Yealink SIP-T32G Instruction manual

Star2Star Yealink SIP-T32G Quick User Guide
Copyright ©2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications.
Page 1 of 2
For detailed information please consult the
Star2Star Phone and Features Guide,
available for view/download via the
Star2Star Web Portal at:
!
https://portal.star2star.com/
!
BASIC FEATURES
MAKING A CALL
You can make a phone call via the following
devices:
1. Pick up the handset, icon will be
shown in the idle screen.
2. Press the Speaker button, icon will
be shown in the idle screen.
3. Press the Headset button if the headset is
connected to the Headset port in advance.
In the dial-up interface, the icon will be
shown in the idle screen.
Dial Number Directly: Dial the number.
Press Send soft key.
Dial from Pool: In dial-up interface, press
Pool soft key. Use the Navigation keys to
highlight your choice. Choose the
corresponding option. Select a record, then
press the Send/Dial button.
Redial: Press Redial button to enter the
Dialed Calls interface and choose a record
to dial out. During the call, you may
alternate between Headset, Handset and
Speakerphone by pressing the
corresponding buttons or picking up the
handset.
If you have registered more than one
account, you can choose a certain account
to make your call:
1. Press the Left/Right navigation key to
choose a default account when your phone
is in idle status.
2. In the dial-up interface, press the Line
soft key to choose an account. Then press
the Select soft key to confirm.
3. Press the three line keys on the keypad
to activate the chosen account.
ANSWERING A CALL
To answer an incoming call, lift the
handset.
To answer using the speakerphone, press
the Speaker button.
To answer using the headset, press the
Headset button.
If you are on an active call, the LCD screen
will display “Incoming Call: #”. Press the
Answer soft key to answer the call or
Reject soft key to refuse the call.
MUTING A CALL
Press the button to mute the call during
conversation. The icon will be shown in
the LCD screen. Press button again to
unmute the call.
VOLUME ADJUSTMENT
During the call you can adjust the volume by
pressing the Volume Adjustment bar
.
PUTTING A CALL ON HOLD
Press the Hold button or Hold soft key to put
an active call on hold. The corresponding
line will blink.
If there is only one call on hold, press the
Resume soft key or Hold button to retrieve
the call.
If there is more than one call on hold, press
the SWAP soft key to switch the
conversation.
To hold all calls, press the Line key which
you pre-set as Hold, then press the
Up/Down navigation key to highlight the
call. Press the corresponding Line key pre-
set as Hold to retrieve the call. You may
also press the Line key to establish a new
call and all current calls will be held.
TRANSFERING A CALL
You may customize your phone so that
incoming calls are transferred directly to the
third party (another extension, mobile phone
number, etc.) There are three ways to
transfer the call: Blind Transfer, Attended
Transfer and Semi-Attended Transfer.
Blind Transfer via phone interface:
1. Press the TRAN Button or Tran soft key
to put the caller on hold. Dial the new
telephone number and press the Tran soft
key to call out. Your call will turn to hold
status and the LCD will display as
Transferred.
2. After the call is answered, press the
Cancel soft key to complete the transfer.
3. You will be disconnected from the call
and the other parties will be able to talk.
Attended Transfer via phone interface:
1. Press the TRAN Button or Tran soft key
to put the caller on hold. Dial the new phone
number and press the OK or SEND button
to call out.
2. After the call is answered you will be able
to talk to the new party without the caller on
hold being able to hear the conversation.
Press the TRAN button to complete the
transfer. You will be disconnected from the
call and the caller on hold will be able to talk
to the transferred party.
Semi-Attended Transfer via phone
interface:
1. Press the TRAN button or Tran soft key
to put the caller on hold. Dial a new number
and press the OK or SEND button to call
out.
Gigabit Color IP
Phone SIP-T32G
Quick User Guide

Star2Star Yealink SIP-T32G Quick User Guide
Copyright ©2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications.
