ZENEC ZE-NC524 User manual

2-DIN NAVICEIVER
15.5cm/6.1" LCD DISPLAY
MODEL N0:
USER MANUAL
English

2
TABLE OF CONTENTS
TABLE OF CONTENTS .............................................................................................................................................. 2
INTRODUCTION ........................................................................................................................................................ 3
WARNINGS ................................................................................................................................................................. 4
PANEL CONTROLS ................................................................................................................................................... 6
REMOTE CONTROLS................................................................................................................................................ 7
BASIC OPERATION ................................................................................................................................................... 9
DISC OPERATION .................................................................................................................................................... 10
TUNER OPERATION ................................................................................................................................................. 14
USB/SD CARD OPERATION .................................................................................................................................... 16
iPod OPERATION ...................................................................................................................................................... 17
BLUETOOTH OPERATION ....................................................................................................................................... 18
OTHER MODES ....................................................................................................................................................... 20
SYSTEM SETUP ...................................................................................................................................................... 21
DEVICE CONNECTIONS ......................................................................................................................................... 25
INSTALLATION ......................................................................................................................................................... 27
TROUBLESHOOTING .............................................................................................................................................. 28
SPECIFICATIONS ..................................................................................................................................................... 30
APPENDIX ..................................................................................................................................................................31
WARRANTY ............................................................................................................................................................... 34

DEUTSCH
DEUTSCH
ZE-NC524
3
INTRODUCTION
Dear customer,
thank you for purchasing the ZE-NC524 naviceiver. You acquired a multifunctional car
multimedia center which is able to playback  les from a huge number of formats and disc
structures. It can be extended with the DVB-T-receiver ZE-DVB 2000. You can directly
connect an iPod and play all formats the handheld can, when it is connected. The
navigation unit supports all up-to-date features like TMC and (with an additional license)
TMC Pro as well.
SUPPORTED FORMATS AND DISC STRUCTURES:
The unit has been tested with, but is not limited to, the following encoding standards:
DVD, DVD-R, DVD+R, DVD-RW, CD, CD-R, VCD, DVCD, CDDA, Picture-CD (JPG), MP3,
WMA, XVID, DivX.
 PLEASE NOTE:
Before installation remove the two screws on top of the device or the DVD drive will not
work properly..
Remove
two screws
Trim Frame
Main Unit

4
WARNINGS
1. Only connect this unit to a 12V DC power supply with
negative grounding.
2. Never install this unit at a place where it could interfere with
your overview during driving. It is designed for the center
console.
3. Do not circumvent the security function which prevents you
from watching a movie using the front display when you are
driving. It' s a dangerous distraction and may also con ict
with your local law or even void your insurance.
4. Never expose this unit, the ampli er or the speakers to
moisture or water to prevent electronic short-circuiting
causing sparks or  re.
5. Please don‘t change the fuse in the power cord without
professional guidance, improper fuse may cause damage
to this unit or may even cause a  re.
6. Please power off this unit at once and send it back to the
after-sales service center or the dealer/distributor you
purchased it from if one of the following symptoms is found:
(a) Water or objects which got into the unit;
(b) Smoke;
(c) Peculiar smell.
7. To ensure secure driving, please adjust the volume to a
safe level. It may be vital if an emergency situation occurs
suddenly, cause you are expected to still hear the siren.
8. Class 1 Laser: Invisible Laser radiation is present when
casing is open, avoid exposure of eyes to beam. Servicing
of the unit only by authorised ZENEC technicians.

