Moneris iWL255 User manual

Using
Your
Terminal
Moneris® iWL255
Long-Range Mobile
(09/13)

2
Record your Moneris merchant number here:
Need help?
Call 1-866-319-7450

1
Moneris iWL255 Long-Range Mobile .............. 2
Wireless communication ........................ 4
Battery use ..................................... 5
Card entry options .............................. 6
Transactions .................................... 8
Receipts ........................................ 19
Reporting ....................................... 21
Administrative transactions ..................... 24
End-of-day process .............................. 25
Troubleshooting ................................ 27
Contents

2
Use this wireless, all-in-one terminal to process
transactions at the point of sale (POS).
When prompted, you (and sometimes your customer)
will key in information on the terminal. If your
customer is required to key in information, pass the
terminal to the customer. When the customer has
finished keying in the information, retrieve the terminal
and complete the transaction.
Cards accepted
• Magnetic stripe cards
• Chip cards
• Contactless cards
6
1
7
2
3
5
b
4
c
a
d
f
e
Moneris iWL255
Long-Range Mobile
Moneris iWL255
Long-Range Mobile

3
Terminal keys
1 Function keys
• Move through the menu items on the display.
• Select the option displayed above the key: e.g. if YES
displays above the key, press that key to select YES.
If displays above the key, press that key to scroll up.
• To select an item, scroll through the list until the
item is highlighted (e.g. LOGON vs. LOGON ), and
then press the key.
2 Power Off key
• Press only at the READY screen displaying a $0.00
amount. When “POWER OFF TERMINAL?” appears,
select YES to power off.
3 Alpha-numeric keys
• Key in numbers, letters and punctuation (with the
Admin key).
4 Admin key
• G o to the MAIN MENU from the READY screen.
• S elect letters and punctuation (with the alpha-numeric
keys).
5 Cancel key
• Cancel a transaction.
• Move back one screen at a time.
6 Correct key / Paper Feed
• Clear displayed data one character at a time.
• Press and hold down to advance the receipt paper
from the printer when the terminal is powered on.
7 OK/Enter
• Accept displayed data.
• Submit data.
• Select highlighted menu item.
Terminal hardware
a Direct-to-Terminal Charge Cable Port (lift flap)
b Printer (to advance receipt paper, see label 6 above)
c Keypad
d Magnetic Stripe Reader
e Chip Reader
f Display screen / Contactless reader
Note: If the backlight goes off (i.e., buttons lose their
glow), press any key. The keys function even if light is off.
Moneris iWL255
Long-Range Mobile
Moneris iWL255
Long-Range Mobile

The iWL255 Long-Range Mobile terminal uses long-range
wireless communications to send and receive information
to and from the Moneris Host. The communications
indicators (described below) display in the terminal’s
on-screen info header:
3G status indicators
Icon Description
Terminal is configured to connect to the authorized
carrier’s 3G wireless network.
Connection to wireless network established.
To test 3G wireless communication:
1. While the terminal is powered on, confirm that the
3G status icons listed above are displayed.
Note: Periodically the two icons may
be coloured grey and display like this:
You may still process transactions if this happens.
2. Confirm that there is sufficient signal strength
(see Signal strength indicator table below).
Signal strength indicator
Icon Description
5 bars: Terminal is receiving a very strong signal
from the network and can process transactions.
4 bars: Terminal is receiving a strong signal
from the network and can process transactions.
3 bars: Terminal is receiving a good signal from the
network and can process transactions.
2 bars: Terminal is receiving a signal from the
network and can process transactions but may take
longer to complete them.
1 bar: The terminal is receiving a weak signal and
may not be able to process transactions and/or print
receipts.
0 bars: The terminal is not receiving any signal and
CANNOT process transactions.
4
Wireless communication

5
To maintain battery charge, use any method below:
• Direct-to-terminal charge cable: Connect this cable
to the side port (see page 3), and plug the other end
into a working power outlet.
• Charge base: Dock the terminal on a powered base.
Helpful hints:
• Check the battery charge level before use.
• Power off the terminal if not in use or charging.
Battery status indicators
The battery icon displays in the info header. The icon
reflects the battery charge status/charge level.
Terminal connected to external power source
The “plug” portion of the battery icon appears
only when the terminal is connected to an
external power source.
Battery charge status/level
The coloured bars blink (one level at a time) when the
battery is charging.
100%
charge
or less
80%
charge
or less
60%
charge
or less
40%
charge
or less
20%
charge
or less1
0%
charge2
1 Recharge the battery as soon as possible. The terminal may power off.
(Data will not be lost if this happens.)
2 The terminal will power off unless connected to a power source.
(Data will not be lost if the terminal powers off.)
Stand-By mode
The terminal goes into Stand-By mode (i.e., the white
backlight turns off) when it has not been used for a
set time period. To exit Stand-By mode, press any key.
Power on
• Press the key. If the terminal does not power on,
connect it to a power source.
Power off
1. Ensure that the terminal is not connected to a
power source.
2. From the READY screen, press the key twice,
key in 49, and press the key. When “POWER OFF
TERMINAL?” appears, press the key (YES).
Wireless communication Battery use

