Zest 4 Leisure Lily Relax 00451 User manual

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
V5
Assembly Instructions
Lily Relax Double Seat
(W x D x H) 1.75m x 0.92m x 0.92m
PLEASE KEEP THESE INSTRUCTIONS
Code: 00451
is product is made from pressure-treated timber. It should not be painted
or coated with any other treatment until at least 6 months after purhcase

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Lily Double Relax Seat Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 4mm Hex( Allen) Key,
Mallet required in order for you to drill all screw holes before construction.
Fixings Quantity
50mm Screws 18
Hex Bolts 12
‘T’ Nuts 12
Hex Screws 4
Lily Double Relax Seat Pack List
Item Description Quantity
A Back Support Assembly 1
B Seat Assembly 1
C Back Assembly 1
D1/D2 Armrest/Leg Assembly 2
ELeg 2
F Upper Shelf Assembly 1
G Lower Shelf Assembly 1

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 4mm Hex( Allen) Key,
Mallet required in order for you to drill all screw holes before construction.
1. Insert Back Assembly A between rear legs of Seat Assembly B, align bolt holes and insert 2no Hex Bolts
and ‘T’ Nuts. See Figs. 1a, 1b & 1c.
Do not fully tighten at this stage.
2. Locate Back Assembly C as shown in Fig 2a and fix in position using 6no Screws. See Figs 2b & 2c.
3. Position Armrest/Leg Assembly D1 as shown in Fig.3a. Align bolt holes and insert 2no Hex Bolts and ‘T’
Nuts. See Fig. 3b. Do not fully tighten.
Attach Armrest/Leg Assembly D1 to Back Support Assembly A using 1no Screw. See Fig.3c.
Repeat stages 1-3 for remaining seat using Armrest/Leg Assembly D2.
4. Position Leg E as shown in Fig.4a and attach to Upper Shelf Assembly F using 1no. Screw. Fix remaining
Leg E in corresponding position on Upper Shelf Assembly.
Ensuring correct orientation of Lower Shelf Assembly G, attach to both Legs E using
2no. Hex Screws. See Fig.4b.
5. Place shelf assembly between seat assemblies (D1 & D2 outermost) Fig.5a, locate screw/bolt holes and
attach using 4no. Hex Bolts & ‘T’ Nuts to front (Fig.5b) and 2no Hex Screws to rear (Fig.5c).
Attach rear of Upper Shelf Assembly F to Back Support Assemblies A using 2no Screws
as shown in Fig.5d.
Fully tighten all bolts at this stage.
Lily Double Relax Seat is now complete.

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tool required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Hex Bit Included)
1a
1c
2b
3a
1b
2a
2c
3b

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
4b
5b
5d
5a
5c
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tool required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Hex Bit Included)
3c 4a