XYZ Printing da Vinci 1.0 Pro User manual

da Vinci 1.0 Pro
User Manual
ENG
Product Safety
Product Description
Printer screen menu, functions and messages
Functional operations and descriptions
Print
Support Details
Product Model:
da Vinci 1.0 Professional

P 2
V.1.1
da Vinci 1.0 Pro
The purpose of this user manual is to help users understand and use the da Vinci 1.0
Professional 3D printer correctly. It contains the operating instructions, maintenance
information and application skills of the da Vinci 1.0 Professional 3D printer.
For the latest information about da Vinci 1.0 Professional 3D printer and XYZprinting
products, please contact your sales representative or visit XYZprinting website:
http://www.xyzprinting.com
Do not place the printer in humid or dusty environment such as bathrooms and high traffic areas.
Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm and /or injury.
Do not let children operate this device without adult supervision. Moving parts can cause serious injury.
Please use the grounded power cord supplied with the printer to prevent a possible electrical shock.
Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.
Do not disassemble or replace the printer cover with none XYZprinting covers.
Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to printer damage or safety risks.
Do not use flammable chemicals or alcohol wipes to clean this device.
The process of heating the filament will produce a light non-toxic odor. Having a well ventilated area will ensure a more comfortable
environment.
Make sure to set the power switch to the off position and remove the power cord before transporting the device.
Do not touch the interior of the print while printing as it may be hot and include moving parts.
Some components of the printer are moving during operation. Do not attempt to touch or change anything inside before power off
the printer.
Do not attempt to service the printer beyond the instructions specified in this document. In the case of irrecoverable problem,
contact XYZprinting service center or your sales representative.
Product Safety
Safety and Compliance
Trademarks
Important Safety Information
Before you use, operate the product, change or remove any parts, components or materials of the product, or maintain the printer,
please ensure that you carefully read this User Manual and the safety instructions described below, and strictly follow the instructions
of such safety information.
The following warnings and attention notices are a best effort attempt to cover all scenarios; unfortunately it is not possible to do so in
the case of performing maintenance procedures that are not described in this manual the burden of safety falls to the customer side.
All trademarks and registered trademarks are the property of their respective owners.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●

P 3
V.1.1
da Vinci 1.0 Pro
Product Overview
USB Port
Auto Feed System
Power Switch
Power Socket
Cartridge Slot
Function Key
Control Panel
Extruder Module
Print Bed
DA VINCI 1.0 Pro. 1
UTILITIES
SETTINGS
INFO
Levelness of the Print Bed may be susceptible to vibration during transportation, which may influence print quality.
Please adjust the bed with reference to「Print Bed Adjustment」 before printing.
Product Description
． Cleaning Brush
Accessory Checklist
．Quick Guide, Warranty Card
．Software CD ．Side Cover Plate x2
． Cleaning wire x 5
．Filament Cartridge ．Cartridge Locker ． Copper Brush
Maintenance Tools
．Scraper
．USB Cable
．Power Cord
．Bed Tape X 3pcs
（The bed tape is reusable and it
can be replaced when it’s worn）

P 4
V.1.1
da Vinci 1.0 Pro
8
Open the box and
remove the accessories
and the cushion
Use the grip to take
off the machine
Remove 2 foams at the front of the cardboard
Open the upper cover and remove
fixities listed above
Remove fixing
paperboard
Pay attention particularly to actual paperboard
removal of the fixities listed above
Be sure to remove the fixing foam from
the axis
Be sure to remove the
cable tie as illustrated
above
Remove the fixing
styrofoam beside the bed
Remove bottom screw and the
fixing screw on the bottom of
the bed
Insert the bundled
software CD into the
computer and install
the software according
to instruction
Use the USB cable to
connect the printer to PC.
Connect the power cord
to the printer then turn on
the power switch
"Note: Please use the
power cord provided by
XYZprinting."
Packing support x2
Tape x2
Cable tie x1
Cable tie x1
Tape x2
Packing support x2
9
5
12
11
6 7
2
4
Important Safety Notes
• Do not use the printer in dust rich, highly humid or outdoor environments.
• Do not use the printer on a soft or tilt table to prevent the machine from falling, which may result in damage or personal injury.
• Do not put your hand into the machine during operation to avoid collision risk due to movement of the machine or to avoid burn
due to high temperature.
Note: Please removal all fixed materials before turning on the printer to prevent the
machine from damage
Open the box
1
Product Description
Remove all fixing tapes and
the packing bag
3

