ZKTeco G5 User manual

QUICK START GUIDE
Applicable Model: G5
Version: 1.0
Date: May 2023
Outdoor & Multi-Biometric
Access Control Terminal

Safety Precautions
Before installation, please read the following precautions carefully to prevent
the risks of danger to the users of this product or those nearby and damaging
the device.
Do not expose to direct sunlight, water, dust and soot.
Do not place any magnetic objects near the product. Magnetic objects
such as magnets, CRT, TV, monitors or speakers may damage the device.
Do not place the device next to heating equipment.
Prevent water, drinks or chemicals leaking into the device.
This product is not intended for use by children unless they are
supervised.
Do not drop or damage the device.
Do not disassemble, repair or modify the device.
Do not use the device for any purpose other than those specified.
Remove dusts or dirts regularly. While cleaning, wipe dust off with a
smooth cloth or towel instead of water.
Contact your supplier in case of any problem!
1

2
Device Overview
Visible Light Camera
Near-infrared Camera
Near-infrared Flash
8" HD Capacitive Touch Screen
Microphone
Fingerprint Scanner
Built-in ID Card Reader
Speaker
USB Port
Micro USB
Back Plate
Terminal Block
11.004" (279.5mm)
5.551" (141.0mm)
1.142" (29.0mm)

3
Terminal Block
AUXIN
SEN
BUT
GND
NO
COM1
NC1
ALARM-
ALARM+
12V OUT
GND
485B
485A
232TXD
232RXD
WD0
WD1
IWD0
IWD1
BELL+
BELL-
Auxiliary Input
Sensor
Exit Button
Alarm
Power Out
Power In
RS485
RS232
Lock
Wiegand Out
Wiegand In
Bell
USB
Ethernet

4
Product Installation
The recommended distance
Installation on the wall
First passing the wires through the wiring hole in the back plate.
Drill holes at suitable locations on the wall, then fix the back plate to the wall with mounting screws,
the recommended distance from the camera to the ground is 61.024 (1.55m). inches
Then attach the device to the back plate from top to bottom.
Fasten the device to the back plate with a security screw.
1 2
43
For users whose height is between 55.118" to 70.866" (1.4m to 1.8m), the
recommended height of the equipment is 61.024" (1.55m), and the
distance from the personnel to the equipment is 19.685" (0.5m). Users not
in the range can adjust the position by moving back and forth according
to the actual situation.
61.024" (1.55m)
19.685" (0.5m)
①
②
③
④
1
2

5
Ethernet Connection
Recommended power supply
Power & Ethernet Connection
Power Connection
Recommended AC adapter 12V 3A:,
AC adapterTo share the power with other devices, use an with higher current ratings.
AC Adapter
RouterNetwork Cable

6
Access Control & Reader Connection
Access Control Connection
Reader Connection
12V OUT
GND
485B
485A
232TXD
232RXD
WD0
WD1
IWD0
IWD1
+12V
GND
485-
485+
+12V
GND
RXD
TXD
RS485 Reader
RS232 Reader
Wiegand Reader
+12V
GND
WD0
WD1
12V OUT
GND
485B
485A
232TXD
232RXD
WD0
WD1
IWD0
IWD1
WD0
WD1
GND
GND
+12V
Access
Controller
Do not use
Do not use

7
Lock Relay Connection
Device not sharing power with the lock is shown below:
DC12V, 3A
AC Adapter
NC COM NO
V- V+
FR107
Magnetic Lock
DO NOT REVERSE
THE CONNECTION.
+12V
GND
AUXIN
SEN
BUT
GND
NO
COM1
NC1
ALARM-
ALARM+
+12V DC
Device sharing power with the lock is shown below:
DC12V, 3A
AC Adapter
NC COM NO
V- V+
FR107
Magnetic Lock
DO NOT REVERSE
THE CONNECTION.
+12V
GND
AUXIN
SEN
BUT
GND
NO
COM1
NC1
ALARM-
ALARM+
The system supports both Normally Opened Lock and Normally Closed Lock. The NO Lock (Normally Opened
when powered) is connected with 'NO' and 'COM' terminals, and the NC Lock (Normally Closed when powered)
is connected with 'NC' and 'COM' terminals. The power can be shared with the lock or can be used separately for
the lock, as shown in the example with NC Lock below:
Do not use
Do not use