6
Card entry options
Insert: Chip cards
1. “SWIPE OR INSERT
CARD” or
“SWIPE/INSERT/TAP
CARD” displays on the
terminal.
2. Either you or the
customer inserts the
card into the device’s
chip reader.
Note: Unless the terminal prompts otherwise, do not
swipe a chip card even if the card has a magnetic stripe.
3. The customer may be prompted to key in a PIN.
4. The chip card must remain inserted until the
“REMOVE CARD” prompt displays.
Swipe: Magnetic stripe cards
1. “SWIPE CARD” or
“SWIPE OR INSERT
CARD” or “SWIPE/INSERT
/TAP CARD” displays
on the terminal.
2. Swipe the card on the
terminal’s magnetic
stripe reader.
Note: If the card has a chip and the terminal is
enabled to read chip cards, the card must be inserted
into the chip reader.
Manual card entry
If all available card entry methods fail, you may
manually enter the card number for credit cards
and some chip debit cards.
1. “SWIPE CARD” or “SWIPE OR INSERT CARD” or
“SWIPE/INSERT/TAP CARD” displays on the terminal.
2. Key in the card number on the terminal, and press
the key.
3. Key in the card’s expiry date (MMYY) on the terminal,
and press the key.
• If “SWIPE ADMIN CARD” appears, swipe your POS
Admin card on the terminal.
• If “TAKE MANUAL IMPRINT OF CARD AND PRESS
OK” appears, take a manual imprint of the card,
and then press the key.

7
Wave/Tap: Contactless cards
1. “SWIPE/INSERT/TAP
CARD” displays on
the terminal.
2. The customer taps
their card over the
display screen where
the icon appears.
3. Note the following:
• Your merchant account and terminal must be
configured for contactless functionality.
• The cardholder will not be prompted to enter a PIN.
• Only Purchases and Refunds are allowed.
• The transaction amount must be equal to or less
than the maximum Contactless Dollar Value
(see below) set for the card.
Maximum Contactless Dollar Value (CDV)
• Credit Cards: To determine the maximum CDV for
a card, print a Configuration report (see page 20).
Look for the DOMESTIC TXN LIMIT found near the
end of the report in the CVM LIMITS section under
the card type (see Transaction $ Limits on the Config
Report on page 20).
Note: If a card is tapped for an amount that
exceeds its maximum CDV, the terminal will display
“CONTACTLESS TRANSACTION LIMIT EXCEEDED”or
“NO SUPPORTED APPLICATIONS” (see messages on
pages 28 and 29 respectively).
• Debit Cards: The maximum CDV is determined by
the card and does not appear on any report.
Note: If a card is tapped for an amount that exceeds
its maximum CDV, the terminal will display
“TAP FAILED PLEASE INSERT OR SWIPE CARD”
(see message on page 29).
IMPORTANT:
• The card must have one of these labels:
Visa payWave or MasterCard PayPass or
Amex ExpressPay or Interac Flash.
• The card must be within 0.5 in. (1.3 cm) of the
terminal screen, but it does not have to touch it.
• The card must be tapped or waved by itself
(the customer cannot leave the card in their wallet
and wave it in front of the screen).