P 5
V.1.1
da Vinci 1.0 Pro
Maintenance and Service
Keep original packaging material in the event of sending your unit back for repair during the
warranty period. If other packing materials are used instead, the print-er may be damaged during the
transportation process. In such situation, the XYZprinting the right to charge repair fee.
Notes and Description for Use of Maintenance Tools
• The following tools can be used only in an environment with guidance or monitoring by adult. Do not allow
children to obtain maintenance tools in unfamiliar situations in order to avoid danger.
• Please make sure to maintain the printer as the bed is cooled.
• After print is finished and the print bed is cooled to room temperature, the printing object may be taken off with Scraper.
• In order to prevent print quality from impact due to residual and accumulated filament, which results in poor
discharge, after long-term use of print nozzle, it is recommended to enable the "CLEAN NOZZLE" (nozzle cleaning)
function of the printer every 25 hours of print to clear residuals with nozzle cleaning wire.
• Filament residuals produced during print may also attach onto nozzle and gear of print module to influence print
quality, printer operation, as well as measurement result of bed. For such situation, please use cooper brush to
clean the print module.
●
Display and Control Panel
Direction Up / Decrease the value
Back to pervious menu /
Adjust the value /Move to
the preview item
Go to the next menu / Adjust
the value /Move to the next
item
Select / Confirm setting /
Confirm and exit
Direction Down / Increase
the value
Home menu
OK
Pro. 1
UTILITIES
SETTINGS
INFO

P 6
V.1.1
da Vinci 1.0 Pro
Printer screen menu,
functions and messages
UTILITIES
CHANGE CART
HOME AXES
Installation and removal of filament, calibration of the printing bed and printing settings, including:
◆ CHANGE CART ◆ HOME AXES ◆ Z OFFSET ◆ JOG MODE ◆ CALIBRATE ◆ BUILD SAMPLE
◆ CLEAN NOZZLE
Load, unload filament and view the information about the filament. Using XYZprinting
filament to ensure smooth operation of the machine is recommended.
Refer to P.13 for Load filament
Refer to P.14 for Unload filament
Use the function to move the extruder to upper right corner of printing space and the print bed to the top.
Extruder homing:
Select “YES” to return the extruder to the preset position.
UTILITIES
CHANGE CART
HOME AXES
Z OFFSET
CHANGE CARTRIDGE
LOAD FILAMENT
UNLOAD FILAMENT
Pro. 1
UTILITIES
SETTINGS
INFO
HOME AXES
ARE YOU SURE?
NO
YES
UTILITIES
CHANGE CART
HOME AXES
Z OFFSET
Z OFFSET
Use the function to adjust the print bed upwards and downwards, and the printing distance
between the bed and printing module. The function will also record the setting value.
PREPARING
PLEASE WAIT
UTILITIES
HOME AXES
> Z OFFSET
JOG MODE
[ ^ ]
Z OFFSET 0.00 mm
[ v ]
[OK] TO RETURN

P 7
V.1.1
da Vinci 1.0 Pro
JOG MODE
Manually adjust the movement of X/Y/Z Axis for printer maintenance.
How to move the extruder:
Select “X-AXIS” to move extruder rightwards and leftwards
Select “Y-AXIS” to move extruder forwards and backwards
Select “Z-AXIS” to move the print bed
Use “UP” and “DOWN” buttons to select the moving distance. Then, select “-“ based on the desired distance
and press the “TO THE LEFT” button or select “+” and press the “TO THE RIGHT” button to adjust the moving
distance.
Press the “TO THE LEFT” button: The extruder will be adjusted rightwards/backwards or closer to the print bed.
Press the “TO THERIGHT” button: The extruder will be adjusted leftwards/forwards or away from the print bed.
Select a target to move:
●
●
●
●
●
●
Adjust the distance
JOG MODE
X-AXIS
Y-AXIS
Z-AXIS
UTILITIES
Z OFFSET
JOG MODE
CALIBRATE
X-AXIS [ OK ] >> EXIT
[ －]
▲
[ ■001mm ]
▲
[ ＋]
010mm
020mm
2
CALIBRATE
Use the function to adjust the print bed and make adjustment based on the reference value. The printing
quality will be affected by the levelness of the print bed. If you want to confirm the levelness of the print bed,
turn on the function to measure and check recommended adjustment.
UTILITIES
JOG MODE
CALIBRATE
BUILD SAMPLE
CALIBRATE
ARE YOU SURE?
NO
YES
Refer to P.15 for CALIBRATE
BUILD SAMPLE
3 built-in samples are stored in the printer. You can learn to use the printer through building samples.
Stick the bed tape onto the print bed before printing
UTILITIES
CALIBRATE
BUILD SAMPLE
CHANGE NOZZLE