Page 2 of 2
2. While the new number is ringing, hang up
or press the Transfer soft key. Your call will
turn to hold status and the LCD will display
as Transferred.
3. You will be disconnected from the call
when the new caller answers the call. The
on hold caller and new caller will be able to
talk.
FORWARDING A CALL
Calls may be forwarded to another phone
number, cell phone or voicemail.
Call forwarding can be configured in the
following ways:
Always: Incoming calls are immediately
forwarded.
Busy: Incoming calls are immediately
forwarded when the phone is busy.
No Answer: Incoming calls are forwarded
when the phone is not answered after a
specific period.
To configure Forward option via the phone
interface:
1. Press Menu soft key > Features > Call
Forward to enter the configure page.
2. Select one of three options: Always
Forward, Busy Forward and No Answer
Forward and enter the phone number you
want to forward.
3. If you select No Answer Forward, you
must also select “After Ring Times” option.
4. Press Save soft key to save the changes.
FIND-ME / FOLLOW-ME
Use the Star2Star Find-Me / Follow-Me
feature in the Star2Star Web portal to
forward calls from your extension.
Follow Me (Immediate) -- Calls to your
extension will be sent automatically to the
number you define.
Find Me (Sequential) -- Calls to your
extension will ring your extension and any
other numbers that you define, in order.
Find Me (All) -- Calls to your extension will
ring your extension and any other numbers
that you define, all at once.
VOICE MAIL
Press Menu > Messages > Voice Mail >
View Voice Mail.
Alternatively you may dial 1000 to access
the Voicemail system at any time. The
system will prompt for your password.
Note: when accessing the voice mail
system for the first time your password is
your extension #. Change this to a 4-digit
number you can easily recall.
SPEED DIAL
Use the Star2Star Web Portal
https://portal.star2star.com/ to configure
speed dial buttons in individual phone
settings.
When configured on your phone, press the
designated speed dial key to dial out the
preset number.
CONTACT DIRECTORY
Note: The Star2Star Company Directory is
automatically downloaded.
Adding a contact:
1. Press Directory > Local Directory
2. Choose a group and press the Enter soft
key.
3. Press Add soft key, enter Name, Office,
Mobile, Other phone number. Use the abc
soft key to choose an input method like
Numeric, Upper/Lower Case Alphanumeric.
4. If you want to assign a contact to a
specific account, you can use the navigation
key to select desired account.
5. Choose and set a special ring tone for the
contact.
6. Use the navigation key to select the
group you want to assign.
7. Choose photo and then press Enter soft
key to enter into the edit page. Use the
navigation key to select a photo for this
contact. Press OK soft key to confirm and
return to the previous screen.
8. Press Save soft key to add the record to
contacts or Back soft key to cancel.
Editing a contact:
1. Press Directory > Local Directory
2. Choose a group and press the Enter soft
key.
3. Use the navigation key to highlight the
contact you want to edit. Press Option >
Detail and enter into the edit page.
4. Make the desired change. Press Save
soft key to save the change or press
Back soft key to return to the directory.
Deleting a contact:
1. Press Directory > Local Directory
2. Choose a group, and press the Enter soft
key.
3. Use the navigation key to highlight the
contact you want to delete. Press Option
soft key and scroll to Delete. Press OK soft
key.
4. A warning window will pop up asking
whether confirm to delete the contact.
5. Press OK soft key to confirm the
operation or press the Cancel soft key to
return to the directory.
LOCAL CONFERENCE CALL
1. Press the Conf soft key during an active
call.
2. The first call is placed on hold. You will
hear a dial tone. Dial the number to
conference in, then press the Send soft key.
3. When the call is answered, you may have
a private conversation at first and then press
the CONF button. The conference call will
include you and the other two parties.
4. During the conference, press the Split
soft key to split the conference into two hold
lines and press the Resume soft key to
resume the chosen call respectively.
5. When you press the Hold key, the
conference will be on hold.
6. When you hang up, the other parties will
remain connected.