Zebex Z-3052 User manual

i
Copyright © 2007. All rights reserved.
No warranty of any kind is made in regard to this material, including, but not
limited to, implied warranties of merchantability or fitness for any particular
purpose. We are not liable for any errors contained herein nor for incidental
or consequential damages in connection with furnishing, performance or use
of this material. We shall be under no liability in respect of any defect arising
from fair wear and tear, willful damage, negligence, abnormal working
conditions, failure to follow the instructions and warnings, or misuse or
alteration or repair of the products without written approval. No part of this
document may be reproduced, transmitted, stored in a retrieval system,
transcribed, or translated into any human or computer or other language in
any form or by any means electronic, mechanical, magnetic, optical,
chemical, biological, manual or otherwise, except for brief passages which
may be quoted for purposes of scholastic or literary review, without express
written consent and authorization. We reserve the right to make changes in
product design without reservation and without notification. The material in
this guide is for information only and is subject to change without notice.All
trademarks mentioned herein, registered or otherwise, are the properties of
their various, ill, assorted owners.
General handling precautions
yDo not dispose of the scanner in fire.
yDo not put the scanner directly in the sun or by any heat source.
yDo not use or store the scanner in a very humid place.
yDo not drop the scanner or allow it to collide violently with other objects.
yDo not take the scanner apart without authorization.

ii
Table of Contents
Instructions..............................................................................................................1
1.Getting Started
Unpacking...................................................................................................2
Scanner Outline..........................................................................................3
Disconnecting the cable..............................................................................4
Connecting to a host...................................................................................4
Assembling of optional stand......................................................................5
Testing scanning.........................................................................................6
What’s on the CD-ROM ..............................................................................6
Scanner setup.............................................................................................7
Operation....................................................................................................7
Scanning in handheld mode .......................................................................8
Aiming.......................................................................................................10
Settings and Programming .......................................................................11
Programming options................................................................................11
Default factory device settings..................................................................11
2.User references..................................................................................................12
Set default parameter................................................................................12
Parameter scanning..................................................................................12
Beeper tone ..............................................................................................12
Beeper volume..........................................................................................13
Trigger modes...........................................................................................14
Power modes............................................................................................15
Time delay to low power mode..................................................................15
Decode session timeout............................................................................16
Timeout between decodes, same symbol.................................................17
Beeper after good decode.........................................................................17
Presentation mode session timeout..........................................................18
3.Imager preferences ............................................................................................18
Decode mode............................................................................................20
Snapshot mode.........................................................................................20
Video mode...............................................................................................21
Focus mode ..............................................................................................21
Decoding auto exposure...........................................................................22
Decoding illumination................................................................................22
Decode aiming pattern..............................................................................23
Image capture auto exposure ...................................................................23
Image capture illumination........................................................................24
Gain ..........................................................................................................24
Exposure time...........................................................................................25
LED illumination........................................................................................26
Snapshot mode timeout ............................................................................26
Snapshot aiming pattern ...........................................................................27
Image cropping .........................................................................................27
Crop to pixel addresses.................................................................28
Image resolution........................................................................................29
JPEG image options......................................................................30

iii
JPEG quality and size value..........................................................30
Image file format selector ..............................................................31
Bits per pixel..................................................................................31
Signature capture..................................................................................32
Signature capture file format selector............................................33
Signature capture bits per pixel.....................................................33
Signature capture width.................................................................34
Signature capture height................................................................34
Signature capture JPEG quality.....................................................34
Video view finder.....................................................................................35
Target video frame size..................................................................35
Video view finder image size .........................................................36
4.Serial interface ...................................................................................................37
Serial parameter defaults..........................................................................37
Serial host parameters..............................................................................39
Serial host types............................................................................42
Baud rate.......................................................................................43
Parity .............................................................................................45
Stop bit select................................................................................46
Data bits ........................................................................................46
Check receive errors .....................................................................47
Hardware handshaking..................................................................48
Software handshaking...................................................................50
Host serial response time-out........................................................52
RTS line state................................................................................53
Beep on <BEL>.............................................................................53
Intercharacter delay.......................................................................54
Nixdorf beep / LED options............................................................55
Ignore unknown characters ...........................................................55
ASCII character set for serial hosts...........................................................56
5.USB interface.....................................................................................................61
Introduction...............................................................................................61
USB host parameters................................................................................62
Symbol native API (SNAPI) status handshaking.......................................63
USB country keyboard types (Country codes) ..........................................63
USB keystroke delay.................................................................................65
USB CAPS lock override...........................................................................65
USB ignore unknown characters...............................................................66
Emulate keypad ........................................................................................66
USB keyboard FN 1 substitution...............................................................67
Function key mapping...............................................................................67
Simulated caps lock..................................................................................68
Convert case.............................................................................................68
ASCII character set for USB .....................................................................69
6.Symbologies .....................................................................................................80
Introduction...............................................................................................80
Symbology parameter defaults..................................................................81
UPC/EAN..................................................................................................86
Enable/Disable UPC-A ..................................................................86