DEUTSCH
DEUTSCH
ZE-NC524
5
WARNINGS
PRECAUTIONS
1. Never disassemble or adjust the unit without any professional guide. For details, please
consult an authorized ZENEC dealer.
2. lf the front panel or TFT monitor needs to be cleaned, please use a clean silicone cloth
and a neutral detergent. Using a rough cloth and non-neutral detergent or all solvents (i.e.
ethanol, benzene) for cleaning may result in damage or discoloration.
3. lf any abnormal behaviour of the unit is found, please refer to the trouble shooting guide.
In case you can't determine the cause of the failure , you can always try to press the
[RESET] key on the front panel to restore factory defaults. If that doesn't help either
contact your local authorized ZENEC dealer.
4. lf you park the car for a longer time period under extreme temperatures (both extreme hot
and cold), you should refrain from switching it on immediately. Rather wait until the cabin
temperature has reached a range between minus  ve and plus forty degrees Centigrade.
5. Using in-car heater in low temperature environment may result in condensation inside the
unit. DO NOT use the unit in this situation, eject the disc and wipe off the condensation
on the disc. lf the unit still doesn't work after a few hours, please contact with after-sales
service center.
6. To prevent damage to the screen, avoid touching it with sharp objects.
7. If the software version on your unit has been updated the icons used for this documentation
may differ from the actual images displayed on the screen.
8. Operate the unit according to this information to prevent unnecessary problems or
dangers. Be aware that you also risk your warranty if you don't use the unit in compliance
with this manual.
DECLARATION
This product incorporates copyright protection technology that is protected by U.S patents
and other intellectual property rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.

6
PANEL CONTROLS
START CODE: 012345 (Description: Page 9, 24)
FRONT PANEL
Press the ( ) button to turn on the unit.
1. Power on
Mute
When on, long press to power off.
2. Screen ON/OFF. Keep pressed to toggle
between Navigation and Play.
3. Keep pressed for Main Menu.
Repeated short press:
Select the following sources
Radio
Disc (when a disc is inserted)
USB (when some USB data carrier is
connected)
AV1 (rear A/V In)
AV2 (front A/V In)
Bluetooth
iPod
DVB-T (optional)
Navigation (long press)
4. Microphone
5. Rotate to adjust volume level.
Press to enter Equalizer setting menu.
Press and hold it to enter setting mode.
6. USB slot
7. Map card slot
8. Reset
9. AV-In jack
10. Touch panel
11. Eject disc (when disc inserted)
Reset the mechanism (long press)
12. Remote sensor
13. Disc slot
 SAFETY NOTES:
■ The DVD video display of the center console unit will not operate while the vehicle is
moving. This is a safety feature to prevent the driver from being dangerously distracted.
The DVD video functions will only work on the front screen, when the vehicle has been
stopped and the parking brake is engaged. It is illegal in most countries for the driver
to view video while the vehicle is in motion. Optional headrest monitors for the back
passengers will, however, always work.
NAV

DEUTSCH
DEUTSCH
ZE-NC524
7
REMOTE CONTROL OPERATING RANGE
The remote control can operate within a
distance of 3~5 m.
Press ( ) to turn on/off the unit.
REMOTE CONTROLS
1. Select the following sources:
Radio
Disc (when a disc is inserted)
USB (when USB drive is connected)
AV1 (rear A/V In)
AV2 (front A/V In)
Bluetooth
Navigation
iPod
DVB-T
2. Radio preset scan
Radio auto preset
3. Menu (DVD)
4. Title (DVD)
5. Go to search
6. Radio band
Video System PAL/NTSC/AUTO
7. Sound/display setting
8. System setup
9. Fast reverse/forward playback
10. Zoom (DVD/VCD)
Dial/Receive call
11. Enter
12. Menu Cursor
13. Stop/Return
14. Digit area
15. Enter main menu
16. Power on/off
17. Angle (DVD)
18. DVD subtitle
19. A-B repeat
20. Repeat
21. On-screen display
22. Track random play
23. Radio tune
Track skip/seek
24. Call off/cancel
Program
25. Volume
26. Play/Pause
27. Mute
28. DVD audio
VCD audio L/R/ST

