Zibro S1629 User manual

2
20
38
56
74
BRUGSANVISNING
OPERATING MANUAL
GEBRUIKSAANWIJZING
INSTRUKCJA OBSŁUGI
KULLANIM KILAVUZU
6
4
1
:
S1629 - S1635
TR

4
20
1. READ THE DIRECTIONS FOR USE FIRST.
2. IN CASE OF ANY DOUBT, CONTACT YOUR DEALER.
Dear Sir, Madam,
Congratulations on the purchase of your airconditioner. You have acquired a high quality
product that, if used responsibly, will give you many years of pleasure. Please read these
instructions for use first in order to ensure the maximum life span of your airconditioner.
On behalf of the manufacturer, we provide a 24-month guarantee on all material and
production defects. Please enjoy your airconditioner.
Yours sincerely,
PVG International b.v.
Customer service department

4
21
CONTENTS
A Safety instructions 22
B Parts and functions 23
C Before operation 25
D Instructions for use 26
E Air filter 33
F Cleaning 33
G Trouble shooting 35
H Guarantee conditions 36
I Technical data 37

ASAFETY INSTRUCTIONS
Install the device only when it complies with local regulations, by-laws and standards. The unit is only sui-
table for use in dry locations, indoors. Check the mains voltage and frequency. This unit is only suitable for
earthed sockets, connection voltage 220 - 240 V. / 50 Hz.
Before connecting the unit, check the following:
• The voltage supply must correspond with the mains voltage stated on the rating label.
• The socket and power supply must be suitable for the current stated on the rating label.
• The plug on the cable of the device must fit into the wall socket.
• The device must be placed and mounted on a stable surface.
The electricity supply to the device must be checked by a recognised professional if you have any doubts
regarding the compatibility.
• This device is manufactured according to CE safety standards. Nevertheless, you must take care, as with
any other electrical device.
• Do not cover the air inlet and outlet grill.
• Never allow the device to come into contact with chemicals.
• Never spray the unit with or submerge in water
• Do not insert objects into the openings of the unit.
• Never use an extension cable to connect the device to the electric power supply. If there is no suitable,
earthed wall socket available, have one installed by a recognised electrician.
• For safety reasons take care when children are in the surrounding of the device, as with any other elec-
trical device.
• Have any repairs only carried out by a recognised service engineer or your supplier. Follow the instruc-
tions for use and maintenance as indicated in the user manual of this device.
• Always remove the plug of the unit from the wall socket when it is not in use.
• A damaged power cord or plug must always be replaced by a recognised electrician or your supplier.
G
ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
G
IMPORTANT
The device MUST always have an earthed connection. If the power supply is not earthed, you may
not connect the unit. The plug must always be easily accessible when the unit is connected. Read
these instructions carefully and follow the instructions.
4
22

4
23
BPARTS AND FUNCTIONS
Outdoor unit
Indoor unit
Operating panel
1. EMERGENCY OPERATION (manual) SWITCH. To operate the unit if the remote control is not operatio-
nal.
2. POWER INDICATOR. Lights up when this function is activated.
3. TIMER. Time indicator lights up during preset time.
4. OPERATE. Operating indicator lights up when the unit is in operation.
Auto revovery function
lf there is any power failure during operation, operation status before power failure is memorized. 3~4
minutes after power recovery, the unit restarts automatically with previous operation status memorized
(3~4 minutes is protective time for compressor).
OUTDOOR UNIT
Active carbon filter
Inlet grill
Screen filter
Enzyme filter
Vertical louver
Horizontal louver
Remote signal
receiver ***
Outlet **
** The air flow direction can be
adjusted with the vertical and
horizontal louvers.
*** Beeping sound assures successfull
signal transmission between wire-
less remote and the indoor unit.
Pipe and connecting cable
Air inlet
Drain hose
Earthing terminal
Air outlet * *Warm air comes out when cooling,
cool air comes out when heating.

Remote Control
G
NOTE
• 00:00 A.M. – 12:00 A.M. = 00:00 – 12:00
• 00:00 P.M. – 12:00 P.M. = 12:00 – 24:00
G
ATTENTION!
•Because of Auto Recovery Function, if shutting off the power supply during operation, the unit
may restart irrespective your intention when turning on the power supply again.
• If the unit is not to be used for a long time, shut off the power supply after terminating all
operation with remote controller.
4
24
Sends signals to the receiver of the indoor
unit.
Indicates the fan speed selected by the fan
speed button. When set at “AUTO”, the fan
speed changes automatically according to
the difference between the designated
temperature and the room temperature.
Indicates the current operating mode
Indicates the present time or the timer.
ON:The air conditioner starts operation at
the designated time.
OFF:The air conditioner stops operation at
the designated time.
Indicates the temperature set by the tem-
perature setting buttons.
Lights up when a signal is sent.
The setting temperature increases
by 1°C (1.8°F) per press.
The setting temperature decreases
by 1°C (1.8°F) per press.
Holding a button changes the temperature
setting quickly.
Air flow direction can be changed horizon-
tally (upward and downward) by each press.
1TRANSMITTER
2FAN SPEED
3OPERATION MODE
4TIME DISPLAY
5TIMER MODE
6TEMPERATURE
7TRANSMITTING
8TEMPERATURE
9LOUVER BUTTON
Generates negative ions. For the inverter
models only, the power indicator lights up
red.
Use to adjust the fan speed. The indication
of the fa speed varies among “L” (Low),
“M” (Medium), “H” (High), and “AUTO”
each time the button is pressed.
Use to change the operating mode. The
indication of the operating mode varies
among (Automatic), (Cooling),
(Dry), (Circulating) and
(Heating) each time the button is
pressed.*
Press the “TIME ADJ” button to adjust the
present time or the timer.
Press these buttons to adjust the present
time or the timer.
Forward time
Backward time
Holding a button changes the time setting
in 10-minute intervals.
Press these buttons to turn the timer ON or
OFF.
Press this button for the Sleep setting.
Starts operation with a press: stops opera-
tion with the next press.
jIONIZER BUTTON
kFAN SPEED BUTTON
lOPERATION MODE
BUTTON
mTIME ADJ BUTTON
n, BUTTONS
oTIMER FIXING
pSLEEP BUTTON
qON/OFF BUTTON