8
All instructions in this guide begin at the READY
screen. To access the READY screen from any other
screen, press the key repeatedly until the READY
screen appears.
Financial transactions
General guidelines
1. Before processing transactions, ensure that the
wireless signal strength (see Signal strength
indicator on page 4) is at a sufficient level.
2. Determine the transaction to be processed
(e.g. Purchase or Refund).
3. Establish the means of payment (credit or debit).
4. Enter the card data on the terminal (see pages 6-7).
5. Follow the terminal prompts* (see pages 9-18).
6. Process receipts (see page 19).
* Prompts may vary depending on variables such
as terminal setup, merchant setup and card type.
Note: Some debit cards may display Cashback
and/or Account Selection and PIN prompts after
the terminal has been returned to you; hand the
terminal back to the customer to respond to these
prompts.
Admin code shortcuts
To bypass scrolling through menus to select a
transaction, use the Admin codes to jump directly
to a transaction. Admin codes can be found in this
guide in square brackets beside the transaction name
(e.g. Logon [02] means the Admin code for logging
on is 02).
To use an Admin code:
1. Press the key until “ENTER ADMIN CODE”
appears.
2. Key in the Admin code, and press the key.
The transaction appears.
To print a list of all Admin codes:
1. Press the key until “ENTER ADMIN CODE”
appears.
2. Key in 40, and press the key.
Transactions

9
Purchase [100]
Credit or debit purchase of goods or services.
1. If PURCHASE is the default, key in a Purchase
amount. (If PURCHASE is not the default: Press the
key, select TRANSACTIONS, select PURCHASE,
and then key in a Purchase amount.)
2. Press the key.
3. Follow the merchant prompts table on page 12.
Refund [101]
VOID–Purchase [106] / VOID–Refund [107]
A Refund credits a customer’s account. A Void cancels
the original Purchase or Refund.
Note: Credit card Voids must be processed in the same
batch as the original transaction.
1. Press the key, select TRANSACTIONS, and then
select the transaction (REFUND or VOID-PURCHASE
or VOID-REFUND).
• If “SWIPE ADMIN CARD” appears, swipe your POS
Admin card.
2. Key in the transaction amount, and press the
key.
3. Follow the merchant prompts table on page 12.
Pre-Authorization [102]
Authorization if the final Purchase amount is
unknown (e.g. hotel or car rental).
1. If PRE-AUTH is the default, key in a Pre-Auth amount.
(If PRE-AUTH is not the default: Press the key,
select TRANSACTIONS, select PRE-AUTH, and then key
in a Pre-Auth amount.)
2. Press the key.
3. Follow the merchant prompts table on page 12.
Note: When the final Purchase amount is known,
you must perform an Advice for the final amount
using the same card number (see Advice options
on pages 10 and 11).

10
Cheque Authorization [105]
1. Press the key, select TRANSACTIONS, and select
CHEQUE AUTH.
2. Do one of the following:
• To do the authorization by credit card, select
CREDIT CARD.
• To do the authorization by driver’s licence, select
DRIVERS LICNCE.
3. Key in the cheque amount, and press the key.
4. Follow the merchant prompts table on page 14.
5. On the cheque, record the 8-digit “APPROVED”
number, and then press the key.
Note: Receipts are not printed. ID types and province/
state codes are provided by the auth service.
Advice using Sequence Number [103] /
Force Post [103]
An Advice transaction completes or cancels a
Pre-Auth. A Force Post transaction completes a voice-
authorized purchase.
Note: The Advice transaction must be processed on the
same terminal as the original Pre-Auth.
1. Press the key, select TRANSACTIONS, and then
select P-A ADVICE.
2. Follow the merchant prompts table on page 15.

11
Advice List [109]
Completes or cancels a Pre-Auth from a list.
Note: The Advice List (P-A ADV LIST) option will appear
only if Tip Reporting is enabled. The Advice must be
processed on the same terminal as the original Pre-Auth.
1. Press the key, select TRANSACTIONS, and then
select P-A ADV LIST.
2. When “SWIPE ADMIN CARD” appears, swipe your
POS Admin card to display unmasked card numbers.
Otherwise, simply press the key to mask the
numbers.
• If “ENTER CLERK ID” appears: To narrow the search
by Clerk ID, key in a clerk ID, and press the key.
Otherwise, press the key for retrieval
regardless of Clerk ID.
3. When “ENTER AMOUNT” or “DATE” or “BATCH
NUMBER” appears: To narrow the scope of your
search, key in the required data, and then press
the key. Otherwise, for retrieval regardless
of the specified prompt, simply press the key
without entering the requested data.
4. Scroll to the Pre-Auth that you want to complete or
cancel (e.g., “PA1234 $#.##”), and press the key.
5. Press the key (COMPL), and follow the merchant
prompts table on page 15.

