Yealink Yealink SIP-T48G User manual

Wall Mount Quick Installation Guide
for SIP-T29_T27_T4X IP Phones
This quick installation guide provides step-by-step
instructions for mounting your IP phone to a wall.
www.yealink.com
The wall mount bracket is required for wall mount
installation, which is not included with your IP phone,
contact your reseller to purchase it separately.
Wall mount is avaliable for the following IP phones:
Packaging Contents
The following items are included in your package. If you
find anything missing, contact your system administrator.
(Purchase the proper package according to the IP phone
model you own.)
SIP-T48G IP Phone
Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
Wall Mount Quick Installation Guide
Avaliable for a SIP-T42G/T41P IP phone:
Wall Mount Bracket
Wall anchors and appliable tools not included in your
package are also required for wall mount installation.
Avaliable for a SIP-T46G IP phone:
Wall Mount Bracket
Avaliable for a SIP-T48G IP phone:
Wall Mount Bracket
SIP-T46G IP Phone
SIP-T42G IP Phone
SIP-T41P IP Phone
SIP-T29G IP Phone
Avaliable for a SIP-T29G/T27P IP phone:
Quick Installation Guide
SIP-T27P IP Phone
Wall Mount Bracket

For a SIP-T48G/T29G/T27P IP phone:
2. Insert the tabs on the wall mount bracket into the
slots on the back of IP phone. And then slide the wall
mount bracket to right.
PUSH
For SIP-T46G/T42G/T41P IP phones:
Wall Mount Quick Installation Guide
www.yealink.com
1. Pull the hookswitch tab in the handset cradle.
2. Rotate the hookswitch tab 180 degrees.
3. Reinsert the hookswitch tab.
The hookswitch tab has a lip which allows the handset to
stay on-hook when the IP phone is mounted vertically.
To adjust the hookswitch tab:
Adjust the hookswitch tab as shown below(Take a
SIP-T46G IP phone as an example):
WALL WALL
Adjusting the Hookswitch Tab
The IP phone is packaged with the hookswitch tab in
desk mount position. Before mounting the IP phone to
a wall, you must set the hookswitch tab to wall mount
position.
Attaching the Wall Mount Bracket
To attach the wall mount bracket:
1.Pull silica gels out of the two wall mount slots.(Only for
the SIP-T48G IP Phone )
Mounting the Wall Mount Bracket
Yealink provides the wall mount drilling template for each
IP phone model, which locates and marks the position for
mounting the screws (not provided) on the wall, as shown

86.8mm
www.yealink.com
For a SIP-T48G IP phone:
below:
118.00mm
118.00mm
Screw position
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
x 4
For a SIP-T46G IP phone:
126.6mm
86.9mm
x 4
Screw position
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
Max:4.5mm
(0.177”)
Copyright 2015 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
Following the drilling template above, you can mount
the IP phone to the wall, as shown below
(Take a SIP-T46G IP phone as an example):
You can also download the wall mount drilling template
online: http://www.yealink.com/Support.aspx.
For SIP-T29G/T27P IP phones:
For SIP-T42G/T41P IP phones:
102.5mm
73.5mm
46mm
Screw position
x 3
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
65mm
130mm
73mm
Screw position
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
x 3