Z3 Technology FV2K-1XA User manual

FV2K-1XA User Guide
Model Name: FV2K-1XA
DOC-USR-0262-05
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Copyright © 2023 Z3 Technology, LLC. All rights reserved.
Z3 Technology and ZEUS are registered trademarks of Z3 Technology, LLC.
This document contains proprietary information of Z3 Technology, LLC ("Z3"). This document may not be used, reproduced, disclosed, or
disseminated to anyone without the prior written approval of an authorized representative of Z3. Z3 reserves the right to change this product at
any time and without notice. All product names, trademarks, trade names, service marks, or service names mentioned in this document are the
property of their respective owners.

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
2
REVISION HISTORY
Version
Date
Change Note
Author
01
12/15/2021
Original Document for FV2K-1XA
NC
02
08/22/2022
Switched from 13A to 1XA to incorporate 15A iteration; full Sales
review
NC
03
-
Added from numbering scheme
NC
04
12/28/2022
Minor fixes
NC
05
1/25/2023
RS-422 Pinout Updates
NC

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
3
TABLE OF CONTENTS
1.0 GENERAL DESCRIPTION..............................................................................................8
2.0 FEATURES .............................................................................................................9
2.1 Supported Resolutions ..........................................................................................10
3.0 Cable OPTIONS..................................................................................................... 10
4.0 OPERATING CONTROLS ............................................................................................ 11
5.0 GETTING STARTED WITH THE FV2K-1XA ........................................................................ 12
5.1 Access the User Interface Using ZFinder .....................................................................14
5.2 Thermal Camera Configuration................................................................................16
6.0 STREAMING CONTROL ............................................................................................. 16
6.1 Stream UDP.......................................................................................................17
6.2 Stream RTP .......................................................................................................20
6.3 Stream RTSP......................................................................................................22
6.4 Stream RTMP .....................................................................................................26
6.5 Tuning for Latency...............................................................................................34
6.6 Stream Multiple Resolutions ...................................................................................36
6.7 Setting NTP.......................................................................................................37
6.8 Record to USB/Micro SD ........................................................................................37
6.9 Dual Stream and Record ........................................................................................40
6.10 Microphone Input ................................................................................................40
6.11 Composite Pass-Through........................................................................................41
6.12 Record Snapshot .................................................................................................43
7.0 CAMERA CONTROL ................................................................................................. 44
7.1 Zoom ..............................................................................................................45
7.2 Preview and Download Image..................................................................................45
7.3 PTZ ................................................................................................................47
7.4 Color Controls....................................................................................................52
7.5 Sony VISCA Camera Control ....................................................................................52
7.6 ONVIF Profile S & T ............................................................................................54
7.7 ONVIF® User Management ......................................................................................55
7.8 ONVIF® Fixed Profile Support ..................................................................................56
8.0 PERFORMING OTHER OPERATIONS WITH THE FV2K-1XA...................................................... 58
8.1 Save Current Settings ...........................................................................................58
8.2 Advanced Settings Mode........................................................................................59
8.3 Channel 2 PIP on Channel 1 ....................................................................................60
8.4 Encoder ROI ......................................................................................................62

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
4
8.5 Overlay Timestamp..............................................................................................62
8.6 Set a Static IP Address ..........................................................................................63
8.7 Upgrade Firmware...............................................................................................64
8.8 User Management ...............................................................................................66
8.9 Factory Reset ....................................................................................................67
9.0 DECODE OPTIONS .................................................................................................. 68
9.1 PC Configuration for HD HEVC/H.265 Decode...............................................................68
9.2 ZEUS® DMD-4K Decoder .........................................................................................71
9.3 ZEUS SME-01 Decode...........................................................................................71
10.0 SUMMARY OF OPTIONS ............................................................................................ 72
10.1 The System Setup Tab...........................................................................................72
10.2 The User Presets Tab ............................................................................................75
10.3 Users Tab..........................................................................................................75
10.4 The Status Tab ...................................................................................................75
10.5 The Camera Tab .................................................................................................76
10.6 The Term Tab.....................................................................................................79
10.7 The CH1 Tab (Channel 1) .......................................................................................81
10.8 The CH2 & CH3 Tabs (Channels 2 & 3)........................................................................86
10.9 Values Appearing at the Bottom of All Tabs..................................................................87
10.10 ZFinder ..........................................................................................................87
APPENDIX A: Finding the IP Address of Your Computer.............................................................. 89
APPENDIX B: Configuring the Wowza Server for RTMP .............................................................. 90
APPENDIX C: Example Camera Controller Application .............................................................. 92
APPENDIX D: Support and Troubleshooting ............................................................................ 96
Appendix D: Support .....................................................................................................96
Appendix D: Troubleshooting ...........................................................................................96
Appendix D: Warranty ...................................................................................................98

