Zest 4 Leisure Lisa Table User manual

Assembly Instructions
(W x D x H) 0.779m x 0.779m x 0.712m
Product Name: Lisa Table
(Part of Set)
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Lisa Table Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: 4mm Hex Key, Corded / Cordless Drill, Pozi-drive Bit / Screwdriver,
3mm Drill Bit.
Lisa Table Pack List
Item Description Quantity
A Table Top 1
B Leg 4
C Cross Bracing 1
Diagonal Bracing 4
Fixings
Hex Bolt 8
‘T’ Nut 8
50mm Screws 12
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: 4mm Hex Key, Corded/Cordless Drill, Pozi-drive Bit/Screwdriver,
3mm Drill Bit.
Lisa Table is now complete.
1. Position Leg B (Fig.1a) and attach to Table Top A using 2no Hex Bolts and ‘T’ Nuts.
Ensure correct orientation of Hex Bolts and ‘T’ Nuts (Figs.1a & 1b).
Repeat procedure for remaining Legs B.
2. Position Diagonal Bracing C 125mm (nom.) from base of Legs B (Fig.2a) and attach
using 4no 50mm Screws.
Ensure all Bolts are fully tightened.
3. Invert table assembly and place on flat surface. Position Diagonal Bracing to Table
TopA and inner edge of Leg B. Fix using 2no 50mm screws as shown in Fig.3.
4. Repeat procedure for the remaining 3 Legs and Diagonal Bracings.

www.zest4leisure.co.uk
1b1a
2a 2b
3