Zest 4 Leisure Madison Bench User manual

Assembly Instructions
(W x D x H): 1.60m x 0.345m x 0.405m
Product Name: Madison Bench
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-10.16

Madison Bench Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Madison Bench Pack List
Item Description Quantity
A LegAssembly 4
B Bracing 2
C Seat Assembly 2
Fixings
80mm screws 4
120mm screws 4
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Madison Bench is now complete.
1. Attach 1no Leg AssemblyA to the end of Bracing B using 2no 120mm screws.
Repeat procedure on opposite end of Bracing B with remaining LegAssembly A.
(See Figs. 1a & 1b)
2. Position leg assembly centrally onto SeatAssembly C using 4no 80mm screws
(2no per Leg AssemblyA)
1b
1a
2