8
REMOTE CONTROLS (COnTinUED)
REPLACING THE LITHIUM BATTERY OF THE REMOTE CONTROL UNIT
■ When the operation range of the remote control deteriorates or it has no function at all,
replace the lithium battery type 2025 with a new one.
1. Open the back cover of the remote control unit.
2. Insert the button-type battery with the stamped (+) mark facing upwards, directly under
the small metal tongue. Close the back cover.
 WARNING:
■ Store the battery where children cannot reach it. If a child accidentally swallows the
battery, consult a doctor immediately.
■ Do never ever recharge, short-circuit, disassemble or heat up the battery nor dispose it
in  re as this might cause it to explode. Lithium batteries, even more than other battery
types, are prone to explode when they become excessively hot.
■ Do not expose or bring the battery into contact with any other metallic material as it will,
most likely, short-circuit the battery.
■ For the very same reason, when throwing away or storing the battery, wrap it in tape or
insulate it somehow.

DEUTSCH
DEUTSCH
ZE-NC524
9
BASIC OPERATION
PASSWORD
If you power-on the unit for the  rst time you
need to enter a password. You will also need
to re-enter it every time the unit has been
disconnected from the power supply or when
the battery has been removed or replaced.
Type "012345" (default), using the numeric
on-screen display. Touch to erase
previous number. Touch to con rm.
TURN ON/OFF THE POWER
1. Press the ( ) button to switch on the unit.
■ The unit resumes with the status it had
before it was powered off.
2. When on, press the ( ) button at least
two seconds to switch off the unit.
MUTE
Press the PWR button very brie y to toggle
the sound off and on.
 NOTE:
■ MUTE will be displayed on-screen during
muting.
ADJUST THE VOLUME
Rotate the VOL knob to increase or decrease
the volume level.
The adjustable range is 0 to 39.
PLAYING SOURCE SELECTION
Method 1:
■ Press SRC button on the panel or remote
control to cycle through all the available
sources.
Method 2:
■ Open the 'Main menu' by keeping SRC
pressed at the top left corner of the TFT
or press MODE button on remote control,
and then touch the desired option or
select the option by moving the cursor
and then con rm. Touch / on the TFT
to show other options of the main menu.
 NOTES:
■ Devices which are not ready or not
connected cannot be chosen and the
icons will be grayed out.
■ When entering DVD mode allow the DVD
reader up to an entire minute to initialise.
It will auto-enter the DVD-menu if a DVD
is inserted.
PARKING BRAKE DETECTOR
1. The 'PRK SW' cable is connected to the
hand brake switch in order to blank the
DVD screen when the handbrake is not
engaged.
2. If you try to watch a video with the
handbrake released you will see
""WARNING!" Engage Parking Brake to
View Video" on-screen. No video will be
shown on the console screen. Optional
headrest monitors for the backseat
passengers will, however, function
normally.
WHEN REVERSE DRIVING
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit
returns to it´s previous work after the reverse
driving is done.

