Zimmer emFieldPro User manual

User Manual
emFieldPro
USA

Basic features of the device
User Manual Rev.3
The emFieldPro is a non-invasive therapeutic device. The device produces a
magnetic field that interacts with the tissues of the human body. By muscle
stimulation, the emFieldPro helps to strengthen tone and firm the abdomen, buttocks
and thighs.

Illustrations
Front of the device
User Manual Rev.3
Fig. 1 Front of the device
1 Applicator (large)
2 Applicator holder
3 Applicator arm
4 Applicator (small)
5 Display
6 Central control knob
7 Control unit
8 Swiveling wheels
1
2
3
4
5
7
8
6

Illustrations
Rear of the Device
User Manual Rev.3
Fig. 2 Rear of the device
9 Outlet for applicator tube
10 Ventilation grid
11 Power connector
12
Power switch
13 Serial no / Identification plate
9
10
11
12
13

Illustrations
Screens and Displays
User Manual Rev.3
Fig. 3 Screens and displays
14 Time remaining
15 Total operation time
16 Configuration icon
17 Intensity in %
18 Start/Stop
19 Channel selector (CH1 or CH2)
20 Mode selector (Programs / Favourites)
21 Program information screen
14
15 16
18
17
20
21
19

Illustrations
Accessories
User Manual Rev.3
22 Mains cable
23 Hex ke
y

Explanation of Symbols
User Manual Rev.3
In the instructions for use this symbol indicates “Generic Caution” with regard to
indicate a hazardous situation.
Caution !
In the instructions for use this symbol indicates "Caution" with regard to possible
damage of the device.
This symbol indicates in the instructions for use for dangers to patient, user or third.
Applied part BF
Consult Instructions for Use
Please refer to the notes
Follow instructions for use
No access for persons with pacemakers
No pushing
No sitting
Warning, magnetic field
Protective earth (ground)
Keep packaging dry

Explanation of Symbols
User Manual Rev.3
Packaging unit
Serial number
Catalog Number
Manufacturer
Date of manufacture
Disposal of electrical and electronic equipment as well as used batteries and
accumulators.
This product must not be disposed of with household waste.

Contents
User Manual Rev.3
Basic features of the device
Illustrations
Front of the Device
Rear of the Device
Screens / Displays
Explanation of Symbols
Page
1.
Indications / Contraindications 1
2.
Possible Side Effects and Adverse Events 2
3.
Application Information 3
4.
Warnings 4
5.
Device Set Up 5 - 6
6.
Settings 7 - 8
7.
Operation Instructions 9 - 14
8.
Technical information 15
9.
Cleaning
Disinfection
16
10.
Scope of Delivery and Accessories 17

Contents
User Manual Rev.3
11.
Device Combinations 18
12.
Safety and Maintenance 19
13.
Functional Test 20
14.
Error Messages / Troubleshooting 21 - 23
15.
Manufacturer’s EMC Declaration 24 - 27
Valid for emFieldPro devices
This instructions for use is an integral part of the device. It must be stored with the
device and kept accessible at all times for anyone authorized to operate this device.
The instructions for use is valid as of June 2019
Rx Only U.S.A Federal law restricts this device to sale by or on the order of a licensed
healthcare practitioner licensed by the law of the State in which he/she practices to
use or order of the Device

Indications / Contraindications
1
Page 1
User Manual Rev.3
Indications for use: The emFieldPro is indicated for:
Improvement of abdominal tone
Strengthening of the abdominal muscles
Development of firmer abdomen. 
Strengthening, Toning and Firming of buttocks and thighs
Contraindications: Placing an active applicator over implanted electrical devices like pacemakers,
cochlear implants, intrathecal pumps, hearing aids etc.
Be ensured that magnetic stimulation doesn’t penetrate the heart region.
The emFieldPro should be used with caution in persons with Grave’s disease,
active bleeding disorders or seizure disorders.
Women who are close to menstruation may find that it comes sooner or
cramping is increased / intensified with emFieldPro treatments, therefore we
recommend not undergoing treatment during this time of the month.
Other contraindications to treatment include the following:
Fever
Application over menstruating uterus
Application over areas of the skin that lack normal sensation
Metal or electronic implants in the treatment area
Cardiac pacemakers
Implanted defibrillators
Implanted neurostimulators
Drug pumps
Malignant tumor
Hemorrhagic conditions
Epilepsy
Recent surgical procedure
Application in the area of growth plate
Pulmonary insufficiency
Application in the head area
Pregnancy
Sensitivity or allergy to latex

Possible Side Effects and Adverse Events
2
Page 2
User Manual Rev.3
The adverse effects may include, but are not limited to:
Muscular pain
Temporary muscle spasm
Temporary joint or tendon pain
Local erythema or skin redness

Application Information
3
Page 3
User Manual Rev.3
Before using the emFieldPro on a patient, the user should become acquainted with
the operating instructions and individual treatment methods as well as the indications
/ contraindications, warnings and application information. Additional sources of
information about types of therapy should be consulted..
Before use, ensure that the device is powered via a properly earthed plug with a
grounded mains outlet. The device must only be operated with the supplied power
cord. The power cord must be protected against mechanical stress..
During use, the device is to be located in a position allowing direct access to the
device´s central mains supply so that it can be disconnected for the mains at any
time.
The emFieldPro is not suitable for use in areas with an oxygen rich, explosive,
flammable or combustive environment.
Inspect the device before to use. If there is any damage, it must not be used.
Only accessories provided by Zimmer MedizinSysteme GmbH must be used.
The small applicator should be placed above 1 cm from skin surface to reduce
potential tissue burn.

