3M PL300 User manual

Portable Labeler
PL300
Quick Reference Guide
manufactured by:
Wire Labels
Panel Labels
Terminal Block Labels
General Purpose labels

1. Press
2. Select wire type: COAX, press
3. Enter text
4. Press
Vertical Wrap

Wire Labels
1. Press +
2. Select label length: AUTO, press
3. Enter text
4. Press
Horizontal Wrap

1. Press
2. Select flag length: AUTO, press
3. Press
4. Select VOICE/DATA, press
5. Press L, select LAN, press
6. Press
Flag

1. Press +
2. Select label length: AUTO, press
3. Type text
4. Press
Self-Laminating

1. Press
2. Set number of blocks, block size, select DONE,
press
3. Type text
4. Press + to move to next breaker label
5. Enter text
6. Repeat steps 4 – 5 until all breakers are labeled
7. Press
Electrical Panel

Panel Labels
1. Press
2. Set port distance, number of ports, select DONE,
press
3. Type text
4. Press
5. Select 1to be serialized, press
6. Set increment, number of serializations,
press , select DONE, press
7. Press select ALL
Patch Panel

1. Create a Patch Panel.
(see Patch Panel steps 1 – 6 on page 7)
2. Press +
3. Set number of copies
7. Press
Back of Patch Panel (#1)

1. Press
2. Set port distance, number of ports, select DONE,
press
3. Enter text
4. Press +
5. Select SIMULTANEOUS, press
6. Select 1to be the first character to be serialized,
press
7. Select 2to be the second character to be
serialized, press
8. Set increment, number of serializations, press
9. Press +
Back of Patch Panel (#2)
10. Set number of copies, press

1. Press
2. Set port distance, number of ports, select DONE,
press
3. Enter text
4. Press + one time to move to the next connector
5. Repeat steps 3 –4 until first three ports are labeled
6. Press + , select insert next label to the right,
press
7. Repeat steps 3 – 6 until all ports are labeled
8. Press select ALL
A/V Distribution Panel