8
Bell Connection
BELL+
BELL-
Door Bell
Smoke Detector, Door Sensor, Exit Button & Alarm Connection
NO
COM
+12V DC
Alarm
Detector Power
Smoke Detector
Exit Button
+12V DC
Alarm Power
+12V DC
Bell Power
AUXIN
SEN
BUT
GND
NO
COM1
NC1
ALARM-
ALARM+
Door Sensor
Connecting Other Devices
Do not use

Standalone Installation
WAN
PC
Option A Option B
TCP/IP
3G
PC
SWITCH
Door Sensor
Exit Button
Lock
Alarm
9
Smoke Detector
Door Bell
USB Disk

Menu Functions
Enroll New User
Click > User Management > > New User to register a new user. The procedure includes
entering , the User ID and Name, choosing User Role, registering Fingerprint, enroll Card Number
setting Password and setting Access Control Role.
When there is no Super Administrator set in the device, click to enter the menu. Add a new user
and set the User Role to Super Admin, then the system will request for Administrator’s verification
before entering the menu. It is recommended to register a Super Administrator initially for security
purposes.
10

11
Menu Functions
Access Settings
Network Settings
Click > Access Control > Access Control Options to enter the setting interface.
Click > System Settings > Network settings to set the network parameters. If the TCP/IP
communication of the device is successful, the icon will be displayed in the top right corner
of the standby interface.

Menu Functions
Attendance Search
Click > Attendance Search > Access Logs (records of all users will be displayed) > select
Time Range > press OK, the corresponding attendance logs will be displayed.
Click > USB Management > Download to USB. Insert the USB disk correctly and download
the data to the USB drive, then copy this data from the USB drive to your PC. The downloaded
data filename will be ”Device Serial Number.dat”, you can open and view it.
View records on computer:
View records in the device:
12

Date and Time Settings
Menu Functions & Troubleshooting
Troubleshooting
1. Fingerprint can t be or it takes too long.’ detected
Ø Check whether finger or fingerprint sensor is stained with sweat, water, or dust. the
Ø Retry after wiping finger and fingerprint sensor with dry paper tissue or a mildlythe
wet cloth.
Ø the to tipIf fingerprint is too dry, blow on the finger and retry.
2. F . ailed to gain access after successful verification
ØCheck with administrator whether the enrolled fingerprint has been deleted from the
.device or not
3. Door doesn’t open after successful verification.
ØCheck the lock open duration is set appropriatif parameter ely.
Click > System Settings > Date and Time, to enter Date and Time setting interface.
13

Specifications
G5
64bit Eight Core Customized Computer Vision CPU
Android 9.0
2GB LPDDR3 16GB eMMC
Android LCDP, PUSH SDK
2.4GHz/5.0GHz Dual Frequency; IEEE 802.11 a/b/g/n/ac
8 inch TFT LCDColor Screen
Capacitive Touch Screen
800*1280
2MP Binocular Camera
125kHz ID card & 13.56MHz IC card
Multi-tech Card Module (optional)
ISO14443A/B & ISO15693 & HID Prox
Dynamic QR codes on the ZKBioSecurity mobile application
QR code, PDF417, Data Matrix, MicroPDF417,
Aztec scanning in third-party development projects
100,000
100,000
30,000
100,000
5,000,000
Push, Schedule Bell, Automatic Status Switch, Record Query,
Access Levels, Groups, Holidays, DST, Duress Mode (Password
& Fingerprint), Anti-Passback, Customization of Wallpaper &
Screen Saver, Tamper Alarm
English, Korean, Latin American, Indonesian, Vietnamese,
Traditional Chinese, Portuguese, Spanish, Farsi, Japanese,
Russian and Thai
BioTime 8.0 , ZKBioSecurity，ZKBioCV Security
Model
CPU
Operation System
Storage
SDK
WLAN
Display
Screen Type
Resolution
Camera
Card Type
QR Code (optional)
User Capacity
Face Templates Capacity
Fingerprint Capacity (optional)
Card Capacity
Record Capacity
Firmware Functions
Language
Software
14

ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 - 82109991
Fax : +86 755 - 89602394
www.zkteco.com
Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved.