CALIBRATE
Z OFFSET
HELP
P16
P16
P16
P16
P16
BUZZER
LANGUAGE
ENERGY SAVE
AUTO LEVEL
RESTORE DEFAULT
Home Menu Top Menu Sub Menu

Ver. 1.8 April 2016
P 13
da Vinci Jr.1.0
BUILD FROM CARD
JOG MODE
HOME AXES
“HOME AXES” moves the extruder to the lower left corner.
“JOG MODE” is used to manually move the extruder and the print bed.
3 sample models are built into the printer. You may begin your rst 3D prints with the samples.
1.Select a sample to print
To home axes:
To move the extruder:
To print a sample:
Select “YES” to proceed.
build FROM CARD
demo
DEMO
start building
no
yes
2.Put the bed tape on the print bed.
3.Select "YES" to start printing
4.Remove the printed object when the printing has
finished and the print bed has descended.The bed
tape is reusable and it can be replaced when it's worn.
home axes
are you sure
NO
YES
UTILITIES
1.Select “X-AXIS” (to move right
and left) and "Z-AXIS" (to move up and down).
Execute "Home Axes" function rst to move
"Z-AXIS". “Y-AXIS” (to move print bed
backwards and forwards).
2.Select desired increment of travel with and
buttons, and press (or hold) or button for
desired direction to move the extruder.
jog mode
x-axis
y-axis
z-axis
x-axis ok exit
－ ■ 001mM ＋
010mm
020mm
▲ ▲

Ver. 1.8 April 2016
P 14
da Vinci Jr.1.0
CALIBRATE
UTILITIES
To ensure printing quality, please update printer firmware to the latest version. With latest printer
firmware, you may calibrate the print bed in case of low quality printing.
1. Active print bed calibration by selecting “UTILITIES”>”CALIBRATE”>”YES” on the screen.
2. Press the detection head on the right side of the print head according to the instruction of screen message,
followed by pressing OK.
3. Wait for detecting.
4-2. If the detecting result is shown as “FAIL”,
press "OK" to go to next page, and press "OK"
again to exit.
Note:
1.The dirt on the detection head and the top of print module will influence detection result. Make sure that
the dirt is cleaned before calibration the platform, and remember to install and locate the print module.
2. If the residues is on the top of the print module, the detection result will be shown as follows. Clean
the dirt before recalibration of the platform. Clean the dirt before recalibration of the platform.
And check the detecting result by going to “INFO”>
”LEVELING INFO”. Contact customer service for the
issue and provide the details of leveling information.
4-1A. If "SUCCESS" is shown for the detection
result, and "AUTO LEVEL OFF" is shown on the
third row on the screen, it indicates good platform
levelness. Press "OK" to exit and print.
3. The printer may enable or disable auto-level based on the result of calibration. You may switch off
the function manually under "Settings".
4-1B. If you see "AUTO LEVEL ON" under “SUCCESS”,
this indicates that the print bed is slightly unleveled.
The printer will adjust the configuration based on the
detecting result automatically while "AUTO LEVEL" is
enabled. The printing mode helps to improve printing
quality with slower printing speed. You may switch off
the function under "Settings".
A 0000 0000 0000
B 0000 0000 0000
C 0000 0000 0000
[OK] TO RETURN
CALIBRATE
FAIL
AUTO LEVEL ON
[OK] TO CONTINUE
PLEASE CONTACT
CUSTOMER SERVICE
[OK] TO RETURN
A 0317 0320 0313
B 0318 0323 0308
C 0312 0300 0440
[OK] TO RETURN
CALIBRATE
SUCCESS
AUTO LEVEL ON
[OK] TO RETURN
CALIBRATE
SUCCESS
AUTO LEVEL OFF
[OK] TO RETURN
PRESS DETECTOR
NEXT TO EXTRUDER
[OK] TO CONTINUE