10
DISC OPERATION
INSERT A DISC
Insert a disc into the slot, and the unit will
change automatically to disc mode.
 NOTES:
■ Please check, if there is already a
disc in the unit before you try to insert
another one.
■ The unit will exit current playing source
and enter DVD mode when a disc is
inserted.
■ Some recorded discs, such as CD-R,
CD-RW, DVD-R, DVD + R, DVD-RW,
DVD+RW can only be played, when they
are closed after recording (i.e. “close
session and disc”).
EJECT THE DISC
Press button to eject the disc.
 NOTES:
■ After ejecting the disc, the unit reverts
automatically to the previously used mode.
■ You can eject a disc even when the unit
is switched off. The unit remains switched
off after the disc is ejected.
■ If the disc is not removed from the unit
within 10 seconds, it will be reloaded to
prevent accidental damage.
USING THE TOUCH SCREEN CONTROLS
The touch key areas for CD/VCD/DVD
playback are outlined below:
A - Turn to main menu
B - Display on screen control menu
DISC PLAYBACK
1. After a disc is inserted, the display will
show READ. For MP3 or discs with mixed
 les, the initial reading time may even
exceed one minute. Just give it a little time.
2. ERROR will be displayed if a disc read
error occurs during disc operation.
3. The unit will auto-recognize the inserted
medium (CD, VCD, DVD, etc.) and display
the respective icon.
4. If you insert a DVD it advances to the
title screen. Now you can easily start it by
pressing [play].
FILE TYPES/SUPPORTED FORMATS
Audio  le: MP3(*.mp3), WMA(wma)
Video  le:
XVID
DivX
MPEG 2 (*.vob)
MPEG 1 (*.dat)
Picture  le: JPEG (*.jpg)
Picture CD
MP3  le:
Supported sampling frequency for MP3 disc:
8KHz to 48KHz (44.1 KHz preferably).
Supported bit-rates of MP3 disc are: 32 - 320
kbps (128 kbps preferably).
DISC AND FILE TYPES WHICH ARE NOT
SUPPORTED
*.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO  les
and  les with DRM. Discs with left open
sessions.
STOP PLAYBACK TEMPORARILY
■ During playback, press to pause play-
back.
■ The sound will be muted and "PAUSE" is
displayed.
■ Press again to continue playback.
STOP PLAYBACK ENTIRELY
During DVD, VCD, CD, MP3 playback:
1. Press ■ key on remote control once to
stop the playback including saving of the
relevant location on the disc, press to
resume the playback from the saved disc
location.
2. Press ■ twice to cease the playback.
Press to start the playback from the
very beginning, the title page of the DVD
or the  rst track of VCD / CD.

DEUTSCH
DEUTSCH
ZE-NC524
11
DISC OPERATION (COnTinUED)
SELECT DESIRED TRACK
■ Press  or  to skip to the next or the
previous track.
■ Use 1-9 and 0, 10+ buttons on the remote
control to select the desired track number.
FAST FORWARD/BACKWARD DURING
PLAYBACK
Press  or  for more than 2 seconds once
and repeat to select X2, X4, X8 or X20 speed
of fast backward or forward playback.
■ During the fast forward or backward
operation, press brie y to playback
again.
■ During the fast forward or backward
operation, the volume will be muted.
RANDOM TRACK PLAYBACK (FOR CD/
VCD/MP3 ONLY)
You can play all the tracks in random order.
1. During playback, press once or
more to choose SHUFFLE, SHUFFLE
DIR or SHUFFLE OFF.
2. Press again to select normal
playback.
REPEAT
During playback, press once or more.
■ REP icon will appear on the display.
■ For VCD/CD: Display appears REP ONE
➞ REP ALL ➞ REP OFF
■ For DVD: Display appears REP
CHAPTER ➞ REP TITLE ➞ REP OFF
■ For File disc: Display appears REP ONE
➞ REP DIR ➞ REP ALL ➞ REP OFF
 NOTE:
■ If you do not select RPT on, when
the entire disc or TITLE playback has
 nished, the system will stop. After idling
more than  ve minutes the unit will go
into standby mode.
GOTO
Go directly to desired track/chapter or time
point of DVD video.
Press GOTO button on the remote control,
track or DVD title/chapter and time display on
top of the screen. Current item is highlighted.
Use / to select desired item. Use the
digit buttons to select number. Press ENTER
to con rm.