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
5
LIST OF FIGURES
Figure 1 FV2K-13A (Front) Dimensions ................................................................................. 8
Figure 2 FV2K-15A (left) and FV2K-13A (right) ........................................................................... 8
Figure 3 FV2K-1XA Package Content .....................................................................................10
Figure 4 FV2K-1XA Physical Module Connection (Cameras Not Included)...........................................12
Figure 5 Interface Front End PCB .........................................................................................13
Figure 6 ZFinder with the FV2K-1XA Selected..........................................................................14
Figure 7 FV2K-1XA User Interface – CH1 Tab............................................................................15
Figure 8 FPGA Configuration...............................................................................................16
Figure 9 CH1 Tab Configuration – UDP ...................................................................................18
Figure 10 VLC Open Network Stream Screen for UDP .................................................................19
Figure 11 Example of Video Streaming to VLC (UDP)..................................................................19
Figure 12 CH1 Tab Configuration – RTP ..................................................................................21
Figure 13 Example of Encoded Video Streaming to VLC (RTP) .......................................................22
Figure 14 CH1 Tab Configuration – RTSP.................................................................................23
Figure 15 Finding your Camera’s IP Address ............................................................................24
Figure 16 Force multicast RTP via RTSP..................................................................................25
Figure 17 VLC Open Network Stream Screen for RTP .................................................................25
Figure 18 Example of Z3 Video Streaming to VLC (RTSP) .............................................................26
Figure 19 CH1 Tab Configuration – RTMP Streaming to Wowza Streaming Engine™ ...............................28
Figure 20 Navigating to the Wowza Test Player ........................................................................29
Figure 21 Viewing Streamed Content on Wowza Test Player .........................................................30
Figure 22 YouTube Live Dashboard – Encoder Setup ...................................................................31
Figure 23 CH1 Tab Configuration – RTMP Streaming to YouTube Live ...............................................32
Figure 24 Facebook “Create Post” dialog box...........................................................................33
Figure 25 Facebook Live Streaming Dialog ..............................................................................33
Figure 26 Facebook Live Stream Encoder Settings .....................................................................34
Figure 27 Enable TS Lowlat Mode ........................................................................................35
Figure 28 VLC Media Player Tools Menu ..................................................................................35
Figure 29 VLC Media Player Advanced Preferences.....................................................................36
Figure 31 Create Additional Output Channels ..........................................................................36
Figure 32 Setting up NTP ...................................................................................................37
Figure 33 USB Connection .................................................................................................38
Figure 34 Micro SD connection ............................................................................................38
Figure 35 CH1 Tab Configuration – TSFILE..............................................................................39
Figure 36 Microphone Connection........................................................................................40

