Zest 4 Leisure Harriet Park Bench User manual

Assembly Instructions
(W x D x H): 0.80m x 1.20m x 0.70m
Product Name: Harriet Park Bench
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-10.16

Harriet Park Bench Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Harriet Park Bench Pack List
Item Description Quantity
A LegAssembly 2
B Bracing 1
C Seat Slat Assembly 1
Fixings
90mm screws 2
40mm screws 24
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Harriet Park Bench is now complete.
1. Attach 1no Leg AssemblyA to the end of Bracing B using 1no 90mm screw.
Repeat Procedure on opposite end with remaining Leg Assembly A. (See Fig. 1)
2. Position Seat Slat Assembly C centrally onto seat assembly (See Fig. 2a) (if
necessary equally space slats) and fix using 24no 40mm screws (2no per slat,
1no per side). (See Figs. 2b & 2c)
3. Remove backing strip from Seat Slat Assembly C. (See Fig. 3)

www.zest4leisure.co.uk
2a
1
2b 2c
3