iv
Enable/Disable UPC-E ..................................................................86
Enable/Disable UPC-E1 ................................................................86
Enable/Disable EAN-8/JAN-8........................................................87
Enable/Disable EAN-13/JAN-13....................................................87
Enable/Disable Bookland EAN......................................................87
Decode UPC/EAN/JAN supplemental ...........................................88
UPC/EAN/JAN supplemental redundancy.....................................90
Transmit UPC-A check digit...........................................................90
Transmit UPC-E check digit...........................................................91
Transmit UPC-E1 check digit.........................................................91
UPC-A preamble............................................................................92
UPC-E preamble ...........................................................................93
UPC-E1 preamble .........................................................................94
Convert UPC-E to UPC-A..............................................................94
Convert UPC-E1 to UPC-A............................................................95
EAN-8/JAN-8 extend .....................................................................95
UCC coupon extended code..........................................................96
Code 128 ..................................................................................................97
Enable/Disable Code 128..............................................................97
Enable/Disable UCC/EAN-128......................................................97
Enable/Disable ISBT 128...............................................................98
Code 39 ....................................................................................................99
Enable/Disable Code 39................................................................99
Enable/Disable Trioptic Code 39 ...................................................99
Convert Code 39 to Code 32.......................................................100
Code 32 prefix.............................................................................100
Set lengths for Code 39...............................................................101
Code 39 check digit verification...................................................102
Transmit Code 39 check digit ......................................................103
Code 39 full ASCII conversion.....................................................103
Code 39 buffering (Scan & Store)................................................104
Code 93 ..................................................................................................107
Enable/Disable Code 93..............................................................107
Set lengths for Code 93...............................................................107
Code 11...................................................................................................109
Enable/Disable Code 11..............................................................109
Set lengths for Code 11...............................................................109
Code 11 check digit verification...................................................110
Transmit Code 11 check digits..................................................... 111
Interleaved 2 of 5 (ITF)............................................................................112
Enable/Disable Interleaved 2 of 5................................................112
Set lengths for Interleaved 2 of 5.................................................112
I 2 of 5 check digit verification......................................................114
Transmit I 2 of 5 check digit.........................................................114
Convert I 2 of 5 to EAN-13...........................................................115
Discrete 2 of 5 (DTF)...............................................................................115
Enable/Disable Discrete 2 of 5 ....................................................115
Set lengths for Discrete 2 of 5 .....................................................116
Codabar (NW-7)......................................................................................118

v
Enable/Disable Codabar..............................................................118
Set lengths for Codabar...............................................................118
CLSI Editing.................................................................................120
NOTIS Editing..............................................................................120
MSI ........................................................................................................121
Enable/Disable MSI.....................................................................121
Set lengths for MSI......................................................................121
MSI check digits ..........................................................................123
Transmit MSI check digit(s) .........................................................123
MIS check digit algorithm.............................................................124
Postal Codes...........................................................................................125
US Postnet ..................................................................................125
US Planet ....................................................................................125
UK Postal.....................................................................................126
Transmit UK Postal check digit....................................................126
Japan Postal................................................................................127
Australian Postal..........................................................................127
Dutch Postal................................................................................128
Transmit US Postal check digit....................................................128
RSS (Reduced Space Symbology) .........................................................129
RSS-14........................................................................................129
RSS Limited.................................................................................129
RSS expanded ............................................................................130
Convert RSS to UPC/EAN...........................................................130
Composite...............................................................................................131
Composite CC-C .........................................................................131
Composite CC-A/B......................................................................131
Composite TLC-39.......................................................................132
UPC composite mode..................................................................133
Composite beep mode ................................................................134
UCC/EAN Code 128 emulation mode for UCC/EAN composite codes
....................................................................................................135
2D symbologies.......................................................................................136
Enable/Disable PDF417 ..............................................................136
Enable/Disable MicroPDF417......................................................136
Code 128 emulation ....................................................................137
Data Matrix..................................................................................138
Maxicode.....................................................................................138
QR Code......................................................................................138
Redundancy level....................................................................................139
Redundancy level 1.....................................................................139
Redundancy level 2.....................................................................139
Redundancy level 3.....................................................................139
Redundancy level 4.....................................................................139
Security level...........................................................................................141
Intercharacter gap size................................................................142
Report version.........................................................................................142
Macro PDF features ................................................................................143
Macro PDF user indications.........................................................143

