3-form SimpleSpec 200.37-Edge User manual

For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
Installation Manual
Ready To Go
SimpleSpec 200.37Edgetm

Contents Overview
=+
Cable Coupler
with Cover Plate
3151639
(2)
M8 Thread
Rod, 25mm
3151754
(2)
(2)
Cable Coupler
3-15-1639-K
(9)
M6 × 18 Bolt
37-19
(6)
Edge Holder
37-15
(6)
M6×6mm
Set Screw
370-21
(4) =
Suspend Anchoring KIT
3-15-7000-K
+ +
M8 Threaded
Wood Insert
3150791
(4)
M8 Concrete
Anchor
3153011A
(4)
M8 Threaded
Rod, 50mm
3153032A
(4) +
M8 Thread
Rod, 25mm
3151754
(4)
M8 Toggle
Bolt Anchor
3150734
(4) +
(8)
Fin
(2)
Installation Stands
(3)
Rail
White: 3-7-14
Light Wood Stain: 3-70-013
(2) = +
Cable Tensioner
315-138
(2)
M8 Threaded
Rod, 25mm
3151754
(2)
Cable Tensioner
3151636K
(3)
Mending Plate
37-7
(only for multiple modules)
(12)
Mending Plate Screw
37-8
(only for multiple modules)
(2)
3mm Cable
315-723
(9)
White Fast Caps
37-6
Rampa Screw
37-20
*Pre-installed in
Rail (3-70-014)
2
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

Overview
Designed to look the same as the edge wall and ceiling, but in a two-sided format. Please visit our website for more views of Edge
Partition. *Some images below show 2 modules/kits rather than just one in order to show the pattern detail better.
Edge Uniform (Partition)
Max Fin Depth 12" (305mm)
U.U.U.U.U.U.U.U.
Jagged (Partition)*
Max Fin Depth 16.5" (420mm)
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1
Diagonal (Partition)*
Max Fin Depth 16.5" (420mm)
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1
Fan (Partition)
Max Fin Depth 16.5" (420mm)
1.2.3.4.5.6.7.8
Angle (Partition)*
Max Fin Depth 16.5" (420mm)
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8
Hourglass (Partition)*
Max Fin Depth 16.5" (420mm)
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1
Stepped (Partition)
Max Fin Depth 12" (305mm)
1.2.3.4.5.6.7.8
Arc (Partition)*
Max Fin Depth 16.5" (420mm)
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8
Contour (Partition)
Max Fin Depth 16.5" (420mm)
1.2.3.4.5.6.7.8
Number Location on Fins
(Top Rail Slot)
3
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

Installation
Required Tools
Drill Drill Bits Level ToolTape Measure Screwdrivers
View from Side
1Set Up Installation Stands
2Install Edge Fins into Installation Stands
Follow proper in numbering sequence as noted on page 3. Drill ⅛" holes through "C" shaped rails to
hang the rails with cables.
3Drill Cable Holes in Rails
4
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

Installation
--
Bottom of Fin
*Orient predrilled
holes towards loor
4Insert Rails into the Fins
Insert the rails into the ins as shown. Then install bolts (37-19) into the rails in the pre-installed rampa inserts.
Bottom
of Fin
5Expand Rails to Lock Fins in Slots
After completing installation, the fast caps (37-6) can be used to cover up the bolts.
5
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

Installation
6Cable Couplers and Tensioners Position and Installation
*If anchoring in concrete follow Steps 6c-h, if anchoring in wood follow Steps 6i-j. Then continue with Steps 6k-p.
Drill Ø10mm hole, minimum 65mm
deep.
Remove drilling debris with a blowout
bulb or with compressed air.
With screw in anchor (315311A), use a
hammer to insert anchor.
d ec Concrete Installation
aWhen installing models end to end (meaning the ends of the ins are lining up) 3form recommends to leave a ½"  1" gap
between modules to avoid any aesthetic variation due to the ins not perfectly aligning caused by material or installation
variance.
Determine position for anchoring.
b
6
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

6Cable Couplers and Tensioners Position and Installation cont...
Installation
g hf
Place a washer under the screw head. Torque the screw to 15 Nm. Remove screw.
ji
Drill Ø⁄" (Ø11.1mm) hole, minimum
20mm deep.
Use an Allen wrench to install the M8
Threaded Insert (315-791).
Wood Installation
7
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

"
mm
--
k l m
3151639K
n po
3151636K
6Cable Couplers and Tensioners Position and Installation cont...
Installation
8
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

7Suspend Edge Module
a b c
3-70-021
3-70-015
Installation
8Cable Tensioner installation
a b c
d fe
9
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

Installation
9Connect Edge Module - Optional
a
b
3-70-008 (×4)
3-70-007
10
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
SimpleSpec 200.37Edgetm Installation Manual
Ready To Go

Play with Varia in a whole new way with Edge. The easy-to-
install, modular system comes in nine conigurations, and can
be customized to it any space – as a wall treatment, ceiling
element, or partition system.
Features and Beneits
• Many beautiful design options
• Extremely easy to assemble and disassemble
• Very tough and durable
Edges Fins have been independently tested and meet the
criteria for approved interior inishes and light transmitting
resin as described in the 2015 International Building Code®.
Flammability and Smoke Test Results
- Building Code Approvals
F
Self
Extinguishing
F
Flame Class
- HB
Pass


