Zibro Laser 56 User manual

LASER 56
Heaters
Laser Fixed
Zibro
Laser 56
FF-56-ZK
Grey
8713508720524
Burner type
Net. capacity kW 2.4 - 6.4
Efficiency %93
m238-108
m395-270
ltr/hr 0.230 - 0.630
g/hr 184 - 504
Tank capacity ltr 7.6
Burning time tank hr 12 - 33
Mains V/Hz/Ph 230 / 50 / 1
Power consumption preheat W 275
Power consumption burning W 35 - 60
Noise level (low-high) dB(A) 24 - 41
Dimensions (w x d x h) * mm 620 x 406 x 680
Weight kg 27
Guarantee ** years 2
*including base plate
Manual fuel pump
Concentric pipe system
Instructions for use
Description Model EAN Code
Burner mat B 8713508121505
Removable fuel tank 8713508401706
Manual fuel pump 8713508400105
Burner mat adhesive 8713508403403
Most important spare parts
** except burner mat and manual fuel pump
Technical specifications
Product data sheet 2006
Product range
Product line
Brand name
Model name
Toyotomi model name
Colour
EAN code
Suitable space
Fuel consumption
634>1
Electronic Injection Burning System (BI)
Accessories
20 ft = 117
40 ft = 252
HQ = -
WxDxH=
620 x 406 x 680 mm
Gross =
34.5 kg
HEATER

LASER 56 HEATER
Features
Semi-automatic operation: This heater is equipped with a 24-hour
programmable timer and integrated thermostatic control to maintain the
desired room temperature. Also a 'day' and 'night temperature' can be set.
Fuzzy logic: This heater is equipped with a self-regulating temperature
control system. The heating mode can be set according to the
requirements. Computer controlled temperature regulation.
Wickless design: Provides clean and economical heating without wick
maintenance or replacement.
Information display: Helps to keep track of all the important heater
functions.
Safety devices: This heater is equipped with two flame-rod sensors, an
over-heat protector, a tip-over switch and a burner thermistor for safe
heating.
Automatic airflow control: The speed of the built-in fan is self-
regulatory, depending on the burning mode of the heater.
Made in Japan: This heater has been produced according to the ISO
9000:2000 Quality Control Standard.
Design: The heater is part of an exclusive range of Zibro products.
Full colour box: The heater is delivered in a stylish full colour box showing
application and operation information in 10 languages.
Concentric pipe system: The air inlet pipe is placed around the air
discharge pipe in order to increase efficiency and safety (combustion air is
pre-heated and the piping system has a cold outer surface). This whole
system is made from stainless steel.
Heat exchanger: The heater is equipped with a stainless steel heat
exchanger to ensure a long lifetime.
Comfortable heating: Because the burnerpot is connected to the outdoor
air by means of the concentric pipe system, a closed loop is created. When
using this heat no additional ventilation is required, which increases comfort
and effectivity.
Remarks
External fuel tank: The heater can be connected to an external fuel tank.
This can be done in such a way that the internal fuel tank stays operational
also.
Laser burner
Concentric pipe system
Connection to fixed
fuel tank
Roomtemperature sensor
Comfortable heating