12
Merchant prompts:
Purchases/Pre-Auths/Refunds/Voids
This table lists in order of appearance the prompts
(and the actions to take for each) that you might see
on the terminal during a Purchase, Pre-Auth, Refund,
or Void.
Note: Only some of the prompts listed below will
appear for any one transaction.
Merchant prompt Merchant action(s)
ENTER
CLERK ID
Key in your Clerk ID, and press the
key.
ENTER INVOICE NO Key in an alpha/numeric identifier, and
press the key, or simply press the
key to bypass.
ENTER ORIGINAL
AUTHORIZATION #
Key in the 6-digit AUTH# from the
original transaction receipt (see page 19),
and press the key.
SWIPE CARD
or
SWIPE OR INSERT
CARD
or
SWIPE/INSERT/TAP
CARD
Enter the card on the terminal
(see pages 6-7 for options).
ENTER LAST
4 DIGITS
Key in the last four digits of the card
number, and press the key.
ENTER EXPIRY
DATE
Key in the card’s expiry date (MMYY),
and press the key.
SWIPE ADMIN CARD Swipe your POS Admin card.
REGULAR
MAIL/TEL If cardholder is present: Press the
key to select REGULAR.
If cardholder is not present: Scroll to
MAIL/TEL, and press the key.
SINGLE
RECURRING
INSTALLMENT
OTHER
Scroll to the option that best describes
the transaction, and press the key.
TAKE MANUAL
IMPRINT OF CARD
AND PRESS OK
Take a manual imprint of the card, and
press the key.
This table continues on the next page...

13
Merchant prompt Merchant action(s)
SELECT
<Application name>
YES NO
To select the displayed application:
Press the key (YES). To view the next
available application on the card: Press
the key (NO).
<Application name>
-OK?
YES NO
To use the displayed application, press
the key (YES).
ENTER ORIGINAL
AUTHORIZATION #
Key in the 6-digit AUTH# found on the
original transaction receipt (see page 19),
and press the key.
CUSTOMER
PRESS OK
TO CONTINUE
Pass the terminal to the cardholder
(see Customer prompts on page 17).
RETURN TO CLERK Press the key to continue.
APPROVED
########
Press the key, and process any
receipt that prints (see page 19).

14
Merchant prompts: Cheque Authorizations
This table lists in order of appearance the prompts
(and the action to take for each) for this transaction.
Merchant prompt Merchant action(s)
ENTER DRIVERS
LICENCE NUMBER
Key in the cheque-holder’s driver’s
licence number, and press the key.
ENTER PROVINCE
OR STATE CODE
Key in the cheque-holder’s 2-digit
province/state code, and press the
key.
ENTER BIRTH DATE Key in the cheque-holder’s birth date
(YYMMDD), and press the key.
SWIPE CARD Enter the card on the terminal
(see page 6 for options).
ENTER LAST
4 DIGITS
Key in the last four digits of the card
number, and press the key.
ENTER EXPIRY
DATE
Key in the card’s expiry date (MMYY),
and press the key.
SWIPE ADMIN CARD Swipe your POS Admin card.
APPROVED
########
Go back to Cheque Authorization on
page 10, and continue at step 5 of that
procedure.

15
Merchant prompts: Advices/Force Posts
This table lists in order of appearance the prompts
(and the actions to take for each) that you might see
on the terminal during an Advice or Force Post.
Note: Only some of the prompts listed below will
appear for any one transaction.
Merchant prompt Merchant action(s)
FIND ORIGINAL
TRANSACTION?
YES NO
To do an Advice: Press the key (YES).
To do a Force Post: Press the key (NO).
ENTER ORIGINAL
SEQUENCE NUMBER
Key in the required 6-digit portion of
the RECEIPT NUMBER found on the
Pre-Auth receipt (to locate the required
6 digits, see Pre-Auth Receipt on page 19),
and press the key.
1234567890123456
PRESS [OK]
Press the key to confirm the
displayed card number.
EN TE R A M O U N T
$#.##
Advice:
• To complete the Pre-Auth: Key in the
amount written on the Total line
(sum of the printed Pre-Auth amount
plus written Tip amount if any, see
Pre-Auth Receipt on page 19), and press
the key.
• To cancel the Pre-Auth: Press the
key (this enters $0.00), and press the
key.
Voice Auth:
• Key in the authorized transaction
amount, and press the key.
ENTER ORIGINAL
AMOUNT
$#.##
Advice:
• To complete the Pre-Auth: Key in the
printed Pre-Auth amount found on
the receipt (see Pre-Auth Receipt on
page 19), and press the key.
• To cancel the Pre-Auth: Press the
key (this enters $0.00), and press the
key.
Voice Auth:
• Key in the authorized transaction
amount, and press the key.
E N T E R T I P A M O U N T
$0.00
For Advice: Key in the amount written
on the Tip line (see Pre-Auth Receipt on
page 19), and press the key.
For Voice Auth: Key in the authorized Tip
amount, and press the key.
This table continues on the next page...