Ver. 1.8 April 2016
P 15
da Vinci Jr.1.0
UTILITIES
CLEAN NOZZLE
Z OFFSET (adjust the printer module)
Z OFFSET settings adjustment
The user may use the Z OFFSET function to adjust the gap between the printing nozzle and the printing bed.
Caution: This printer has already been tested and adjusted to the optimal gap between the printing nozzle and printing bed before
shipping. We recommend recording the original settings before carrying out any adjustments.
Over time, carbon deposits or lament dust buildup in the nozzle may decrease its performance. It is advised to clean the nozzle
after every 25 hours of printing.
Also, if the print bed calibration shows “ERR” or if there is any residue on your prints, you may try to clean the nozzle.
To clean the nozzle:
3.Hold the cleaning wire with the
pliers, and carefully pass the wire
through the nozzle openning.
1.Select "YES" to begin. 4.Select "OK" to return.2.Wait until the extruder heats up and
moves to the front, and the screen
shows “READY FOR CLEAN”
1.The recommended distance between the nozzle and print bed(with bed tape securely fastened) is 0.3mm. This should allow
two sheets of copy paper to be drawn out smoothly but six sheets of copy paper cannot be passed.
2.Increase/decrease the value based on a scale of 0.1mm.
Increasing the value will increase the gap between the print module and print bed by 0.1mm
Decreasing the value will also decrease the gap between the print module and print bed by 0.1 mm
+ [ ^ ]
Z OFFSET 0.1 mm
─ [ v ]
[OK] TO SAVE
If the cleaning cycle does not unclog the extruder, try cleaning the feeding path by following the steps below.
1.Unload filament correctly (refer to “UNLOAD FILAMENT”).
2.Move the extruder and the print bed to the home position by using the HOME AXES function.
3.Activate “UNLOAD FILAMENT” again and wait until the extruder is heat up to 150℃ . (Care should be taken during the
operation to avoid potential burn injuries.)
CLEAN NOZZLE
ARE YOU SURE ?
NO
YES
CLEAN NOZZLE
READY FOR CLEAN
[ OK ] TO RETURN
4.Press the white button
at the back of the
extruder to release it.
5.Lightly press the spring around
the feed hole and remove the
filament guide tube (do not
disconnect the white flat cable)
7.After cleaning the feeding
path, reinstall the guide tube
to the top of the extruder
and install the extruder to the
bracket.
6.Insert the thick cleaning wire into
the feeding path all the way down and
“floss” the inside of the nozzle to pull
the residue out.

Ver. 1.8 April 2016
P 16
da Vinci Jr.1.0
BUZZER
LANGUAGE
ENERGY SAVE
RESTORE DEFAULT
When the buzzer is turned on, the printer will output an audible signal when a button is pressed, print job is finished, or issue is
detected.
Buzzer is turned on by default. To switch off the buzzer:
LED luminaires are installed in the printing chamber. To save energy consumed, the lighting will go off after idling for 3 minutes (shown
as 03M on the display) by default.
To select a longer time interval:
All settings can be reset to factory default with a few clicks.
To reset all settings at once:
You may switch the display language on the printer between English and Japanese.
The default lanague is English. To switch to Japanese:
Select “OFF” and press “OK” to change the setting.
Select “06M” (for auto off after 6 minutes) or “OFF” (for never turn off the LED) and press “OK” to change the setting.
Simply select “YES” and press “OK” to reset.
Select “
ニホンゴ
"and press “OK” to change the setting.
buzzer on
off
on
language en
english
ニホンゴ
energy save off
off
03m
06m
restore default
are you sure
no
yes
SETTINGS
AUTO LEVEL
The printer will adjust the configuration based on the detecting result automatically while "AUTO LEVEL" is enabled. The printing
mode helps to improve printing quality with slower printing speed. You may switch off the function if necessary.
To change the setting of auto-level:
Simply select “OFF” and press “OK” to change the setting.
AUTO LEVEL [ON]
OFF
ON

Ver. 1.8 April 2016
P 17
da Vinci Jr.1.0
MONITOR MODE
STATISTICS
SYSTEM VERSION
SPOOL STATS
HELP
In “STATISTICS”, you can check the accumulated print time and last print time.
Firmware version is shown here. For stable printing performance, it is advised to keep the rmware up to date. To
check for rmware updates, please go to XYZscan/XYZware.
The URL to XYZprinting website can be found here. You may go to the website for the latest information, product
documents, tutorial video and more.
"MONITOR MODE" shows the temperature of the extruder. See below for the working temperature for the parts in
different modes.
“SPOOL STATISTICS” provides the information on cartridge level (see REMAINING), and the capacity, color and
material of the lament. Press to read the second page.
statistics
lifetime 00006h
last time 00h34m
ok to return
HELP
WWW.XYZPRINTING.COM
OK TO RETURN
system version
1.1.j
ok to return
color black
moterial PLA
ok to return
SPOOL stats
remaining 059m
CAPaCiTY 240m
DOWN NEXT PAGE
MONITOR MODE
EXTRUDER 046 C
OK TO RETURN
INFO