4
25
CBEFORE OPERATION
1. Inserting batteries in remote control
Placing the batteries
Remove the battery cover in the direction of the arrow.
Place the new batteries as indicated (ensure that the positive (+) and negative
poles (-) are in the correct positions. Slide the battery cover back into place.
Storage of the remote control and tips for use
The remote control can be placed in the wall-mounted holder. De wall-mounted holder is delivered toge-
ther with the unit.
Using the remote control
Point the remote control at the receiver on the indoor unit of the air conditioner. The air conditioner can
be operated in this manner up to a distance of approximately 7 meters.
2. Attaching filters
This air conditioner is equipped with a 3 layer filter package to clean the circulated room air:
• Screen filter: captures large dust particles.
• Enzyme filter: neutralizes airborne micro organisms.
• Active carbon filter: removes unpleasant odours from the air.
a. Open the front panel by pulling upward
b. Remove the screen filters carefully. Push up the center tab of each screen filter
slightly until it is released from the stopper, and remove the filters.
c. Attach active carbon and enzyme filter in the filterholder on each side of the
air conditioner.
d. Attach the screen filters behind the stopper so that the “FRONT” indication is
showing outward. Make sure that the filters are completely behind the stop-
pers. If the filters are not attached correctly, it may cause defects.
e. Close the front panel by pushing downward.
Air filters
Screen
filters
Enzyme
filter
Active carbon filter
G
NOTE
Use 2 AAA (1.5 Volt) batteries. Do not use rechargeable batteries. Replace the batteries with new
batteries of the same type (see above) when the display starts to fade.

DINSTRUCTIONS FOR USE
Present time setting
Example: Set to 3:50 p.m.
1. Press the “TIME ADJ” button once
2. Adjust the time with “+”, “-“ buttons. Holding a button changes time set-
ting in 10-minute intervals.
3. Press the “TIME ADJ” button 3 times. The present time appears on the dis-
play. The setting is complete.
Circulation operation
When you use other heating equipment, heated air accumulates in the upper
space of the room. Using the operation “Circulation” will equalize the differences
between the upper and lower spaces of the room and improves the efficiency of
your heating equipment..
1. Press the ON/OFF button
2. Set the operation mode, circulating , by pressing the operation mode but-
ton.
3. Adjust the setting temperature by pressing the temperature setting buttons.
Circulating Operation begins after the room temperature reaches the tem-
perature set by the remote controller.
4. Adjust the fan speed by pressing the fan speed button. When the MODE is
set at “AUTO”, the fan speed changes automatically.
G
WARNING!
• Do not place heating equipment right under the indoor unit and the remote controller.
• Adjust air flow direction to avoid the direct airflow hitting to the heating equipment.
• Provide adequate ventilation
G
NOTE
Even if the actual time is not programmed, you can use all operations
except “Timer operation”
4
26

4
27
Cooling/dry operation
1. Press the ON/OFF button
2. Set the operation mode to Cooling , Heating or Dry , by pressing the
operation mode button
3. Adjust the setting temperature by pressing the temperature setting buttons.
4. Adjust the fan speed by pressing the fan speed button. When the mode is set
at“AUTO” the fan speed changes automatically.
Automatic operation
In automatic operation the air conditioner selects the operation mode (cooling, dry, heating) according to
the room temperature when it starts.
• The air conditioner will restart in the previous mode if automatic operation is resumed within 3 hours
from the switch-off.
• Mode review. The computer checks and compares the room temperature regularly after the compres-
sor shuts off, and will adapt the operating mode.
G
NOTE!
• If the unit operates in cooling or dry for a long time in high humidity (i.e., windows and doors
are opened), dew and water drops may form on the indoor unit. Be aware that falling drops of
water can damage your floor (e.g. carpet or parquet).
• If you set a low temperature for dry operation, you may feel the air flow is cold.
• During dry mode operation, the system performs the cooling operation until the room
temperature reaches 1~2°C above the setting temperature. Then it continues dry mode
operation intermittently with fan speed at “LO”, regardless of the designated speed.
• During dry operation, the indoor unit stops operating for 3 minutes when the room
temperature reaches the setting temperature.
• During the heating operation, the outdoor unit may frost and heating capacity may be
reduced. In this case, the unit stops its heating operation and conducts defrosting operation
automatically. During the defrosting operation, the fans of the indoor and outdoor units stop.
• Unless the heat exchanger gets warm enough, the air will not flow out to prevent cold air.

1. Press the ON/OFF button
2. Set the operation mode to Automatic “AUTO“, by pressing the operation
mode button
3. Adjust the setting temperature by pressing the temperature setting buttons.
4. Adjust the fan speed by pressing the fan speed button. When the mode is set
at “AUTO” the fan speed changes automatically.
Negative ion operation
This function is available only when the air conditioner is operating.
1. Press the ON/OFF button
2. Press the ionizer button
To stop negative ion operation, press the ionizer button.
G
NOTE
If the selected mode by Automatic operation does not suit you, set the operation mode (cooling,
dry, heating) with the operation mode button.
4
28