P 8
V.1.1
da Vinci 1.0 Pro
CHANGE NOZZLE
Turn off the printer after the printing device and print bed automatically move to their positions and change
the printing module.
UTILTIES
BUILD SAMPLE
> CHANGE NOZZLE
CLEAN NOZZLE
CHANGE NOZZLE
ARE YOU SURE?
NO
YES
TURN OFF POWER
AND THEN CHANGE
NOZZLE MODULE
Levelness of the Print Bed may be susceptible to vibration during transportation, which may
influence print quality. Please adjust the bed with reference to「Print Bed Adjustment」 before printing.
Select "YES" and press "OK"
After completion of print, take off the print product.The print bed patch is reusable,replace the patch when it is worn out.
Stick the bed tape onto the print bed before printing or apply some glue stick on the bed tape for objects with
special structures to make the tape more adhesive and the object more difficult to remove.
Note:
Select the built-in sample to be printed
KEY CHAIN
START BUILDING?
NO
YES
BUILD SAMPLE
DEMO
KEY CHAIN
HEART
2

P 9
V.1.1
da Vinci 1.0 Pro
● UTILITIES > CLEAN NOZZLE
Printer Maintenance
UTILITIES
BUILD SAMPLE
CHANGE NOZZLE
CLEAN NOZZLE
Regular cleaning of the print nozzle facilitates to not only extending service life of the printer, but also improves print
quality.
Enable "CLEAN NOZZLE" (nozzle cleaning) function. Clean the nozzle after the nozzle is heated up, the bed has
been lowered and the extruder has been moved to the front end, and "READY FOR CLEAN" is displayed on screen.
Clean the detecting pin with Copper Brush
Filament residues produced during printing may become
attached to the nozzle and gear of print module to
influence print quality, operation of the printer, and
measurement result of the bed. If such a situation is
encountered, please use a copper brush to clean the print
module by brushing off residue and dirt on the detecting
pin .
Clean Nozzle with Nozzle Cleaning Wire
With increased print frequency, the carbon accumulation
and dirt in the nozzle might affect print quality.
Thus, we recommend you to clean nozzle for every 25
hours of print. Please clamp the nozzle cleaning wire
with needle-nosed pliers to insert it into the opening of
the nozzle carefully for cleaning.
Wipe Measurement Points
After the bed is lowered, please switch off power to
cool the bed, followed by wiping 3 measurement
points with damp cloth
1
2
3
Printer screen menu, functions and messages

