Zte Blade A71 User manual

1
Quick Start Guide (en)……………….………2
Kurzanleitung (de) …………………………15
Ghid rapid (ro) ………………………………29
Vodič za brzi početak (sr)……………………43
Skrócona instrukcja obsługi (pl) …………..57
Kratke upute (hr) ………………………….…71
Οδηγός γρήγορης έναρξης (el) ……………85
Rövid üzembe helyezési útmutató (hu) .......99
Stručný návod na obsluhu (sk) ……………113
Stručný návod k použití (cs) ………………127
Ръководство за бърз старт (bg) …………141
Водич за почеток на користење (mk) ….155

2
ZTE Blade A71
Quick Start Guide

3
LEGAL INFORMATION
Copyright © 2021 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means, electronic
or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update specifications in
this guide without prior notice.
We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at
www.ztedevices.com) for more information on self-
service and supported product models. Information on
the website takes precedence.
Visit https://www.ztedevices.com to download the
user manual. Just click Support from the home page
and then select the location, product type, and name to
search for related support information.
Disclaimer
ZTE Corporation expressly disclaims any liability for
faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may differ
from the actual product. Content in this guide may differ
from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth®word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by ZTE Corporation is under license.
microSDXC Logo is a trademark of SD-3C, LLC.
Other trademarks and trade names are those of their
respective owners.
Version No.: R1.0
Edition Time : February 5, 2021

4
Getting to Know Your Phone
Front camera
Touch screen
Earpiece
Volume key
Power key
/
Fingerprint
sensor
Charging/USB
Type-C jack
Headset jac
k
Back cameras
and flash
Speaker
Indicator light
nano-SIM
/
microSDXC
card tray
Proximity &
light sensor

5
Setting Up Your Phone
The nano-SIM card(s) can be installed or removed while
the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other
kind of SIM cards, or any non-standard nano-SIM card
cut from a SIM card. You can get a standard nano-SIM
card from your service provider.
1. Insert the tip of the tray eject tool into the hole on
the card tray.
CAUTION:
Never replace the included tray eject tool with sharp
objects. Ensure that the tray eject tool is perpendicular
to the hole. Otherwise, the phone may be damaged.

6
2. Pull out the card tray. You can place a nano-SIM
card on the right card slot, and place a nano-SIM
card or a microSDXC card (optional) on the left card
slot, as shown. Carefully slide the tray back into
place.
NOTE:
If two nano-SIM cards are installed, both cards can
connect to the 4G, 3G, or 2G network, and either card
can be used for mobile data.
Charging the Phone
Your phone’s battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C cables.
The use of unapproved accessories could damage your
phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.

7
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In
this case, try again after charging the phone for at least
20 minutes. Contact the customer service if you still
cannot power on the phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
•Press and hold the Power key to turn on your
phone.
•To power off, press and hold the Power key to open
the options menu, and touch >.

8
NOTE:
If the screen freezes or takes too long to respond, try
pressing and holding the Power key for over 10 seconds
to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it
is not in use for some time. The display is turned off to
save power and the keys are locked to prevent
accidental operations.
You can wake up your phone by turning on the display
and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a face verification, a fingerprint, an unlock
pattern, a PIN or a password for your phone, you’ll need
to use your face or fingerprint, draw the pattern, or enter
the PIN/password to unlock your screen.

9
Product Safety Information
Don’t make or receive phone calls while
driving. Never text while driving.
Keep your phone at least 5 mm away from
your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
T
o prevent possible hearing damage, do not
listen at high volume levels for long periods.
Exercise caution when holding your phone
near
y
our ear while the loudspeaker is in use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other
electronic medical devices.
Turn off when asked to in hospitals and
medical facilities.
Turn off when told to on aircraft and at
airports.
Turn off when near explosive materials or
liquids.
Don’t use at gas stations.
Your phone may produce a bright or flashing
light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.

10
Avoid contact with liquids. Keep your phone
dry.
Do not attempt to disassemble your phone.
Only use approved accessories.
For pluggable equipment, the socket-outlet
shall be installed near the equipment and
shall be easily accessible.
Don’t rely on your phone as a primary device
for emergency communications.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent
scientific organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the head was 0.214 W/kg*,
and when tested at the body was 1.625 W/kg* with 5 mm
distance. As mobile devices offer a range of functions,
they can be used in other positions, such as on the body
as described in the user manual**.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is
due to automatic changes to the power level of the
device to ensure it only uses the minimum power
required to communicate with the network.

