Zest 4 Leisure Abbey 2 Seater Bench User manual

Assembly Instructions
(W x D x H) 1.18m x 0.73m x 0.73m
Product Name: Abbey 2 Seater Bench
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Abbey 2 Seater Bench Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit, Tape
Measure.
Abbey 2 Seater Bench Pack List
Item Description Quantity
A Armrest 2
B1,B2 Leg Assembly 2
C SeatAssembly 1
D BackAssembly 1
E Fascia 1
Fixings
80mm Screws 10
70mm Screws 8
40mm Screws 3
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Tape Measure.
Abbey 2 Seater Bench is now complete.
1. Position Leg Assembly B1 ontoArmrest A, ensure correct orientation of
components and attach using 2no 70mm Screws (Fig.1). Repeat procedure for
remaining Leg Assembly and Armrest.
2. Place Seat Assembly C onto LegAssembly B1 and attach using 2no 80mm
Screws (Fig.2a). Insert 2no further 80mm Screws as shown in Fig 2b. Repeat
procedure to attach Leg Assembly B2.
3. With part-assembled seat in upright position attach Back Assembly D to Seat
Assembly C using 4no 70mm Screws (Fig.3a).
Attach Back Assembly D to Armrests A using 2no 80mm Screws –1no per
Armrest (Fig.3b)
4. Position Fascia E as Shown in Fig. 4 and attach using 3no 40mm Screws.

www.zest4leisure.co.uk
2a1
2b 3a
3b 4