P 10
V.1.1
da Vinci 1.0 Pro
SETTINGS
USER FILAMENT
BUZZER
AUTO HEAT
LANGUAGE
The basic settings of the machine, functions, selection and adjustment of printing values, including:
◆ USER FILAMENT ◆ BUZZER ◆ AUTO HEAT ◆ LANGUAGE ◆ ENERGY SAVE ◆ RESTORE DEFAULT
The user can customize the temperature of the extruder, print bed and unload filament based on the requirements of filament and
designing objects.
Refer to P.14 for Temperature Setting
When the buzzer is turned on, the printer will output an audible signal when a button is pressed, print job is finished, or
issue is detected.
Pro. 1
UTILITIES
SETTINGS
INFO
BUZZER
OFF
ON
AUTO HEAT [OFF]
OFF
ON
LANGUAGE
ENGLISH
ニホンゴ
FRANCAIS
SETTINGS
USER FILAMENT
BUZZER ON
AUTO HEAT OFF
SETTINGS
BUZZER ON
AUTO HEAT OFF
LANGUAGE
SETTINGS
AUTO HEAT OFF
LANGUAGE EN
ENERGY SAVE 03M
USER FILAMENT
APPLY SETTING
------------------------
>NOZZLE: 210 ℃
USER FILAMENT
NOZZLE: 210 ℃
>BED: 040 ℃
UNLOAD: 170 ℃
USER FILAMENT
NOZZLE: 210 ℃
BED: 040 ℃
>UNLOAD: 170 ℃
NOZZLE Print Bed Filament Unloading
Buzzer is turned on by default, you can select “OFF” and press “OK” to change the setting.
When “AUTO HEAT” is turned on, the printer heats up the extruder and the print bed after powered on.
This helps to shorten the idle time that is necessary to heat up the printer before printing.
“AUTO HEAT” is off by default. you can select ”ON” and “OK” to change the setting.
We suggest setting the language shown on the printer screen before use. The user can switch among
English, Japanese, French, German, Italian and Spanish. English is the preset language. For other languages:
Use “UP” and “DOWN” buttons to select the desired language and press “OK” to change setting.
●
●
●

P 11
V.1.1
da Vinci 1.0 Pro
ENERGY SAVE
LED luminaries are installed in the printing chamber. To save energy consumed, the lighting will go off after
idling for 3 minutes (shown as 03M on the display) by default.
All settings can be reset to factory default with a few clicks.
Select “06M” (for auto off after 6 minutes) or “OFF” (for never turn off the LED) and press “OK” to change
the setting.
Select "YES" and press "OK" to reset all settings.
SETTINGS
LANGUAGE EN
ENERGY SAVE 03M
RESTORE DEFAULT
SETTINGS
LANGUAGE EN
ENERGY SAVE 03M
RESTORE DEFAULT
ENERGY SAVE [ 03M ]
OFF
03M
06M
RESTORE DEFAULT
ARE YOU SURE?
NO
YES
RESTORE DEFAULT
STATISTICS
SYSTEM VERSION
Show the accumulated printing time and the last printing time. If you want to exit, press “OK”.
The firmware and printer statistical information, including:
◆ STATISTICS ◆ SYSTEM VERSION ◆ CARTRIDGE STATS ◆ WIFI INFO ◆ HELP
Show the version information of the current firmware. We suggest upgrading printer firmware to the latest
version to ensure steady quality. To check whether latest version of firmware is available, use XYZware. If you
want to exit, press “OK”.
INFO
STATISTICS
SYSTEM VERSION
CARTRIDGE STATS
Pro. 1
SETTINGS
INFO
MONITOR MODE
INFO
STATISTICS
SYSTEM VERSION
CARTRIDGE STATS
STATISTICS
LIFE TIME 00006H
LAST TIME 00H34m
[OK] TO RETURN
SYSTEM VERION
0.0.4
[ OK] TO RETURN
INFO

P 12
V.1.1
da Vinci 1.0 Pro
CARTRIDGE STATS
Show the remaining amount of filament (such as “REMAINING” for length information), volume of spool,
color of filament and material information. Press to skip the page and press “OK” to exit.
It shows the current situation of the WiFi connection of the printer.
Refer to P.17 for "XYZware for Pro" WiFi Setting
You may go to the website for the latest information, product documents, tutorial video and more. If you
want to exit, press OK.
If there is connection, SSID of connected Wi-Fi, IP address, name of the connected printer and connection
version will be shown. Press "OK" key.
INFO
SYSTEM VERSION
CARTRIDGE STATS
WIFO INFO
WIFI (SSID)
XYZ
[ DOWN] NEXT PAGE
INFO
CARTRIDGE STATS
WIFO INFO
HELP
INFO
CARTRIDGE STATS
WIFO INFO
HELP
CARTRIDGE STATS
REMAINING 240m
CAPACITY 240m
[ DOWN] NEXT PAGE
IP ADDRESS
192.168.40.38
[ DOWN] NEXT PAGE
COLOR
RED
[ DOWN] NEXT PAGE
PRINTER NAME
xyzpriting
[ DOWN] NEXT PAGE
MATERIAL
ABS
[ OK] TO RETURN
WIRELESS VER.
5.1.5
[ OK] TO RETURN
INFO
SYSTEM VERSION
CARTRIDGE STATS
WIFI INFO
HELP
www.xyzprinting.com
[ OK] TO RETURN
WIFI INFO
NO CONNECTION
[ OK] TO RETURN
WIFI INFO
HELP