11
* The tests are carried out in accordance with EN 50360,
EN 50566, EN 50663, EN 62209-1 and EN 62209-2.
** Please see body worn operation in the user manual.
Specification
EUT tested
radios
application
GSM900/1800
WCDMA Band 1,8
FDD LTE Band 1,3,7,8,20,28
TDD LTE Band 38,40
802.11b/g/n
Bluetooth V5.0+EDR/LE
GPS
WCDMA Version Rel.9
LTE Version Rel.12
Maximum RF
output power
GSM900: 33.7 dBm
GSM1800: 29.94 dBm
WCDMA Band 1: 24.4 dBm
WCDMA Band 8: 24.1 dBm
FDD LTE Band 1: 24.4 dBm
FDD LTE Band 3: 24.7 dBm
FDD LTE Band 7: 23.7 dBm
FDD LTE Band 8: 24.9 dBm
FDD LTE Band 20: 24.8 dBm
FDD LTE Band 28: 24.3 dBm
TDD LTE Band 38: 24.3 dBm
TDD LTE Band 40: 24.3 dBm
802.11b/g/n: 15.79 dBm
Bluetooth EDR: 3.53 dBm
Bluetooth LE: 5.95 dBm
GPS(RX Only)

12
CE Caution
Battery Caution
•There is a risk of explosion if battery is replaced by
an incorrect type.
•Dispose of used batteries according to the
instructions.
•Do not dispose of a battery into fire or a hot oven,
or mechanically crush or cut a battery. Doing so can
result in an explosion.
•Leaving a battery in an extremely high temperature
surrounding environment can result in an explosion
or the leakage of flammable liquid or gas.
•A battery subjected to extremely low air pressure
may result in an explosion or the leakage of
flammable liquid or gas.
USB Port
This product shall only be connected to a USB interface
of version USB 2.0.
Proper Use
As described in this guide, your device can be used only
in right location. If possible, please do not touch the
antenna area on your device.
Do not expose your device to extreme temperatures
lower than -10 °C and higher than + 45 °C.

13
Disposal of Your Old Appliance
1. When this crossed-out wheeled bin
symbol is attached to a product, it
means the product is covered by
the European Directive 2012/19/EU.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3. The correct disposal of your old
appliance will help prevent
potential negative consequences
for the environment and human
health.
For this product’s recycling information based on WEEE
directive, please send an e-mail to [email protected]

14
EU DECLARATION OF CONFORMITY
Hereby, ZTE Corporation declares that the radio
equipment type ZTE A7030 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following Internet address:
https://certification.ztedevices.com
ErP Conformity
The external power supply of this product conforms to
the Energy-related Product Directive (ErP) 2009/125/EC
of the European Parliament and the Council.
The detailed ErP information is available on ZTE website
https://certification.ztedevices.com.

15
ZTE Blade A71
Kurzanleitung

16
RECHTLICHE INFORMATIONEN
Copyright © 2021 ZTE CORPORATION.
Alle Rechte vorbehalten.
Dieses Benutzerhandbuch darf ohne die vorherige
schriftliche Zustimmung der ZTE Corporation weder
ganz noch in Auszügen zitiert, vervielfältigt, übersetzt
oder in jedweder Form und unter Verwendung jedweder
Mittel, seien es elektronische oder mechanische,
inklusive der Erstellung von Fotokopien und
Mikrofilmen, verwendet werden.
Hinweis
Die ZTE Corporation behält sich das Recht vor,
Druckfehler und technische Änderungen in dieser
Anleitung ohne Vorankündigung zu korrigieren oder zu
aktualisieren.
Für kundige Anwender bieten wir auch die Möglichkeit
der selbstständigen Fehlerbehebung an. Besuchen Sie
die offizielle ZTE-Website (unter www.ztedevices.com)
für weitere Informationen zur selbstständigen
Fehlerbehebung sowie zu den hierfür unterstützten
Produktmodellen. Informationen auf der Website haben
Vorrang vor denen in diesem Dokument.
Besuchen Sie https://www.ztedevices.com zum
Herunterladen des Benutzerhandbuches. Klicken Sie auf
der Startseite einfach auf Support und wählen Sie
anschließend Ihren Standort, den Produkttyp und den
Produktnamen, um die jeweiligen Supportinformationen
zu finden.
Haftungsausschluss
Die ZTE Corporation übernimmt keine Haftung für
Fehler und Schäden, die durch nicht autorisierte
Veränderungen an der Software verursacht werden.
Die in dieser Anleitung verwendeten Bilder und
Screenshots können vom tatsächlichen Produkt
abweichen. Inhalte in diesem Handbuch können vom
tatsächlichen Produkt oder der Software abweichen.
Eingetragene Marken
ZTE und die ZTE-Logos sind eingetragene Warenzeichen
der ZTE Corporation.
Android™ ist eine Marke von Google LLC.

17
Die eingetragene Marke Bluetooth®und die Logos sind
Eigentum der Bluetooth SIG, Inc. und jegliche Nutzung
dieser Marken durch die ZTE Corporation ist lizenziert.
Das microSDXC-Logo ist eine Marke von SD-
3C, LLC.
Sonstige eingetragene Warenzeichen und
Handelsnamen sind Eigentum ihrer jeweiligen Inhaber.
Version-Nr.: R1.0
Bearbeitung: 5. Februar 2021

18
Erstes Kennenlernen des Telefons
Frontkamera
Berührungs-
empfindlicher
Bildschirm
Hörer
Lautstärketaste
Ein/Aus-
T
aste/
Fingerabdruck-
Sensor
Lade-
/
Typ C-
USB-Anschluss
Kopfhörer-
Anschluss
Rückseitige
Kameras und
Blitz
Lautsprecher
Anzeigelämpchen
nano-SIM
/
microSDXC-
Kartenfach
Näherungs- und
Lichtsensor