Zest 4 Leisure Lincoln User manual

Assembly Instructions
(W x D x H): 1.56m x 0.67m x 1.99m
Product Name: Lincoln Arbour
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-04.16

Lincoln Arbour Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Lincoln Arbour Pack List
Item Description Quantity
A Side Panels (Left & Right) 2
B Full Back Panel 1
C Trellis Back Panel 2
D Floor Panel 1
E Front Panel 1
F Hinged Seat 1
G Back Rest 1
H Fascia Board 4
J Roof Panel 2
K Ridge Capping 1
L Finial 2
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Lincoln Arbour is now complete.
Fixings
40mm Screws 26
60mm Screws 28
1. Attach Side PanelsA to Full Back Panel B using 4no 60mm Screws –2no per
Side PanelA –ensuring Full Back Panel B is flush with battens of Side PanelsA.
Figs.1a & 1b.
2. Position Trellis Back Panels C between Side PanelsA and attach using 8no
60mm Screws –4no per Trellis Back Panel C. Figs.2a & 2b.
3. Locate Floor Panel D on to the floor support battens (Figs.3) and fix to the floor
battens using 4no 40mm Screws –2no per side.
4. Place Front Panel (E) between the Side Panels A (Fig.4) and fix in position using
4no 60mm Screws –2no per side.
5. Position the Hinged Seat F on to the seat support battens and fix to the seat
support battens using 4no 60mm Screws –2no per side of rear section of the
Hinged Seat F (Fig.5).
6. Position Back Rest G between the Side PanelsA and attach to the Hinged Seat F
using 2no 60mm Screws –1no per side and to the Trellis Back Panels C using
2no 60mm Screws –1no per side (Fig.6).
7. Attach Fascia Boards H to Roof Panels J using 12no 40mm Screws –3no per
Fascia Board H (Fig.7a).
Attach Ridge Capping L to the top of Roof Panels K using 6no 40mm Screws –
3no per panel (Fig.7b & 7c).
8. Place roof assembly on to Side PanelsA and fix to Side PanelsA using 4no
60mm Screws –1no per side.
9. Position and attach centrally, 2no Pointed Finials L to the Fascia Boards H (front
and back) using 4no 40mm screws –2no per finial (Fig.9).

www.zest4leisure.co.uk
1b1a
2a 2b
3 4
5 6

www.zest4leisure.co.uk
7b7a
7c 8
9