Zest 4 Leisure Christina Bench 15307 User manual

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
V1
Assembly Instructions
Christina Bench
(W x D x H) 1.29m x 0.80m x 0.94m
PLEASE KEEP THESE INSTRUCTIONS
Pressure Treated products should not be treated with any other
products for the first month
Code: 15307

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Christina Bench Assembly Instructions
Requires 2 person assembly
Tools required: Corded / Cordless Drill, (Torx Bit Included)
Fixings Quantity
140mm Screws 6
Christina Bench Pack List
Item Description Quantity
A Back Assembly 1
B1 & B2 Side Assembly 2
C Front Bar 1
D Seat Assembly 1

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Corded / Cordless Drill, (Torx Bit Included)
1a
1c
2
1b
1d
3
1. Position Back Assembly A to Side Assembly B1 ensuring pre-drilled holes are aligned and fix through top
hole using 1no 140mm screw. (See Fig. 1a)
Similiarly position and fix Side Assembly B2 to opposite end of Back Assembly A using 1no 140mm
screw. (See Fig. 1b)
Further fix Side Assembly B2 in remaining pre-drilled hole using 1no 140mm screw. (See Fig. 1c)
Similarly fix Side Assembly B1 in remaining pre-drilled hole using 1no 140mm screw. (See Fig. 1d)
2. Position Front Bar C between Leg Assemblies and fix using 2no 140mm screws (1no per end). (See Fig.
2)
3. Place Seat Assembly D into bench assembly as shown in Fig. 3.