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
6
Figure 37 CH1 Tab Configuration – Microphone Audio Settings.......................................................41
Figure 38 Composite Connection .........................................................................................42
Figure 39 Select Source Option...........................................................................................42
Figure 40 Camera Zoom Slider............................................................................................45
Figure 41 Camera Tab Preview Image ...................................................................................46
Figure 42 Add PTZ Preset...................................................................................................47
Figure 43 Recall PTZ Preset................................................................................................48
Figure 44 Delete PTZ Preset ...............................................................................................49
Figure 45 Create PTZ Tour .................................................................................................50
Figure 46 Run PTZ Tour .....................................................................................................51
Figure 47 PTZ Absolute/Relative positioning on Term Tab Device....................................................51
Figure 48 Term Tab PTZ configuration....................................................................................52
Figure 49 Color Controls...................................................................................................52
Figure 50 Com2TCP Configuration .......................................................................................53
Figure 51 Camera Controller Software Configuration .................................................................54
Figure 52 ONVIF Device Manager page ...................................................................................55
Figure 53 New Password prompt ..........................................................................................55
Figure 54 Password change notice ........................................................................................56
Figure 55 User not authorized prompt ...................................................................................56
Figure 56 System Setup tab configuration ...............................................................................57
Figure 57 Channel 1 Tab configuration ...................................................................................57
Figure 58 Save preset option ..............................................................................................58
Figure 59 The User Presets Tab ...........................................................................................58
Figure 60 Entering a User Preset Name .................................................................................58
Figure 61 Saving a User Preset............................................................................................59
Figure 62 Accessing Advanced Settings ..................................................................................60
Figure 64 PIP Configuration................................................................................................61
Figure 65 Channel 1 Tab with ROI.........................................................................................62
Figure 66 CH1 Tab Overlay Timestamp ...................................................................................63
Figure 67 Saving Updated Network Settings ............................................................................64
Figure 68 Updating Device Firmware ....................................................................................65
Figure 69 Software Updater Screen......................................................................................65
Figure 70 Creating or Changing the Password ..........................................................................66
Figure 71 Password Entry Screen.........................................................................................67
Figure 72 Pinhole Reset.....................................................................................................67
Figure 76 LAV Filters Configuration ......................................................................................69

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
7
Figure 77 Disable Hardware Decoding in VLC ..........................................................................70
Figure 78 ZEUS DMD-4K Decoder ..........................................................................................71
Figure 79 ZEUS SME-01 H.264 Decoder ..................................................................................71
Figure 80 Term Tab Configuration.........................................................................................79
Figure 81 Using the Command Prompt to Determine Your PC’s IP Address.........................................89
Figure 82 Locating Your Computer’s IP Address ........................................................................89
Figure 83 Wowza Performance Settings .................................................................................90
Figure 84 Wowza Security Settings.......................................................................................91
Figure 85 Running the Example Application ............................................................................92

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
8
1.0 GENERAL DESCRIPTION
The FV2K-1XA is designed for dual camera inspection, surveillance, industrial and UAV applications. The
flexibility of the system allows for a dual LVDS visible camera or a visible camera and an infrared or night
vision camera. The hardware consists of a 2-board set: Encoder and Connector PCB. The system is capable of
encoding multiple channels of H.265 and H.264 video in HD resolutions. The Input board features flexible
digital and analog input ports. The encoder can be configured to stream over IP and simultaneously record
to USB or micro SD card. The FV2K-1XA is available with either software preloaded or with an optional SDK
starter kit.
Figure 1 FV2K-13A (Front) Dimensions
50 mm
75 mm
Figure 2 FV2K-15A (left) and FV2K-13A (right)

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
9
2.0 FEATURES
▪FV2K-1XA Features:
oH.264/H.265 encode and stream up to 1080p at 60 fps
oEncode modes of operation: H.265, H.264 and MJPEG
oLow bandwidth, low latency video encoding
oSimultaneously output three different resolutions from a single video source
oRemote camera control via HTTP-based interface or pass VISCA camera control commands over IP
oInputs: line audio
oOutputs: Composite, Micro HDMI
oAdditional Interfaces on the FV2K-13A include Gigabit Ethernet, USB 2.0, Micro SD Card and RS-
232 Serial, RS485, alarm input and output interfaces available internally
oSupports streaming in MPEG-2 TS (UDP), RTP, RTSP, RTMP and TSRTP
oSupports unicast and multicast streaming
oCompatible with CDN’s including Wowza Streaming Engine™ *, YouTube Live* and Facebook Live*
oRecord a compressed .ts/.mp4 file to a USB/SD storage device
oONVIFprofile S & T compliant
oCompatible with the ZEUSDMD-4K and Z3-SME-01 (also available from Z3 Technology)
oHTTP-based configuration software for user-friendly configuration, control and update
oRS-232 serial port for technical configuration and control
oSupports Power over Ethernet (PoE) when present (802.3af/at class 0)
oOperating Temp: -5 to 70 °C in open air at 20-80% relative humidity (non-condensing)
oStorage Temp: -20 to 80 °C at 20-80% relative humidity (non-condensing)
oMeasurements 75mm x 50mm (3 x 2in)

