Zest 4 Leisure Rabbit Hutch 1.8m User manual

Assembly Instructions
(W x D x H): 1.905m x 0.635m x 1.065/0.975m
Product Name: Rabbit Hutch 1.8m
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-03.16

Rabit Hutch 1.8m Assembly Instructions
Requires 2 person assembly.
Tools required: Corded/Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction, hammer.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Rabbit Hutch 1.8m Pack List
Item Description Quantity
A Back Panel 1
B Side panel (Handed) 2
C Front panel 1
D Small Floor Panel 1
E Large Floor Panel 1
F Brace 8
G Internal Panel 1
H Roof Panel 1
J Felt 2
K Back/Front Fascia 2
L Side Fascia 2
Rabbit Run –Optional Extra
M Rabbit Run Back Panel 1
N Rabbit Run Side Panel 2
O Rabbit Run Front Panel 1
www.zest4leisure.co.uk
Fixings
30mm Screws 14
40mm Screws 34
50mm Screws 37 + 28 (for Rabbit Run)
Felt Nails 50

Rabit Hutch 1.8m Assembly Instructions
Requires 2 person assembly.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
www.zest4leisure.co.uk

Rabbit Hutch 1.8m is now complete.
1. Fix Back PanelA to Side Panels B using 6no 50mm Screws, 3no per side (Figs.1a & 1b)
2. Fix Front Panel C to Side Panels B using 6no 50mm Screws, 3no per side (Figs.2a &
2b)
3. Attach Small Floor Panel D to Back PanelA, Front Panel C and Side Panel B using 8no
30mm Screws - 3no into each of the Back and Front PanelA and C and 2no into Side
Panel B (Fig.3a).
Attach Large Floor Panel E to Back PanelA and Front Panel C using 6no 30mm Screws
–2no into Back PanelA and 4no into Front Panel C (Fig.3b).
With the assembly laid on its back and the entry ramp fully opened, further attach Large
Floor Panel E to Side Panel B using 3no 50mm Screws as shown in Fig.3c.
4. Fix 8no Braces F as shown in Fig.4 using 16no 50mm Screws –2no per Brace F.
5. Attach Internal Panel G to battens of Back PanelA and Front Panel C as shown in
Fig.5a using 6no 50mm Screws –3no into each panel.
Further attach Internal Panel G to Floor Panel E using 2no 40mm Screws (Fig.5b).
6. Position Roof Panel H centrally over assembly and attach using 12no 40mm Screws –
4no into each of the Back and Front PanelA and C and 2no into each Side Panel B.
7. Lay down 2 pieces of Felt J (Fig.7a) and fold so they interlock as shown in Fig.7b. Apply
tape to the lower piece of felt, remove the top strip and firmly press down the fold as
shown in Fig.7c.
Fix Felt J to the Roof Panel H using 50no equally spaced Felt Nails –6no through the
middle fold and 44no around the sides as shown in Fig.7d.
8. Attach Front and Back Fascias K to Roof Panel H using 14no 40mm Screws –7no per
Fascia K (Fig.8)
Attach Side Fascias L to Roof Panel H using 6no 40mm Screws –3no per Fascia L
(Fig.8)
Rabbit Run –Optional Extra
9. With the assembly up side down Place Rabbit Run Back Panel M between legs of Side
Panels B and fix in position using 8no 50mm Screws –2no into each leg and 4no into
Back Panel A (Figs.9a & 9b).
10. Place Rabbit Run Side Panels N between legs of Side Panels B and fix in position using
12no 50mm Screws –2no per Side Panel B (Fig.10a) and 2no per leg of Side Panel B
(Fig.10b).
11. Place Rabbit Run Front Panel O between legs of Side Panels B and fix in position using
8no 50mm Screws –2no into each leg and 4no into Front Panel C (Figs.11a & 11b).

www.zest4leisure.co.uk
1b1a
2a 2b
3a 3b
3c 4

www.zest4leisure.co.uk
5b5a
67a
7b 7c
7d 8

www.zest4leisure.co.uk
9b9a
10a 10b
11a 11b
Rabbit Run –Optional Extra