Zest 4 Leisure Emily Bench 4ft User manual

Assembly Instructions
(W x D x H) 1.235m x 0.67m x 0.96m
Item Code: Emily Bench 4ft
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Emily Bench 4ft Assembly Instructions
Emily Bench 4ft Pack List
Item Description Quantity
A SeatAssembly 1
B Side Assembly 2
C BackAssembly 1
Fixings
105mm Bolt 8
10mm Nuts 4
Washers 4
Cross Dowel 4
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] Option 1 or email:
[e-mail]
Assembly requires 2 persons.
Tools required: 10mm Spanner, Slotted (Flat-head) Screwdriver, 4mm Hex (Allen)
Key.
Emily Bench 4ft is now complete.
1. Locate SeatAssembly (A) into SideAssemblies (B) ensuring bolt-holes are
aligned and insert 2no bolts per side (See Figs 1a & 1b). Locate washers and carefully
thread nuts on to bolts, but do not tighten fully at this stage.
2. Insert 4no Cross Dowels into 10 mm holes to rear of Back Assembly (C) ensuring
slots face outwards (as shown in Fig 2a, which allows for aligning dowels with bolts
using a slot head screwdriver). Position the Back Assembly between side assemblies
(Fig 2b) and insert 2no bolts per side and carefully thread bolts into cross dowels,
(Figs 2c & 2d)
3. Finally, ensureALL nuts and bolts are fully tightened.

www.zest4leisure.co.uk
1b1a
2a 2b
2c 2d