P 13
V.1.1
da Vinci 1.0 Pro
◆ Filament loading is completed
Install and Load Filament UTILITIES > CHANGE CART > LOAD FILAMENT
Wait for the extruder to heat up
As the temperature reaches op-
erating setting the printer loads
automatically the filament, and
filament loading is completed
Check if the filament flows out
from the nozzle. If the filament has
flowed out, please press “OK” to
complete the loading process The temperature setting in this procedure is appli-
cable only to 3D Builder application software devel-
oped by Microsoft. For more information about 3D
Builder, please visit the Microsoft website
Remarks:
● Install Filament Cartridge from XYZprinting
● To use XYZprinting filament and apply the
recommended temperature settings,select "YES" ● Select "NO" if filaments of other brands are used.
*Recommend using a clips and other tools to cut the tips of the filaments to generate a tapered tip of 45 degrees, and
to straighten the filaments to facilitate the filament loading process.
● Install Compatible filament
CHANGE CARTRIDGE
>LOAD FILAMENT
USE XYZPRINTING
CARTRIDGE NOW?
> YES
USE XYZPRINTING
CARTRIDGE NOW?
> NO
USER FILAMENT
APPLY SETTING
>NOZZLE: 210 ℃
◆ Remove the filament stopper and tape and
install the filament cartridge into the empty
slot.
◆ Place and push to click the
cartridge locker
Activate LOAD FILAMENT function
on the control panel
Hang the spool on the
filament spool holder
prepared by yourself
A.
B.
C.
Insert filament into the guide hole until the printer
starts to load filament.
Press the release arm to open the feeding path
while inserting the filament
Then, activate LOAD FILAMENT function
on the printer
◆
◆
◆
Functional operations and descriptions
◆Remove the cartridge from the
cartridge slot if any to use your own
lament
※ To use pre-defined temperature settings:
Select "APPLY SETTING" directly to enter the
workflow shown on the left
※ To specify your own temperature settings:Select the
printer component using the new settings. To set
the heating temperature, please refer to instructions
provided for "Temperature Settings" function Select
"APPLY SETTING" to start applying your specified
temperature settings. The process on the left will start
and the printing component will start to heat up

P 14
V.1.1
da Vinci 1.0 Pro
Temperature Customization:
● Use "left key", "right key" to select the digit (single, tens, hundreds) for the temperature to be adjusted.
● Use "up key", "down key" to adjust the value.. The up key is for increasing value, and the down key is for
decreasing value. Press "OK" key to apply setting.
● If your customized temperature exceeds allowable setting range, press "OK" and a setting range alert
will be displayed.
● Once parameter settings are complete, return to the previous page and select “APPLY SETTING” to
save and apply the settings that you have specified.
● UTILITIES > CHANGE CART > UNLOAD FILAMENT
● SETTINGS > USER FILAMENT
Unloading Filament
Temperature Setting
In unloading filament, activating the filament unloading function on the control panel of the printer
1. Wait for the extruder to heat up to operating temperature and unload the filament.
2. As "PULLOUT FILAMENT" is displayed on the screen, press the release arm and pull out the filament.
The user may customize nozzle temperature, print bed temperature and filament unloading tempera-
ture in accordance with requirements of different filaments and design objects:
Select the item for temperature setting
Press "OK" to enter temperature
setting for nozzle
Press "OK" to enter temperature
setting for print bed
Press "OK" to enter temperature
setting for filament unloading
1
2
3
A Nozzle B Print Bed C Filament Unloading
Constraints of Customized Temperature Range
NOZZLE
BED
UNLOAD
Warming up of the nozzle of the extruder in feeding and print-
ing: 170℃ ~ 240℃
Temperature elevation range of the print bed: 40℃ ~90℃
Temperature elevation range of the extruder in unloading:
170℃ ~240℃
The temperature setting in this procedure is applicable only to 3D Builder application software developed by Mic-
rosoft. For more information about 3D Builder, please visit the Microsoft website
● If the temperature for print bed is specified as 40° C, room temperature printing will be enabled and the print bed will not
be heated.
● Excessively low extruder temperature may result in poor filament feeding, result in poor filament feeding that prevents
proper extrusion of the filament through the nozzle. Hence, please adjust the operating temperature of the extruder first.
Remarks:
Functional operations and descriptions