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
10
2.1 Supported Resolutions
The FV2K-1XA supports simultaneous output of up to three streams encoded at different resolutions,
frame rates and bitrates. Supported stream resolutions are:
1080p (2MP), 1280x1024, 720p (1MP), 480p, 576p, 1024x576, 704x576, 640x480, 640x360, 420x380,
352x576, 352x288, 352x240, 320x240, and 320x180
In addition to scaling the resolution, the camera is also capable of scaling down the frame rate to save
bandwidth. Each channel can select from full frame rate, half frame rate, quarter or sixth frame rate.
For example, it is possible to configure a primary stream of 1920x1080 at 60 fps simultaneously with a
secondary stream at 480p at 10 fps.
The maximum performance for three channels is two 1080p60 plus one 1080p30 stream.
3.0 Cable OPTIONS
All cables are sold separately from board set.
Figure 3 FV2K-1XA Cable Options
*NOTE: additional cables may be required to connect your secondary camera. Contact Sales for more
information about available cables and compatible cameras.
CBL-0028-01
12cm KEL Ribbon
Cable
12V 1 Amp AC Adapter
Serial Cable
Null Modem Adapter
Composite to Molex

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
11
4.0 OPERATING CONTROLS
1: RS-485 Serial Port
1
5: Status Light
2
2: USB 2.0 6: Composite Output
3: 12V Power (optional) 7: RS-232 Serial Port
4: Gigabit Ethernet 8: Line level Audio input (MIC)
1
For advanced debugging purposes only. Not needed by typical users.
2
LED light will blink green when streaming.
100Mb Composite GPIO
Ethernet OUT
Power Input
Serial interface
7
8

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
12
5.0 GETTING STARTED WITH THE FV2K-1XA
If you have received an FV2K-1XA assembly, you will need to connect it to the Sony FCB-EV7520A camera
block or a compatible LVDS camera. The Interface Front End PCB of the FV2K-1XA assembly (see Fig 4) has a
30-pin KEL connector that allows a flexible ribbon cable to be used to connect the encoder assembly to an
identical connector on the Sony FCB-EV7520.
(1) Connect the KEL ribbon cable to the Sony FCB-EV7520 block camera. (Gold teeth face up)
(2) Connect the other end of the KEL ribbon cable to the Interface Front PCB. (Gold teeth face away
from the PCB’s)
WARNING: Only use a Z3 approved KEL ribbon cable to connect Z3’s boards to the Sony camera. Using an
incorrect cable (the cables provided by Sony) can permanently damage the boards or camera
The KEL cable is sold separately by Z3 (ordering part number: CBL-0028-01).
WARNING: Use ONLY FCB-EV7520 LVDS or compatible camera with the FV2K-1XA. Using an incompatible
camera may permanently damage the camera and the FV2K-1XA.
Figure 4 FV2K-1XA Physical Module Connection (Cameras Not Included)
(1) Once received, the FV2K-1XA assembly will need to be connected to the Sony FCB-EV7520 HD camera
block and optional secondary camera with LVDS or Composite Out. The Interface Front End PCB of
the FV2K-1XA assembly (see Figure 5) has (2) 30-pin KEL connectors that allow a flexible ribbon cable
to be used to connect the encoder assembly to an identical connector on the Sony FCB-EV7250. The
first KEL connector, labeled “J5”, is used for Camera1. The second KEL connector, labeled “J7”, is
used for Camera2. Connect the primary Sony FCB-EV7520 HD camera to “J5”. The second KEL
connector “J7” supports either a secondary Sony HD camera, or an infrared LVDS camera (check with
Z3 for list of compatible IR cameras). The Composite secondary camera is connected to the FV2K-