Pass


Edge
Pass F
Pass CC
Pass F
Pass
Not more toxic
than wood
Class B: -
≤
Pass
Class A: -
≤
Result
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Sola Felt
Material
ASTM D  Smoke Density
Test
ASTM D  Flame Spread
ASTM D  Self-ignition
UL
UPITT Mortality Test
ASTM E-
Flame Spread, /" thickness
Smoke Generated
NFPA /" thickness
ASTM E-
Flame Spread, /" thickness
Smoke Generated
Available Textures/Finishes
3form Edge in Varia Ecoresin comes standard with both a
front and back Sandstone inish. Sandstone is a durable inish
that has a subtle grainy texture with a slightly frosted look.
*The Varia Ecoresin system panels utilizing natural products
as a decorative inter-layers may change in appearance over
time. Natural materials are also subject to inherent inconsis-
tency in color, texture and shape.
Panel Sizes and Tolerances
Linear patterns in Varia Ecoresin panels have a skew tolerance
of ¼" skew over 48". Panels containing a pattern (Capiz,
Timber, etc.) will not match up from piece to piece.
*Edge materials are cut to a tolerance of ±⅓"
Flatness Tolerance
Edge panels shall not have distortion in the form of a wrinkle,
twist or scallop along the perimeter of the sheet. Overall warp
extending across the sheet is permitted to a maximum of ⁄"
(7.14 mm) for each 48" (1.2 m) or fraction thereof. Panel is to be
measured when laying horizontally under its own weight on a
lat continuous surface.
Edge Fins come in 9 standard conigurations – Uniform, Con-
tour, Fan, Stepped, Angle, Arc, Diagonal, Jagged, Hourglass
(shown in more detail on page 3). Fins can be installed in
various sequences to provide a unique aesthetic within each
coniguration. Also, customization of the in size is available.
Edge is available as a wall, ceiling, or partition installation.
Each of the nine in conigurations are identical for wall and
ceiling. Partition is two sided so the look is similar on both
sides.
Available Conigurations
Edge Fins can be speciied in any of 3form’s 15 Sola Felt options.
Available Colors
AriesAdmiral Armor Cast
DuneDriftwood EbonyDusk
Jasper Mineral NightfallNickel
Citrine
Emerald
Zinc
Product Description
Material Speciications
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
Spec Sheet
Ready To Go
SimpleSpec 200.37Edgetm

Cleaning: Varia Ecoresin
3form Varia Ecoresin ins should be cleaned periodically. A
regular, seasonal cleaning program will dramatically help
prevent noticeable weathering and dirt build-up. 3form
recommends the use of the following common cleaning
products: Windex, Formula 409, Simple Green, Fantastik,
Virex, 10:1 Water/Bleach Solution.
Rinse the sheets with lukewarm water. Remove dust and
dirt from Varia Ecoresin with a soft cloth or sponge and a
solution of mild soap and/or liquid detergent in water. A 50:50
solution of isopropyl alcohol and water also works well. Rinse
thoroughly with lukewarm water.
Do:
• Always use a soft, damp cloth to blot dry. (Rubbing with
a dry cloth can scratch the material and create a static
charge)
Do not:
• Use scrapers or squeegees on Varia Ecoresin.
• Use scouring compounds, gasoline, benzene, acetone,
carbon tetrachloride, certain deicing luids, lacquer
thinner or other strong solvents.
• Use highly alkaline or abrasive cleaning agents.
• Rub with a dry cloth.
Cleaning: Felt
To remove airborne debris and dust, it is recommended to
periodically vacuum Felt Edge ins. Please note the slight
shedding of ibers from the Felt is normal and not indicative of
any defect.
Important! If a cleaning material is found to be incompatible
in a short-term test, it will usually be found to be incompatible
in the ield. The converse, however, is not always true.
Favorable performance is no guarantee that actual end-use
conditions have been duplicated. Therefore, these results
should be used as a guide only and it is recommended that
the user test the products under actual end use conditions.
Usage Limitations
Do not use cyanoacrylate or solvent type thread locking
materials with Varia Ecoresin. To more permanently secure
hardware, use the recommended products from the 3form
Adhesives Matrix.
Edge Sealing (Varia Ecoresin Only)
Certain Varia Ecoresin designed layers (organics, papers and
fabrics in particular) can wick moisture over time if the edges
become wet and are not adequately sealed. These Varia
Ecoresin products should not be exposed to water or wet
conditions without irst applying an approved edge sealing
treatment.
Panel Weight
 lb/ft kg/m
Weight Flux
 lb/ft kg/m
Material
Varia Ecoresin
Sola Felt
/" mm
Thickness
/" mm
Acoustic Rating
N/A
SAA

Material
Varia Ecoresin
Sola Felt
N/A
NRC

N/A
Alpha-W
.
Material Speciications cont... Cleaning Instructions
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2020 | MANRTG20037 | REV 003 © 2020 3form, Inc. All rights reserved.
Spec Sheet
Ready To Go
SimpleSpec 200.37Edgetm