P 15
V.1.1
da Vinci 1.0 Pro
● UTILITIES > CALIBRATE
Before first printing, please calibrate the bed to guarantee an appropriate levelness of the bed for printing.
● Calibration Instruction
Print Bed Adjustment
UTILITIES
CALIBRATE
TIPS FOR TURNING
1 STEP=90 DEGREE
4 STEPS=1 CIRCLE
[ OK] TO CONTINUE
TURN FRONT KNOB
TO THE RIGHT :
8.7 STEPS
[OK] TO NEXT
After the printer is heated up to an appropriate
temperature, the distances between measurement
points on bed edge 1、2、3、4and probes
are measured automatically to determine levelness
of the bed.
There are three white 4-step knobs under the bed. Each step of turning indicates 90 degrees
of rotation, and 4 steps of flick indicate a complete circle of rotation of the knob as shown in
the messages on screen. Press“OK" key to continue viewing adjustment instructions.
After flicking the knobs in accordance with instruction, the printer will detect the levelness of the bed again. As "PERFECT" is displayed form
the detection result, print may be started.
If the measurement point of the bed is stained or the bed is too high or too low, wrong measurement will occur and the warning of
“CALIBRATE FAIL” will be shown on the screen. Please adjust the print bed.
Knobs corresponding to this procedure
Turning direction
Number of turning steps (each step indicates 1 tick/90 degrees of rotation)
After flicking knob in accordance with prompt, press "OK" key to continue
(There are three white 4-step knobs under
the bed. Each step of turning indicates
90 degrees of rotation and 4 steps of flick
indicate a complete circle of rotation of the
knob.)
Knob Location and Adjustment Direction
1 STEP
4 STEP
3 STEP
2 STEP
FRONT KNOB
Description for Instruction on Screen
TURN FRONT KNOB
TO THE RIGHT - Turn the front knob rightwards
TO THE LEFT - Turn the front knob leftwards
Instruction for Direction
Adjustment:
32
41
RIGHT KNOB
Description for Instruction on Screen
TURN RIGHT KNOB
BACKWARDS - Turn the right knob backwards
FORWARDS - Turn the right knob forwards
LEFT KNOB
Description for Instruction on Screen
TURN LEFT KNOB
BACKWARDS - Turn the left knob backwards
FORWARDS - Turn the left knob forwards
FRONT KNOB
RIGHT KNOB
BACKWARDSBACKWARDS
FORWARDSFORWARDS
TO THE RIGHTTO THE LEFT
LEFT KNOB
●
Functional operations and descriptions
PERFECT
ADJUST MORE ?
> YES
NO
If the automatic detection function determines that there is no need to adjust levelness of the
bed, "PERFECT" will be displayed on screen. At this moment, press "NO" to exit.
If it displays that the bed has to be adjusted from the detection result, an adjustment prompt will
be displayed.
●

P 16
V.1.1
da Vinci 1.0 Pro
Connect the printer and the computer with USB cable and install "XYZware for Pro" in
the computer to transfer print file.
Transfer print file through computer software "XYZware for Pro"
Import .stl, .3w files
Convert to .3w file
Save .stl file
Set print preference, transfer print file
Set software display language, preview color
Query, update software and firmware
versions, open link to official website
Adjust display scale
Switch preview angle rapidly
Move location of the model
Change angle of the model
Adjust size of the model
Display information about the model
Delete the model from the virtual platform
Check printer temperature,
filament information and print progress
A
A
BB
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
Print
“XYZware for Pro” may run in Windows 7 and above and Mac OS 10.8 and above operating
systems. You may install it from the bundled CD or download the installation file from the
XYZprinting official website.
After opening the software, click "Import" to select the model file you desire to print and load it.
After setting up the model at the desired size, location and placement, you can also adjust the
printing preferences, such as print speed and layer height by clicking the “Export” icon. Click
the “Export” button to slice the file.
When the model is sliced, click on the “Print” button to send the file for printing.
For more information on software update, operation instructions and technical supports, please
visit the XYZprinting official website: http://www.xyzprinting.com/
● Basic Operation Flow

