Ingenico group iSMP v4 Wi-Fi User manual

www.ingenico.com
28/32, boulevard de Grenelle, 75015 Paris - France / (T) [phone] / (F) [phone]
Ingenico Group – S.A. au capital de 61 493 241 € / 317 218 758 RCS PARIS
iSMP v4 Wi-Fi
Manual Configuration Guide
Jake Goodman
January 8th, 2018

iSMP v4 Wi-Fi
2/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
Contents
1Objective ............................................................................................3
2Audience ............................................................................................4
3Accessing Device Functions ............................................................5
4Powering On Wi-Fi Module ...............................................................7
5Configuring Wi-Fi.............................................................................11
6Setting POS Comm Type.................................................................21

iSMP v4 Wi-Fi
3/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
1Objective
This document is created for setting and configuring Wi-Fi via the menus within the iSMP4. While there
are other means to handle some of this, this focuses on end user level configuration.

iSMP v4 Wi-Fi
4/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
2Audience
This document is intended for merchant-level (employees at the station or in the back office) to walk
through and conform the device’s Wi-Fi to the local area network’s criteria. Please confer with your IT /
Network admin on the specific values needed for the criteria outlined in this document.

iSMP v4 Wi-Fi
5/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
3Accessing Device Functions
This section will cover the necessary steps to access the Telium Manager upon starting the device.
A. Power device on and wait until device displays the above; this is what is referred to as the
“splash screen”. Using the device keypad, immediately enter the following sequence:
<2>, <6>, <3>, <4>, then <Enter>

iSMP v4 Wi-Fi
6/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
B. Please give the device several seconds, and you should be directed to the above display.
Press the <F> button.
C. This is the Functions menu. NOTE: This will be the starting point for several below sections.

iSMP v4 Wi-Fi
7/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
4Powering On Wi-Fi Module
Before setting up the device to access your Wi-Fi network, you must assure the module is turned on for
Wi-Fi to search and add the device to the WiFi network.
A. In the Functions menu, scroll down using <F2> or press <3> to select 3-TDA. (For developers,
this can also be configured and loaded with the TDA.xml in the DP provided by Ingenico)

iSMP v4 Wi-Fi
8/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
B. Select 0-Configuration.
C. Select 0-Communication.

iSMP v4 Wi-Fi
9/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
D. Select 3-Wifi Settings.
E. Select 0-Power.

iSMP v4 Wi-Fi
10/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
F. Select 1-ON. NOTE: If the below prompt doesn’t display you can press <Cancel> (Red button
marked with “X”) several times until it appears.
G. Select 1-Yes to Save and Reboot (required).

iSMP v4 Wi-Fi
11/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
5Configuring Wi-Fi
Following the previous steps, the device is now able to be configured with you or your company’s
wireless local area network. Please make sure you’ve obtained the proper values from your network
admin or technical support.
A. Beginning at the Functions menu, select 0-Telium Manager.

iSMP v4 Wi-Fi
12/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
B. Under Telium Manager, select 3-Initialization.
C. Select 2-Hardware.

iSMP v4 Wi-Fi
13/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
D. Select 5-Wifi.
E. Select 2-Scan network to find the corresponding SSID or select “Other” if the network is hidden.

iSMP v4 Wi-Fi
14/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
F. The above will display while the network searches for nearby access points.
G. Using <F2> or <F3> to scroll up or down to find the respective SSID. The last selection is Other;
you will select this to set up your hidden network.

iSMP v4 Wi-Fi
15/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
H. Select 2-Yes, to begin setting the connection to your hidden access point.
I. Enter the designated SSID provided. NOTE: F1=left, F2=down, F3=up, F4=right.

iSMP v4 Wi-Fi
16/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
J. Select Enterprise Security. NOTE: If not supporting specific encryption, select Home Security
and move to Step L.
K. Select your network’s designated Extensible Authentication Protocol (EAP).

iSMP v4 Wi-Fi
17/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
L. For Home Security, enter the password
M. Priority, as to which network is used first if multiple set, will besetto 20, whether using Enterprise
or Home Security. This is the final step if using Home Security.

iSMP v4 Wi-Fi
18/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
N. Next you will select which Phase 2 Auth technology used.
O. Enter your provided network log in credentials, both User and Password. NOTE: Password is
case-sensitive.

iSMP v4 Wi-Fi
19/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
P. If there is a Certification Authority to select, do so here.

iSMP v4 Wi-Fi
20/23
Ingenico document - Reproduction or disclosure prohibited without written authorization
Please check document validity before using
If you’ve successfully connected to your network the above will display in the top right of the devices
screen. It will display signal strength and your network name next to the Wi-Fi icon.