Zest 4 Leisure Emily 15217 User manual

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
V1
Assembly Instructions
Emily Bench 6ft
(W x D x H) 1.92m x 0.65m x 0.935m
PLEASE KEEP THESE INSTRUCTIONS
Pressure Treated products should not be treated with any other
products for the first month
Code: 15217

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Emily Bench 6ft Assembly Instructions
Requires 2 person assembly
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Hex Bit Included)
Fixings Quantity
105mm Bolt 8
10mm Nut 4
Washer 4
160mm Screws 4
Cross Dowel 4
Emily Bench 6ft Pack List
Item Description Quantity
A Seat Assembly 1
B Side Assembly 2
C Back Assembly 1

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Hex Bit Included)
1. Locate Seat Assembly A into 1no Side Assembly B ensuring bolt-holes are aligned and insert 2no
105mm bolts. Locate washers and thread nuts onto bolts, but do not fully tighten at this stage. (See
Figs. 1a & 1b).
Repeat procedure on opposite side using remaining Side Assembly B.
Further secure Side Assemblies B to Seat Assembly A using 4no 160mm screws (2no screws per side,
1no screw per leg). (See Fig. 1c)
2. Insert and align 4no Cross Dowels into pre-drilled holes to rear of Back Assembly C as shown in Fig. 2a
ensuring slots in Cross Dowels face outwards.
Position Back Assembly C between Side Assemblies B ensuring dowel holes are rearmost and insert
4no Bolts into Cross Dowels through pre-drilled holes (1no per Cross Dowel). (See Figs. 2b & 2c.)
3. Finally, ensure ALL fixings are fully tightened.
1a
1c
2b
1b
2a
2c