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
13
1XA assembly via the Molex 1.25mm Connector labeled “J9”. The KEL cable (ordering part number:
CBL-0028-01) and the Molex to BNC cable are sold separately.
Figure 5 Interface Front End PCB
WARNING: ONLY USE THE CORRECT KEL RIBBON CABLE PROVIDED BY Z3 TECHNOLOGY.
Using an incorrect cable can permanently damage the camera body.
(2) Connect an Ethernet cable from the encoder ethernet port to a switch, router or other DHCP server
on the same network as your Windows PC.
(3) Connect the 12V power supply to +12V on the Encoder and plug into a power outlet.
If Power over Ethernet (PoE) is available, then no connection to the power supply is required.
It will then boot.
Primary KEL
Connector (J5)
Composite (J9)

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
14
5.1 Access the User Interface Using ZFinder
ZFinder is a PC utility that allows you to find any Z3 Technology product on your network. If you have
not yet downloaded this to your computer, go to Z3technology.com and login to your account.
(4) Verify your PC is set to DHCP. If it is set to a static IP address, ZFinder may be unable to discover
your camera.
Note: The FV2K-1XA is set to DHCP by default. If no DHCP server is available on the network, a static IP address of
192.168.0.120 and a netmask of 255.255.0.0 will be assigned. The IP address can be manually entered as
the URL in a browser window to access the user interface.
(5) Run the ZFinder PC utility on your PC. You may need to allow it past any firewalls or security
programs on your PC. The ZFinder window appears and completes a scan of the network. ZFinder
then lists all Z3 systems connected to the network. The FV2K-1XA appears.
(6) Click on the FV2K-1XA entry in the window to select it. This will cause the Edit Device, Open Device
and Flash LEDs buttons to activate.
Figure 6 ZFinder with the FV2K-1XA Selected
Note: Selecting Edit Device allows for manual changes to network settings. Edit device only provides a temporary
edit to allow the user to open the Web Gui. Once the Web Gui is accessed the User needs to go the System
Set-up tab, set the desired IP settings and select "Save”. The system will need to restart on the desired IP
settings for the update to be retained through a power cycle. See Section 10.10, ZFinder, for more

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
15
information.
Note: If the device appears in red, there is a network error, and network settings will need to be modified in
order to access the user interface.
(8) Click on Open Device. An internet browser window is opened in your default web browser (for best
results, Firefox or Chrome are recommended). If you need a password, the Users section will prompt to
change the default admin password. The default password is 'admin'. Weak passwords will not be
allowed. Enter the new admin password and click configure. The system will reboot when the new
password is submitted successfully.
(9) Upon reboot or if the default admin password has already been changed the user interface will
prompt for a username and password use 'admin' user with the password set in step (4). Once
authenticated the user interface will appear with the CH1 tab open.
Figure 7 FV2K-1XA User Interface – CH1 Tab

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
16
(7) By default, the system will have automatically started encoding. Click on the CH1 tab for channel
one configuration settings. If the encoder status message in the bottom right corner of the screen
shows RUNNING, you will need to click the stop or Stop All button in order to change any settings.
5.2 Thermal Camera Configuration
Go to the System Set-up tab. Use the FPGA option to configure a thermal camera.
Figure 8 FPGA Configuration
(1) Select Tau2 for Digital video from the Flir® Tau2 or Boson for Boson support
(2) Select Tamarisk for Digital video from the DRS Tamarisk®
(3) Select Composite if Analog or NTSC/PAL video from Flir® Tau2, DRS Tamarisk®, or another composite
video output
NOTE: For thermal camera setting requirements and additional encoder control options refer to the (FV2K, FV4K
and FSDI System Guide).
6.0 STREAMING CONTROL
This section gives step-by-step instructions on setting the FV2K-1XA to output and stream video using each
of the output format options: UDP, RTP, RTSP and RTMP. In addition to the FV2K-1XA, a Windows PC with the
VLC media player
3
downloaded or a hardware decoder. . Please see Section 9.0, Decode Options, for more
information on compatible decoders and PC configuration and requirements for H.265/HEVC decode at HD
3
VLC is an open source media player from the VideoLAN organization that can be downloaded for free online.

