Zest 4 Leisure Venus Arch User manual

Assembly Instructions
(W x D x H): 1.80m x 1.06m x 2.13m
Product Name: Venus Arch
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V4-02.17

Venus Arch Assembly Instructions
Requires 2 person assembly.
Please take a few moments to check all pack contents listed.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Venus Arch Pack List
Item Description Quantity
A Rafter 5
B Rail 2
C Trellis Panel 2
D Post 4
E Brace 4
Fixings
60mm Screws 12
80mm Screws 26
www.zest4leisure.co.uk

www.zest4leisure.co.uk
1b1a
1c 2
3
70mm
4
1. Position 4no Rafters A at both ends of Rails B and fix using 8no 80mm Screws - 2
per RafterA (Fig.1a & 1b). Position remaining RafterA centrally (Fig.1c) and attach
using 2no 80mm Screws.
2. Position 1no Trellis Panel C between 2no Posts D ensuring trellis is 300mm from
top of post and notches are outer facing. Fix using 6no 60mm screws - 3no per
post (Fig. 2). Repeat procedure with remaining Trellis Panel C and Posts D.
3. Locate RaftersA onto Post/TrellisAssemblies and fix in position using 8no 80mm
Screws –2no per post (Fig.3).
4. Attach Braces D as shown in Fig.4 using 8no 80mm Screws –2no per Brace D.
Venus Arch is now complete.