Zest 4 Leisure Horizon Arch User manual

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
V5
Assembly Instructions
Horizon Arch
(W x D x H) 1.80m x 1.30m x 2.00m
PLEASE KEEP THESE INSTRUCTIONS
Code: 00042
is product is made from pressure-treated timber. It should not be painted
or coated with any other treatment until at least 6 months after purhcase

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Horizon Arch Assembly Instructions
Requires 2 person assembly
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, Tape Measure,
3mm Drill Bit will be required to drill screw holes during construction.
Fixings Quantity
70mm Screws 26
60mm Screws 12
Large Horizon Arch Pack List
Item Description Quantity
A Rail 2
B Rafter 5
C Post 4
D Trellis Panel 2
E Bracing 4

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure, Mallet,
3mm Drill Bit required in order for you to drill all screw holes before construction.
1. Position Rafters B 150mm from edge at both ends of Rails A and fix using 4no 70mm Screws -
2 per Rafter (Fig.1a). Space out remaining Rafters B evenly (Fig.1b) and attach using 6no 70mm Screws.
2. Locate Post C onto Rail A as shown in Fig.2a (adjust width to suit). Fix in position using 2no
70mm Screws.
3. Place Trellis Panel D 90mm from top of Post C and fix in position using 3no 60mm Screws
(Figs.3a,3b & 3c).
4. Position second Post C as shown in Fig.4 and fix to Rail A using 2no 70mm Screws.
Fix Trellis Panel D to second Post C using 3no 60mm Screws.
Repeat stages 2 - 4 for remaining Posts & Trellis Panel on opposite side of arch.
5. Ensuring Post C is perpendicular to Rail A, position Bracing E as shown in Fig.5 and fix using
2no 70mm Screws.
Repeat procedure for remaining bracings.

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
4
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure, Mallet,
3mm Drill Bit required in order for you to drill all screw holes before construction.
1a
2a
3b
1b
3a
3c
5
300mm
180mm