vi
Macro PDF transmit / Decode mode symbols .............................144
Transmit Macro PDF control header............................................145
Escape characters.......................................................................146
Flush Macro buffer.......................................................................146
Abort Macro PDF entry................................................................146
7.Miscellaneous scanner options ........................................................................147
Introduction..............................................................................................147
Miscellaneous scanner parameter defaults .............................................148
Miscellaneous scanner parameters.........................................................149
Transmit code ID character .........................................................149
Prefix/Suffix values......................................................................150
Scan data transmission format....................................................151
FN1 substitution values ...............................................................152
Transmit “No Read” message......................................................152
8.Maintenance ....................................................................................................153
Appendix A
Standard default parameters ...................................................................154
Appendix B
Symbol code identifiers ...........................................................................163
AIM code identifiers.................................................................................164
Appendix C
Sample barcodes.....................................................................................169
Appendix D
Numeric barcodes ...................................................................................171
Appendix E
ASCII character set .................................................................................173

1
Introduction
Featuring a powerful image sensor for powerful optical performance, the
Handheld 2D Image Reader is ideal for both 1D and 2D scanning situations.
The reader uses laser aiming and LED illumination, and LED illumination
and can switch between two focus positions for extended working range or
for more precise focusing in high-density bar code decoding or digital picture
taking
With its sturdy ABS plastic construction, sleek, ergonomic styling, and light
weight, the Handheld 2D Image Reader reduces user fatigue, making it easy
to use even in high-volume scanning situations. The Handheld 2D Image
Reader also features best-in-class decoding capabilities, boasting over 20
recognized 1D, postal, and 2D codes, including EAN-UCC composite codes
and PDF 417 matrix codes.
The Handheld 2D Image Reader has advanced features and thoughtful
design that make it ideally adapted to a wide variety of business,
manufacturing, service, and scientific needs.

2
Unpacking
The Handheld 2D Image Reader package should contain:
1 ea. Handheld 2D Image Reader
1 ea. Communication Cable
1 ea. Power Adapter (optional)
1 ea. CD-ROM Support Disk
If any package contents are damaged or missing, please contact your dealer
immediately.
Please leave this Users' Manual within easy access of person using the
scanner.

3
ScannerOutline
The LED indicator on the top of the scanner unit glows red when power is on.
When a barcode is successfully decoded, the LED flashes green and blue
LED and the buzzer sounds.

4
DisconnectingTheCable
Prior to removing the cable from the scanner, it is highly advised that the power
of the host system is turned off, and
power supply disconnected from the cable.
1. Locate the small hole at the bottom of the scanner.
2. U se a metallic pin and insert into the hole.
3. Gently pull the strain-relief of the cable once a faint “click” is heard.
ConnectingtoaHost
The Handheld 2D Image Reader supports both USB and RS-232
communications. Select a Communications Cable appropriate to your host.
1. Insert the plug on the free end of the Communications Cable into the
appropriate connector on the host.
2. Insert the small plug terminating the Power Adapter wire into the socket
on the side of the Communications Cable. (Only applicable to RS-232
interface)
3. Plug the Power Adapter into an outlet

5
AssemblingtheOptionalStand
The optional self-supporting stand is to facilitate the usage of your scanner.
It moves freely and can be placed anywhere on countertops.
It can be tilted
to a maximum of 60
degrees.
To attach the scanner to the optional stand, hook the scanner on the two holes
located at the front of the stand.

6
TestScanning
1. Ensure all connections are secure, power is connected, and the LED is
red, indicating standby position.
2. Aim the scanner at a barcode within range. Assuming the scanner is in
trigger mode (default), press the trigger.
3. On successful decode, the scanner beeps and the LED flashes green.
1. Do not hold the scanner directly over a barcode. At 90°, scanning light
can bounce directly back into the scanner from the barcode area as
specula reflection, creating a "dead zone" where decoding is, at best,
difficult. Instead of a 90° head-on approach, tilt the scanner up to 65°
forward or backward to achieve a successful decode. Practice a few
times to find what range of angles works best.
What’sontheCD-ROM
The CD-ROM that accompanies the Handheld 2D Image Reader contains
three directories:
♦Drivers, which contains USB drivers for various versions of Windows,
♦Docs, which contains documentation, primarily this manual in file form,
and
♦Two software applications: a setup program that makes for convenient
setup of the parameters on the Handheld 2D Image Reader, and a
keyboard emulator (keyboard wedge), for situations where you want
scanned information to appear to the connected host as keyboard
entries.
Install the USB drivers on the machine that will host the Handheld 2D Image
Reader.
Install the configuration Setup utility on any PC that you want to use for
configuring a Handheld 2D Image Reader.