Ver. 1.8 April 2016
P 18
da Vinci Jr.1.0
This section describes how to clean the feed module. After heavy use of printer, if feeding of material becomes difcult or
impossible, please follow these steps.
References:
Please refer to CLEAN NOZZLE
to remove the blocks out of the
print head.
Note: The machine can be turned off only when the cooling fan of the print head stops running after the print is com-
pleted. Turning off the power directly may clog the print head.
Use the cleaning brush to scrub the feed gear back
and forth to remove the chips of lament out of the
gear. Replace the wire after the cleaning is completed.
2
Press the black rubber xer on top of hole and pull
the guide tube out.
2
Use the cleaning brush to scrub the gear; after removing residues of
lament on the gear, you can insert the guide tube and put the cover
back and then enjoy printing again.
3
Use the screwdriver to remove the screw and open the
top cover.
1
Use the “UNLOAD FILAMENT” function to loosen and
remove the lament.
1
B. Screwdriver (T10) for standard cleaning procedureA. Cleaning brush that comes with the printer
Preparation of Tools
A. Quick Cleaning
B. Standard Cleaning
Important Notice
Please peruse the product instruction manual before using this product.

Ver. 1.8 April 2016
P 19
da Vinci Jr.1.0
This chapter introduces how to carry out the setting correctly and to operate the wireless printing function. To understand if your
product is designed with wireless printing function, please refer to the table below.
●da Vinci 1.1 Plus ●da Vinci Jr 1.0w
1. Please make sure the connection between computer and printer properly. After completing the connection, activate the
XYZware.
●WEP ●WPA ●WPA2
References:
Please refer to the description of
CLEAN NOZZLE function for removing
the clogging of the print head.
Note: Turn off the 3D printer only after the print job is complete and the print head cooling fan stops running. Don't turn
off the power directly. Otherwise, the print head may be clogged.
Pre-setting preparation
1. The network printing function is mainly provided for the Intranet. Please set the printer and the computer in same network domain,
i.e. connecting to the same Wireless Access Point.
2. Before connecting the printer, adjust the set value of the connected Wireless Access Point. For details of setting method, please
refer to the Production Operation Manual or the information provided by the original factory.
3. The Channel Width that can be used by the wireless printing function is 20MHz. Please refer to the Operation Manual compiled
by the original factory for the Wireless Access Point to understand the adjusting method.
4. Please maintain the wireless network function in open status.
5. This machine can support the following connection safety mode. When setting the printer in online status, it is required to input the
Public Key related information.
Wireless printing
Start the setting
Wi-Fi Printing
2. Click on the printer monitoring function to open the printer-related information and then click “My Printer” > "Use Wi-Fi” to access
the Wireless Printing Set page.
(This image is for reference only)

Ver. 1.8 April 2016
P 20
da Vinci Jr.1.0
3. Please enter the printer name and then press “SCAN” to scroll down the menu for obtaining the exact Wireless Access Point
related information. The description sample will use XYZprinting as the name of Wireless Access Point. After obtaining the desired
information, enter the Public Key password and then press “Use Wi-Fi” and XYZware will update the online setting value of printer
through USB connecting wire.
4. After completing the printing, please press the “X” key at upper right corner to leave. To reset the wireless network connection,
press “STOP WIRELESS NETWORK/CHANGE SETTING" function keys to clear the value set before.
5. Remove the USB connecting wire and then restart XYZware and the machine is ready for online printing again.
At this time, conrm the connection is completed through the
information displayed on the printer.
The monitoring function of printer can be used to conrm the on-
line status and the IP information of the connected printer.
XYZware secures the IP address of the printer and the
connection is successful.
Note: Please naming printer and Wireless Access Point in English.
Note: If the printer cannot complete the connection with the Access Point within 90 seconds, then XYZware will discontinue the
detection. In this case, please check the operation steps and the network are set correctly.
Note: For the password of Public Key, please refer to the information indicated on the Wireless Access Point setting page, and the
length of the password will vary.
Note: After restarting the printer, IP information will be erased. Please setting again.
Note: The performance of wireless network may be affected due to various environment and power of machine. For
detailed information, please contact the wireless equipment provider or refer to the original factory’s manual. XYZprinting
cannot provide tested data for specic equipment.
INFO>WIFI(SSID) INFO>IP ADDRESS
Wi-Fi Printing