12
DISC OPERATION (COnTinUED)
PROGRAM
■ Press PROG to enter the program list.
Use / or / cursor and digit
button to enter a number.
For DVD and File disc, select the title and
chapter number.
For VCD and CD, select the track number.
■ Press to play, or move the cursor to
select "PLAY" and press ENTER to play.
■ If you want to delete the list, move the
cursor to "CLEAR" and press ENTER to
delete all the list set before.
■ Press PROG again to exit program play.
DVD AUDIO SELECT
Press AUDIO or R/L to select the audio
language to listen to, if the DVD has multiple
audio languages.
VCD AUDIO SELECT
Press R/L to select audio channel to listen.
L ➞ R ➞ Stereo
DVD SUBTITLE SELECT
Press SUBTITLE to select the subtitle
language to show, if the DVD has multiple
language subtitles.
DVD TITLE SELECT
Press TITLE to display the title or chapter
list, use / or / cursor or digit number
to select, press ENTER to play.
DVD ANGLE SELECT
Press ANGLE to select a different angle to
view, if the DVD has multiple view-angles.
ZOOM
Press the ZOOM button, the picture will be
zoomed accordingly.
X2➞ X3➞ X4➞ X1/2 ➞ X1/3 ➞ X1/4 ➞ OFF
DVD PLAYBACK MENU
Touch the center of the screen during play-
back:
Touch the icon to access desired function.
1. Subtitle select
2. Repeat playback
3. Audio select
4. Menu play
5. Select title
6. Track skip/seek
7. Play/Pause
8. Stop
9. Display audio/video setting menu
VCD PLAYBACK MENU
During playback touch the center of the
screen:
Touch the icon to access desired function.
1. Random play
2. Repeat play
3. Audio select
4. Menu play
5. Track skip/seek
6. Play/Pause
7. Stop
8. Display audio/video setting menu

DEUTSCH
DEUTSCH
ZE-NC524
13
DISC OPERATION (COnTinUED)
CD/MP3/MOVIE/PHOTO MENU
Touch the icon to access desired function.
1. Display main menu
2. Display audio/video setting menu
3. Current time
4. Folder/ le list
5. Repeat playback
6. Previous/next page
7. Random play
8. Play/Pause
9. Stop
10. Show audio  le
11. Show photo  le
12. Show video  le
13. Back to up folder
14. Show next menu
15. Current track number/total track number
16. Playback Information
17. Track skip/seek
18. Play/Pause
19. Stop
20. Show previous menu
PHOTO INTRO MENU
While intro photos, touch the center of the
screen:
Touch to access desired function.
1. Rotate the picture anticiockwise/clock-
wise.
2. Mirror the picture vertically/horizontally
3. Zoom
4. Previous/next picture
5. Play/Pause
6. Stop
7. Display audio/video setting menu

14
TUNER OPERATION
RADIO MENU
Touch to access desired function.
1. Display main menu
2. Display audio/video setting menu
3. Current time
4. Tuner information
5. Touch to tune automatically
Press more than 2 seconds to tune
manually.
6. Select Previous/next preset station
7. Show radio list
8. Tuner information
9. Preset station
10. Touch to tune automatically.
Press more than 2 seconds to tune
manually.
11. Band switch
12. Auto search and store stations
13. Show previous menu
RDS BASICS
RDS service availability varies with areas.
Please understand if RDS service is not
available in your area, the following services
are not available.
AF MODE
AF(Alternative Frequency): When the radio
Signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI
(program identi cation) as the current station
but with stronger signal strength.
Main menu ➞ Setup menu ➞ Radio ➞ AF
On/Off
AF On: AF function is activated.
AF Off: AF function is disabled.
Remark: AF indicator on TFT will  ash until
RDS information is received. If no RDS
service is available in your area, turn off the
AF mode.
TA MODE
Some RDS FM stations periodically provide
traffic information.
TP (Traffic Program Identi cation)
Broadcasting of traffic information
TA (Traffic Announcements Identi cation)
Radio announcements on traffic conditions
Main menu ➞ Setup menu ➞ Radio ➞ TA On/
Off.
When TA mode is turned on, the TA indicator
will blink.
When traffic announcement is received,
the TA indicator will display. The unit will
temporarily switch to the tuner mode
(regardless of the current mode) and begin
broadcasting the announcement at TA
volume level. After the traffic announcement
is over, it will return to the previous mode and
volume level. When TA is turned on, SEEK,
SCAN, AMS function can only be received
or saved when traffic program identi cation
(TP) code is received.

