Zest 4 Leisure Lisa User manual

Assembly Instructions
(W x D x H) 0.57m x 0.57m x .0.87m
Product Name: Lisa Chair
(Part of Set)
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Lisa Chair Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: 4mm Hex Key, Corded / Cordless Drill & Pozi-drive Bit / Screwdriver,
3mm Drill Bit
Lisa Chair Pack List
Item Description Quantity
A SeatAssembly 1
B BackAssembly 1
C RH ArmrestAssembly 1
D LH ArmrestAssembly 1
Diagonal Bracings 4
Fixings
Hex Bolts 8
‘T’ Nuts 8
50mm Screws 8
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. Tools required: 4mm Hex Key, Corded / Cordless
Drill & Pozi-drive Bit / Screwdriver, 3mm Drill Bit
1. Position SeatAssembly A and Back Assembly B as shown in Fig.1a ensuring that
bolt holes are correctly aligned and attach using 2no Hex Bolts and ‘T’ Nuts.
Ensure correct orientation of Hex Bolt and ‘T’ Nut (Figs.1c & 1d).
Do not fully tighten at this stage.
2. Place RHArmrest C onto Back/Seat Assembly (Fig.2a), ensure all bolt holes are
aligned and attach using 3no Hex Bolts and ‘T’ Nuts (Figs.2b, 2c & 2d).
Repeat procedure for LH Armrest D.
Fully tighten all bolts at this stage.
Invert chair assembly and place on flat surface. Position 2no Diagonal Bracings
to seat and right handArmrest Assembly C and attach using 4no 50mm screws (2
per bracing) as shown in Fig.3a
Repeat procedure for remaining 2no Diagonal Bracings on left hand side of chair
(Fig.3b)
1b1a
www.zest4leisure.co.uk

2a 2b
2c 2d
1c 1d
3a 3b
Lisa Chair is now complete.