Zest 4 Leisure Madison Picnic Table User manual

Assembly Instructions
(W x D x H) 1.60m x 1.63m x 0.76m
Product Name: Madison Picnic Table
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-10.17

Madison Picnic Table Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Hex Bit Included).
Madison Picnic Table Pack List
Item Description Quantity
A Table Top 1
B Table Leg Assembly 2
C Bracing 3
D Seat Leg & Foot Assembly 2
E Seat Top 2
Fixings
80mm Screws 16
120mm Screws 12
180mm Screws 8
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Madison Picnic Table is now complete.
1. Invert Table TopA and position 1no Table LegAssembly B centrally and inside table
top batten. Fix using 4no 80mm screws (2no per side). (See Fig. 1)
Repeat procedure for remaining Table LegAssembly B.
2. Position 1no Bracing C centrally between Table LegAssemblies B and fix using 4no
120mm screws (2no per end). (See Fig. 2)
3. Place 1no Seat & Table Foot Assembly D centrally onto Table LegAssembly B and
fix using 4no 180mm screws. (See Fig. 3)
Repeat procedure on opposite side for remaining Seat & Table Foot Assembly D.
4. Position 1no Bracing C centrally between Seat & Table Foot Assemblies D and fix
using 4no 120mm screws (2no per end). (See Fig. 4)
Repeat procedure for remaining Bracing C on opposite side.
5. Turn assembly over and position 1no Seat Top E centrally onto Seat & Table Foot
Assemblies D and fix using 4no 80mm screws (2no per side). (See Fig. 5)
Repeat procedure for remaining Seat Top E.

www.zest4leisure.co.uk
2
1
3 4
5