DEUTSCH
DEUTSCH
ZE-NC524
15
TUNER OPERATION (COnTinUED)
TA SEEK/TA ALARM
Main menu ➞ Setup menu ➞ Radio ➞ TA
Seek/Alarm.
If the TA (Traffic Announcements) is turned on
and there is no traffic program identi cation
code received in the speci ed time, no TA/TP
will display and either TA Alarm or TA Seek
will be activated.
TA Alarm mode: Alarm is turned on.
TA Seek mode: TA Seek is automatically
activated in non-radio mode.
TA VOL
Main menu ➞ Setup menu ➞ Radio ➞ TA
Volume
RETUNE MODE
Main menu ➞ Setup menu ➞ Radio ➞
Retune l/s
RETUNE-S or RETUNE-L is time length
selection of TA SEEK retune interval.
RETUNE-S: Short, TA SEEK retune interval is
45 seconds.
RETUNE-L: Long, TA SEEK retune interval is
180 seconds.
REMARK: RETUNE mode functions for TA
during TA SEEK mode only.
REG MODE
Main menu ➞ Setup menu ➞ Radio ➞ REG
On/Off
REG ON: AF function will implement
the regional code (of the PI) and only
stations in the current region can be tuned
automatically. REG OFF: AF function will
ignore the regional code (of the PI) and
stations in other regions can also be tuned
automatically.

16
USB/SD CARD OPERATION
USING SD-CARD
1. The SD-card slot on this device is
reserved for navigation software and
maps. All other content has to be loaded
by using the USB- interface.
2. To remove it, press the card slightly and
let it pop out. Remove it and dose the
cap.
USING USB DEVICE
1. Open the cover  ap, insert a USB device
into the USB connector.
After connecting a USB device, the unit
will read and play the  les automatically.
2. To remove the USB device, you
should  rst select another source (safe
removal).
 USB/SD-CARD NOTES:
USB functions and features concerning MP3
music play.
1. Supported  le systems FAT12, FAT16,
FAT32.
2. Up to 200 directories and 500  les can
be displayed and played back from the
USB-data carrier.
3. Descriptors of  les, directories and titles
shouldn't exceed 32 characters/bytes,
cause only the  rst 32 chars will be
displayed.
4. ID tag version 2.0 is supported. However,
the length of title, artist and album
descriptor is limited to 32 chars/bytes.
5. The device supports USB 1.1 and USB
2.0 standards at the speed of USB 1.1.
 PLEASE NOTE:
■ Due to varying speci cations of commer-
cially available USB-data carriers it
cannot be guaranteed, that each and
every USB-stick will be supported.

DEUTSCH
DEUTSCH
ZE-NC524
17
iPod OPERATION
USING THE iPod
1. Connect the optionally available iPod
cable to the "iPod" connector on the back
of the unit. If you want to use the video/
photo function of the iPod, you also need
to connect the "iPod CVBS" (3.5 mm)
part of the cable.
2. Turn on the unit, the unit should switch to
iPod mode upon connection, if not, select
the iPod from the main menu. The TFT
will show the menu below.
3. When you want to play songs, operate it
via the touch-screen of the ZE-NC524.
4. If you want to display photos or playback
some videos from the iPod, choose iPod
mode and then touch the photo or
video icon.
Both choices will lead to a screen where it
says "Please let iPod video play".
5. That means you have to pick up the iPod
now and make your choice from here.
6. You can leave this mode by touching the
middle of the screen.