Warnings
4
Page 4
User Manual Rev.3
Users of the emFieldPro must be trained in how to use the device properly and have
the appropriate skills.
During the therapy, do not place any ferromagnetic or metallic materials, data
carriers or (credit or debit cards, USB flash drivers etc.), electronic devices (mobile
phones, tablets, watches, PCs etc.) and other device applicators or accessories in
the vicinity (less than 3 feet) of the applicator(s). Do not place the device near other
devices that produce strong electromagnetic field (diathermy, X-Ray, cell phones,
radiofrequency) in order to prevent mutual functionality influence. If this happens
move the device further away from the source of interference or contact an
authorized service personal.
Ensure that persons with pacemakers are not present in vicinity of the device in
operation.
Pushing of the device is prohibited if the arm is not in an upright position.
Sitting on the device is prohibited.
The patient must not be left unattended during therapy.
The device is intended to be used exclusively by medical professionals.
Any treatment instructions regarding treatment location, duration and intensity
require medical knowledge and should be given by authorised physicians, therapists
and health paraprofessionals. It is imperative that these instructions are followed.
The use in wet areas is not permitted and may in case of non-compliance lead to
considerable damage to the device and endanger both the patient and the user.
Dispose packaging materials properly. Make sure that it is not accessible to children.

Device Set Up
5
Page 5
User Manual Rev.3
Caution!
1. After the transport and before switching on the device, make sure that the
swiveling wheels are in the ‘locked’ position.
Note Make sure that the emFieldPro is placed on a stable and flat surface
Connect mains cable 2. Connect the mains cable (22) to the socket as shown below on the device (11)
and connect it to the mains.
The device may only be connected to earthed sockets.
Switching the device
on
3. Switch on the device with the power switch (12).
Caution!
Be aware that connecting the power cable with the power switch turned on may
cause malfunction.
Caution!
If the applicator is used while in a tilted position, the cooling oil will not reach all
sections of the applicator and damage the applicator due to overheating. For this
reason, it is recommended to place the applicator in a horizontal position as much
as possible
4. When separating the applicator from the applicator holder, the pressure of the
gas spring may cause the arm to jump up and the applicator may fall off. Be sure to
hold the applicator with one hand while holding the arm vertically. When replacing
the applicator, be sure to mount the holder vertically as well.

Device Set Up
5
Page 6
User Manual Rev.3
5. After using the emFieldPro for a long time, the applicator arm may be stuck down
or up. In this case, the position of the applicator arm can be changed by adjusting
the gas spring pressure. To lower the arm supporter, turn the hexagonal wrench bolt
in the () direction as shown in the figure below, and turn it in the () direction to lift
it upwards.
Caution!
Caution!
6. To adjust the applicator arm use only the supplied hex key (23).
Switching the device
off
7. The device is switched off using the power switch (12).
In order to completely disconnect the device (all-phase) from the mains, remove the
mains cable.

Settings
6
Page 7
User Manual Rev.3
Start up screen 1. Once the device has been switched on and the self-test performed, the start-
up screen opens.
Standard screen 2. After the self-test has been performed, the emFieldPro turns automatically in
the standard screen.
Selecting configuration 3. Pressing the Configuration button (See ‘A’ on image above) the software
switches to the configuration menu.
A

Settings
6
Page 8
User Manual Rev.3
Configuration menu
(B) Brightness Adjust the brightness of the display by using the left and right arrows.
(C) Volume Adjust the volume of the audible signal by using the left and right arrows.
(D) Language Selection of the language by using the left and right arrows
(E) Version Shows information about the current software version
(F) Close Closes and stores the configuration menu
E
F
B
C
D

Operation Instructions
7
Page 9
User Manual Rev.3
Device description: The emFieldPro consist of a main body and 2 applicators connected to it.
The rated power for this equipment is 100-120 V AC 220-240V AC
Repair, expansion, and installation of equipment shall not be performed by anyone
other than the specialized personnel authorized by the manufacturer. Arbitrary
disassembling/assembling of equipment by the user is absolutely prohibited.
As a strong magnetic field is generated around the magnetic field generating section,
equipment operation technicians, assistants, and patients must not hold any items
which can be affected by the magnetic field.
Note When equipment is operated, do not use any items as wristwatches, mobile phones,
radio sets, transmitters or wireless toys as they may be damaged by magnetic fields. So
please be careful and keep them separately.
Note To avoid electromagnetic disturbance during use, the equipment shall be installed at a
significant distance from any generator, X-ray equipment, broadcasting device, mobile
electric wire, and other electromagnetic radiation emitting devices.
Note During the operation of the equipment, the patient shall not take drinks, water, etc.
which can influence the equipment.
The emFieldPro monitors the temperature of the applicator. Besides that the device will
check with regular intervals the connection between applicator and main device.
Please refer to Chapter 14 in case any error message should pop-up.