Zest 4 Leisure Sunset Arch User manual

Assembly Instructions
(W x D x H) 1.60m x 0.80m x 2.10m
Product Name: Sunset Arch
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Sunset Arch Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit, Tape
Measure.
Sunset Arch Pack List
Item Description Quantity
A Rail 2
B Rafter 5
C Post/TrellisAssembly 2
D Bracing 4
Fixings
60mm Screws 14
50mm Screws 8
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Tape Measure.
Sunset Arch is now complete.
1. Position Rafters B at both ends of RailsA and fix using 4no 60mm Screws –2no
per Rafter (Fig.1a). Space out remaining Rafters B equally (Fig.1b) and attach
using 6no 60mm Screws.
2. Locate Post/Trellis Assembly C onto Rails A as shown in Fig.2a (adjust width to
suit). Fix in position using 2no 60mm Screws –1no per side (Fig.2b).
Repeat procedure for remaining Post/TrellisAssembly.
3. Ensuring Post/TrellisAssembly C is perpendicular to RailsA, position Bracings D
as shown in Figs.3a & 3b and fix using 4no 50mm Screws –2no per bracing.
Repeat procedure for remaining bracings.

www.zest4leisure.co.uk
1b1a
2a 2b
3a 3b