P 17
V.1.1
da Vinci 1.0 Pro
●Wi-Fi Settings
Please use a USB cable to link the computer and the
printer, and open XYZware for Pro.
Click the "Printer Monitoring" function icon on the lower
right corner on the screen, open "Printer Monitoring"
window, click "My Printer" > "Scan" to enter the page
for printer search, and click "Wireless Network Settings"
to enter the page for wireless print settings.
1
2
2-2 2-3
2-4 2-5
2-1
Print
The printer supports Wi-Fi connection printing.
Install “XYZware for Pro”, and activate Wi-Fi setting of the printer in accordance with
the following instruction to switch the printer to wireless control mode, such that the
print file may be subsequently transferred wirelessly.
● Preparation Prior to Setting
WiFi Connection
◆WEP ◆WPA ◆WPA2
1.
2.
3.
4.
5.
The network print function is provided mainly for Intranet application. Please set the printer and the computer
in the same domain, that is, link them to the same wireless base station (Access Point)
Before linking the printer, settings would be adjusted for the connected wireless base station. For detailed set-
ting way, please refer to the operation instruction of the product or original vendor relevant information.
Channel Width may be set to 20 MHz for use of wireless print function. Please refer to original vendor operat-
ing instruction of wireless base station to understand adjustment way
Please keep the wireless network function in the on state
The machine supports the following link security modes. Public key information would be requested to enter in
setting printer connection (This image is for reference only)

P 18
V.1.1
da Vinci 1.0 Pro
Please enter printer name (either English or numeric
name), press "Scan" function to obtain wireless base
station information with dropdown menu, and select
the name of the wireless network you desire to connect.
After successful connection, Wi-Fi name will be displayed
on screen of the printer.
At this moment, USB cable may be taken off to continue
the print process.
If connection is to be disconnected, please connect USB
back between the computer and the printer, and open
XYZware for Pro again.
3
4
5
6
WIRELESS
CONNECTING
PLEASE WAIT
Product Specification
Print Technology Fuse Filament Fabrication (FFF) Weight 26 KG
Print Dimension 20 x 20 x 20 cm Print Material ABS / PLA
Print Resolution 0.1 / 0.2 / 0.3 / 0.4 mm Filament Diameter 1.75 mm
Display Screen 2.6 inch LCM Nozzle Diameter 0.4 mm
Connection
Method USB 2.0 / WiFi Operating Win 7 and above
System Mac OSX 10.8 and above
Print Software XYZware for Pro File Format 3w / stl
WiFi Connection
Print

P 19
V.1.1
da Vinci 1.0 Pro
1.The mobile device needs to support wireless printing.
2.Install XYZprinting App from Android or iOS system.
CategoryUser
Information
Gallery
Main screen
My Upload
Upload the
item and
printable file
Printer
To remote
control
printer
About
Printer
information
and copyright
Print From A Mobile Application

P 20
V.1.1
da Vinci 1.0 Pro
Please register an account at XYZprinting official
website before logging in.
After log in, you will see ” most popular”, "new"
and "printable*" three folders for you to choose.
Open the Play Store from your Android browser or
App store of iOS system to search "XYZgallery" and
download the application to your device.
1
3
Select the printer and confirm the printer
information, tap "Confirm to print", the file
will be sent to the printer and ready to print.
Select the object you want to print.
4
5
2
*The printable file is .3w format which can print from App directly. Some prints are.stl files that need to
export into .3w format via XYZware before printing. If the fi le requires payment, please follow the payment
instruction.
Note:
1.Ensure the mobile device and the printer are connected on the same wireless network.
2.Transferring a print fi le over a wireless network may take more time than transferring a print file from a USB mass storage device.
3. When a .3w file with incompatible slicing is selected, the message of “Printer Type does not match”will be displayed. We suggest
selecting other files or downloading .stl to slice before printing.
● Step