16
Merchant prompt Merchant action(s)
F I N A L A M O U N T
$#.##-OK?
Press the key to continue.
ENTER
CLERK ID
Key in your Clerk ID, and press the
key, or simply press the key to
accept the displayed ID.
ENTER INVOICE NO Key in an alpha/numeric identifier, and
press the key, or simply press the
key to bypass.
ENTER ORIGINAL
AUTHORIZATION #
Key in the (voice) Auth # written on your
paper sales draft, and press the key.
ENTER CARD
NUMBER
Key in the card number, and press the
key.
ENTER EXPIRY
DATE
Key in the card’s expiry date (MMYY),
and press the key.
SWIPE ADMIN CARD Swipe your POS Admin card.
REGULAR
MAIL/TEL
If cardholder is present: Press the
key to select REGULAR.
If cardholder is not present: Scroll to
MAIL/TEL, and press the key.
SINGLE
RECURRING
INSTALLMENT
OTHER
Scroll to the option that best describes
the transaction, and press the key.
ENTER INVOICE NO Key in an alpha/numeric identifier, and
press the key, or simply press the
key to bypass.
APPROVED
#########
Press the key, and process any
receipts that print (see page 19).
FIND ORIGINAL
TRANSACTION?
YES NO
To process next Advice: Press the key
(YES). To return to READY screen: Press the
key (NO), then press the key.
TRANSACTION
NOT FOUND
Press the key to return to the READY
screen. (There are no other Pre-Auths
stored in the terminal’s memory.)

17
Customer prompts
This table lists in order of appearance the prompts
(and the actions to take for each) that your customers
might see on the terminal during a transaction.
Note: Only some of the prompts listed below will
appear for any one transaction.
Customer prompt Customer action(s)
CUSTOMER
PRESS OK
TO CONTINUE
Presses the key.
SELECT LANGUAGE
ENGLISH FRANCAIS
For English prompts: Presses the key
(ENGLISH). For French prompts: Presses
the key (FRANCAIS).
SELECT
<Application name>
YES NO
To select the displayed application:
Presses the key (YES). To view the
next available application on the card:
Presses the key (NO).
<Application name>-
OK?
YES NO
Presses the key (YES) to confirm
that they wish to use the displayed
application.
CASH BACK?
YES NO
To receive Cashback: Presses the key (YES).
For no Cashback: Presses the key (NO).
SELECT CASH BACK
$AA $BB $CC
Presses the or or key to select
a displayed Cashback amount.
SELECT CASH BACK
$AA $BB OTHER
To select a displayed amount: Presses
the ($AA) key or the ($BB) key.
To select a different amount: Presses
the key (OTHER), keys in an amount,
then presses the key.
PURCHASE
$#.##-OK?
Presses the key to confirm the
displayed amount.
ENTER TIP OR
PRESS OK
AA% OTHER
To select the preset %: Presses the
(AA%) key.
To enter a different amount: Presses
the (OTHER) key. To bypass entering
Tip: Presses the key.
ENTER TIP OR
PRESS OK
PERCENT AMOUNT
% $
To enter Tip: Presses the key (%) or
the key ($). To bypass entering Tip:
Presses the key.
ENTER TIP
PERCENTAGE
AA%
Keys in a percentage (or nothing at all),
then presses the key.
This table continues on the next page...

18
Customer prompt Customer action(s)
ENTER TIP AMOUNT
$0.00
Keys in a dollar amount (or nothing
at all), then presses the key.
<TRANSACTION
NAME>
$#.##-OK?
Presses the key to confirm the
displayed amount.
SELECT ACCOUNT
CHEQUING SAVINGS
For chequing account: Presses the key
(CHEQUING). For savings account:
Presses the key (SAVINGS).
ENTER PIN & OK Keys in their PIN (Personal Identification
Number) and presses the key.
RETURN TO CLERK Returns the terminal to you (see RETURN
TO CLERK prompt on page 13).
APPROVED
########
Returns the terminal to you
(see APPROVED ######## prompt
on page 13).
REMOVE CARD Removes their card from the chip reader,
and returns the terminal to you
(see APPROVED ######## prompt on
page 13).