18
BLUETOOTH OPERATION
 NOTE:
■ Avoid using the phone when driving.
If you still have to use it during driving, your
ZE-NC524 offers you hands-free device
functions via the built-in Bluetooth interface.
After connection, you may also control your
mobile phone through the unit.
PAIRING
Use this function to establish a connection
between the unit and your mobile phone.
Press the SRC button repeatedly on the
panel or touch BT on the Main menu to enter
Bluetooth mode.
1. Display main menu
2. Display audio/video setting menu
3. Current time
4. BT Information
5. Display LOG menu
6. Keypad
7. Dial/Receive
8. Display setup menu
9. Hang up
Turn on the Bluetooth function of your mobile
phone, keep the phone within three meters
to the unit and start to search for Bluetooth
devices. After the name of the Bluetooth
module the "ZE-NC524" appears on the
pairing list of your mobile phone, select it. At
this time, a pairing code is required. Enter
the pairing code ("1234" by default) and
the Bluetooth pairing process will continue.
Some mobile phones may instruct you to
select connect or disconnect, please select
connecting.
After pairing successfully, the Bluetooth icon
lights up. Touch and hold the button to
disconnect.
DIAL
1. Touch to open the keypad, dial
desired number.
Touch to erase previous number.
Touch to con rm and dial out.
2. Touch or press the key on the
remote control to cancel.
3. At BT main menu, touch to redial
the last number.
RECEIVE
1. After a successful pairing, when there is
a incoming call, the unit switches auto-
matically to BT mode.
2. Touch or press the key on the
remote control to receive the call.
3. Touch or press the key on the
remote control to hang up.

DEUTSCH
DEUTSCH
ZE-NC524
19
HISTORY
After successful pairing, touch to open
the LOG menu.
LO G
10. Dial
11. Page up
12. Search mode
This icon opens an on-screen keyboard.
Touch the character on-screen, touch
< button to delete a digit, touch to
begin searching.
13. Page down
14. Enter
15. Phonebook
16. Received calls
17. Dialed numbers
18. Missed calls
19. Return to BT main menu
BT MENU GENERAL OPERATION
Press the [SRC] button on the panel or the
touch key to enter the main menu, touch
[Setup] to enter the unit system setup menu,
then touch BT to enter BT setting menu.
1. PAIR ON/OFF
a. ON Allow other phones to be paired
besides the phone(s) which are already
paired with the unit.
b. OFF Only phones which have already
been paired, will  nd the unit.
2. Auto Connect On/Off
You can toggle the automatic connection
On or Off. The Bluetooth technology will
automatically establish a connection bet-
ween the unit and the registered mobile
phone when the transmission distance is
ten meters or shorter (with auto-connect on).
You will, however, loose your connection if
the distance exceeds ten meters.
3. Auto Answer On/Off
You can toggle automatic call answering
On/Off.
If Auto Answer is On and the phone is
properly paired, the unit will pick up the
incoming call automatically and you will hear
the voice of the caller via your speaker. If
Auto Answer is Off you need to accept or
reject the call manually.
BLUETOOTH OPERATION (COnTinUED)

20
A/V MODE
■ External peripheral devices with RCA audio and video outputs can be connected with
the unit.
■ For more details, please refer to <Electrical Connections Overall Diagram>.
NAV MODE
To be able to use the navigation system of your ZE-NC524, you are required to insert the
SD-card into the naviceiver  rst which is part of the set content. Do this with the ZE-NC524
in power off state. After insertion of SD card, start the unit and touch the navigation icon on
the TFT screen to start nav mode. Please refer to the included, separate “navigation manual”.
DVB-T MODE (OPTIONAL)
This player is "DVB-T ready". By purchasing and installing the module ZE-DVB2000 you
enable the DVB-T functions. Please refer to the separate manual of the ZE-DVB-2000.
GPS ANTENNA INSTALLATION GUIDE
Fix the GPS antenna for example on the dashboard, directly behind the windscreen. Make sure
there are no obstacles in the way (ex. metal coated screen forces you to install it somewhere
else). Also make sure that the signal receiving side of the GPS antenna is pointing upwards.
 NOTE:
■ The navigation is only possible if your GPS antenna has a sufficient reception.
OTHER MODES