7
ScannerSetup
You can configure the scanner either via the Setup utility provided on the
CD-ROM, or by scanning the setup codes provided in this manual under
Settings and Programming. The setup utility is usually more convenient, but
the printed setup codes are supplied for those times when a PC with the
necessary utility is not immediately at hand.
Operation
Operation of the Handheld 2D Image Reader is pretty intuitive. Assuming
that the necessary host and power adapter connections are made for
standard operation, simply aim the scanner at the intended code patch and
pull the trigger. As soon as the read is successful, the code is transmitted to
the host, the LED lights green, the beeper beeps, and the scanner waits for
the next scan.
These are all adjustable. In always on (presentation) mode, the scanning
lights remain on, and no trigger pull is required.
The beeper can be disabled, or can be programmed to beep only after a set
number of barcodes are read.
In addition to the broader scan field light, the Handheld 2D Image Reader
has a target beam function that makes it clear exactly where the scanner is
pointing.
To use targeting, first enable the function by scanning the "Enable targeting
LED" code found later in this manual. Then, when the target beam is desired,
squeeze and hold the trigger for a couple seconds. The target beam turns on,
showing the exactly where the scanner is pointing.
Scan Field LEDs Only Scan Field LEDs
and target LEDs

8
Scanning in Hand-Held Mode
Install and program the digital scanner.
Scanning with the Scanner
1 Ensure all connections are secure (see the appropriate host chapter.)
2 Aim the digital scanner at the bar code.
3 When the digital scanner senses movement, in its default Auto Aim trigger
mode, it projects a red laser aiming pattern (shown as below) which allows
positioning the bar code or object within the field of view. (To turn off the
default Auto Aim trigger mode.
If necessary, the digital scanner turns on its red LEDs to illuminate the
target bar code.
4 Center the symbol in any orientation within the aiming pattern. Be sure the
entire symbol is within the rectangular area formed by the brackets in the
pattern.

9
5 Hold the trigger until the digital scanner beeps, indicating the bar code is
successfully decoded. For more information on beeper and LED
definitions.
This process usually occurs instantaneously. Steps 2 - 4 are repeated on
poor quality or difficult bar codes, until the bar code is decoded, the trigger
is released, or the Decode Session Timeout is reached.

10
Aiming
Hold the digital scanner between two and nine inches from the symbol,
centering the aiming pattern cross hairs on the symbol.
The aiming pattern is smaller when the digital scanner is closer to the
symbol and larger when it is farther from the symbol. Scan symbols with
smaller bars or elements (mil size) closer to the digital scanner, and those
with larger bars or elements (mil size) farther from the digital scanner.
The digital scanner can also read a bar code presented within the aiming
pattern but not centered. The top examples show below acceptable aiming
options, while the bottom examples can not be decoded.

11
SettingsandProgramming
Scan a series of selected barcode patches printed in this manual to affect
setup and programming of your Handheld 2D Image Reader. Decoding
options and interface protocols can be tailored to a specific application.
Setup parameters are stored in non-volatile memory in the scanner and are
retained even when power is off. Setup parameters change only when you
reset them.
You may need to hide adjacent code patches with your hand when scanning.
ProgrammingOptions
This section contains the following two divisions:
♦Default factory device settings.
♦Supported symbologies.
Defaultfactorydevicesettings
User Preferences Default Table
Parameter
User Preferences
Set Default Parameter All Defaults
Parameter Scanning Enable
Beeper Tone Medium
Beeper Volume High
Trigger Modes Level
Power Mode Low Power
Time Delay to Low Power Mode 1.0 Sec
Decode Session Timeout 9.9 Sec
Timeout Between Decodes, Same Symbol 0.6 Sec
Beep After Good Decode Enable
Presentation Mode Session Timeout 2 Seconds

12
User Preferences
Set Default Parameter
Scan this bar code to return all parameters to the default values.
Set All Defaults
Parameter Scanning
To disable decoding of parameter bar codes, scan the Disable Parameter
Scanning bar code below. Note that the Set Defaults parameter bar code can
still be decoded. To enable decoding of parameter bar codes, either scan
Enable Parameter Scanning or Set All Defaults.
Enable Parameter Scanning
Disable Parameter Scanning
Beeper Tone
To select a decode beep frequency (tone), scan the Low Frequency, Medium
Frequency, or High Frequency bar code.
Low Frequency
Medium Frequency (Optimum
Setting)
High Frequency

13
Beeper Volume
To select a beeper volume, scan the Low Volume, Medium Volume, or High
Volume bar code.
Low Volume
Medium Volume
High Volume