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
17
resolutions.
6.1 Stream UDP
6.1.1 UDP Camera Setup
Note: Settings in the user interface cannot be changed if the unit is currently encoding.
(1) If necessary, click on the Stop button in the Channel Controls section of the user interface CH1 tab
or the Stop All button in the lower right corner of the screen of any tab.
(2) Verify the Output Resolution is set to Follow Input to output the resolution that the camera is set
to.. If a lower resolution output is desired, select this in the dropdown menu and resizing will occur.
(3) Select the Video Codec you would like to use for your video encoding. In the pictured example
H265(HEVC) is selected.
(4) Under Output Setup, select UDP in the Output Format dropdown menu.
(5) Set Dest Address to:
a. the IP address of your PC that will be running the VLC media player. To determine the correct
IP address of your PC, see APPENDIX A: Finding the IP Address of Your Computer. In the
example pictured, 192.168.0.6 is used.
b. or a multicast address. An example multicast address would be 225.1.2.3. If you are on a
shared network, check with your Network Administrator.
(6) Make note of the value listed for Dest Port. This will be 8600 by default when your system is first
received.
Note: By default, a limited selection of video encoding settings are available in the user interface. See Section
8.2, “Advanced Settings Mode”, for more information on accessing additional settings.
(7) Click on the Start button. After a moment, the encoder status will change to RUNNING and the fields
that can not be changed while the system is runningwill appear in dark grey. The status LED on the
unit will blink green when streaming.

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
18
6.1.2 Run VLC to View UDP Stream
Note: Verify your PC is set up to handle decode of H.265 content at HD resolutions. See Section 9.1, “PC
Configuration for HD HEVC/H.265 Decode”, for more information.
(8) Open the VLC media player on your PC.
(9) Select the Media menu.
(10) Select Open Network Stream.
(11) Under the Network tab, enter “udp://@Dest_Address:Dest_Port” for the network URL.
c. Dest_Address will be values of the IP address or multicast address entered in the Dest
Address field in the user interface CH1 tab. The IP address used in this example is
192.168.0.6.
d. Dest_Port will match the value found in the Dest Port field in the Encoder tab. The default
value is 8600.
e. In this example, the full network URL would be “udp://@192.168.0.6:8600”.
Figure 9 CH1 Tab Configuration – UDP
(4) Change
to “UDP”
(1) If necessary, click “Stop”
(7) Click “Start”
(2) Verify is
“Follow input”
(3) Verify is
“H265(HEVC)”
(5) Set to PC
IP Address or
Multicast Address
(6) Note value

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
19
(12) Press Enter or click Play.You will see your camera’s video streaming to VLC.
Figure 11 Example of Video Streaming to VLC (UDP)
Figure 10 VLC Open Network Stream Screen for UDP

FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
20
6.2 Stream RTP
6.2.1 RTP Camera Setup
Note: Settings in the user interface cannot be changed if the unit is currently encoding.
(1) Return to the user interface, and if necessary, click on the Stop button in the Channel Controls
section of the user interface CH1 tab or the Stop All button in the lower right corner of the screen of
any tab.
(2) Verify Output Resolution is set to Follow Input to output a HD stream. If a lower resolution output is
desired, select this in the dropdown menu and resizing will occur.
(3) Select the codec you would like to use for your video encoding. In the pictured example,
H265(HEVC) is selected.
(4) Under Output Setup, select RTP in the Output Format dropdown menu.
Note: By default, a limited selection of video encoding settings are available in the user interface. See Section
8.2, “Advanced Settings Mode”, for more information on accessing additional settings.
(5) Click on the Start button. After a moment, the encoder status will change to RUNNING and the fields
that cannot be changed while the system is running will appear in dark grey. The status LED on the
unit will blink green when streaming.