Zipper Mowers A1 User manual

User Manual
Foldable Electric Scooter
ZIPPER A1

Thanks
CONTENTS
for you choosing our product.Have fun with this electric scooter.
01.The Device &Accessories
02.Functions
03.Assembling
04.Charging scooter
05.Safety instructions
06.Fodling and transportation
07.Care and storage
08.Parameters
09.Presence of toxic and harmful substances
10.Warranty

1.The Device & Accessories
Accessories
Head assembly Body components
M5*12 screw
M5 hex wrench
charger

2.Functions
handlebar
accelerator
hook
Brake handle + handbell
Folding
mechanism
Front
fender
Rear
wheel
Rear
fender
Front
wheel
Battery compartment
kickstand
brakeline
1.Long press (3 seconds), turn on/off function.
2.After starting the machine, press once to turn the headlight
on/off.
3.After starting the machine, press the button for 2
consecutive times and switch to 1/2/3 gear.
4.After starting the machine, press the button for 4
consecutive times to switch to zero start/non-zero start.
5.After starting up, press 5 times in succession to switch the
color of the speed code table.
6.After starting the machine, press the button for 6 times in
succession, and then switch to km/mil

3.Assembling the device
1.Assemble the horizontal handle assembly with the riser
2.Tighten the screws
3.Folding mechanism with upright pole

4.Charging scooter 5.Safety instructions
1.It is not recommended driving on the rain.
2.Please do not hang backpacks and
other heavy objects on handlebars

It is forbidden to leave or ride a scooter at high roadway,
motorway or ride it at a high speed
It is forbidden to drive through puddles,to which
exceeds depth of 2cm Never rider a scooter more than one person or hold a child in your arms
When driving is forbidden by one foot

Do not tread the back of the fender Do not touch the disc brake
Do not driving leaving your hands Do not ridding the scooter up,down steps or jump over obstacles

07.Fodling and transportation
Transportation
You can transfer electric scooter by
one hand or two hands

If you notice that
the locking
mechanism of the
scooter is a little
loose, follow these
steps:
Step 1.Use the M2
to loosen the
screw
counterclockwise
Step 2:Use the M5
to loosen the
screw
counterclockwise
Step 3: Use the
M2 to tighten the
screws, close the
folding gear, and
try the scooter
Step 1/Step 3
Step 2