3M Dynatel 965AMS User manual

October 2007
78-8135-7673-9
Future-Proof Testing Platform
3
Dynatel™Advanced Modular System
965AMS VDSL2 Service Module
User’s Guide


3
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
Contents
VDSL2 Service Module ....................................................................5
Introduction...............................................................................................5
Module Installation ...................................................................................6
RJ-45 Adapter Installation ........................................................................8
Network Setups ...............................................................................9
ATM Transport Setup................................................................................9
WAN Setup .............................................................................................12
LAN Setup ..............................................................................................17
Ping Setup ...............................................................................................20
xDSL Functions..............................................................................23
Details (xDSL)........................................................................................23
RJ-45 Functions.............................................................................31
Details (RJ-45)........................................................................................31
Tests ...............................................................................................35
Ping .........................................................................................................37
Browser ...................................................................................................38
Thru Mode......................................................................................40
Contact 3M.....................................................................................44

4
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide

5
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
VDSL2 Service Module
Introduction
The VDSL2 Service Module is used with the 3M™ Dynatel™
Advanced Modular System 965AMS to test and troubleshoot
both xDSL circuits and ethernet networks.
DSLAM
DSL
Modem
Computer
Test Leads or
RJ-11 Adapter
RJ-45 Adapter
When testing xDSL circuits, the tester can be connected using
either the regular test leads, or with the RJ-11 adapter.
Ethernet networks are only connected through the RJ-45 adapter.
V
?
AΩ
TOOLS OPEN
USER
1
0#
*
2 3
4 5 6
7 8 9
MOD.
ins
SAVE
ESC
TONE
RFL DSL TDR
POTS AUTO DIAL
F1 F2 F3 F4 F5
del
abc def
jklghi mno
tuvpqrs wxyz
Test Leads RJ-11 (black) or
RJ-45 (blue) Adapter

6
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
Introduction
The VDSL+ module includes web browser and ping functions
which can be used with either a DSL or ethernet connection.
The tester can also be used in place of a DSL modem to connect
a computer to the internet (Thru Mode).
DSLAM
Computer
Module Installation
1. The 3M™Dynatel™Advanced Modular System 965AMS
VDSL2 Service Module is designed to be installed in the
3M™Dynatel™Advanced Modular System 965AMS base
unit.
2. Press and hold the red key for 10 seconds, then release
to power down the unit.
3. Place the tester face down on a soft surface.

7
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
Module Installation
4. Loosen the captured screws on the blank module or other
service module.
5. Remove the blank module or other service module.

8
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
Module Installation
6. Position the new module over the screw holes and hand-tighten
the screws. (The VDSL2 module uses only 2 screws.)
Due to the high power dissipation of the modem in the VDSL2
module, the internal temperature of the module is monitored.
When the internal temperature reaches a value that is near the
upper temperature limit of the components in the module, the
module is shut down and a warning message is displayed to the
user. At that point the user should let the unit cool down for 15
to 30 minutes before retrying the measurement. The following
approximate operating times apply:
• At less than 45°C (113°F) the module should operate indefinitely.
• At 50°C (122°F), the temperature limit may be reached after
the module is on and connected for approximately 75 minutes.
• At 60°C (140°F), the temperature limit may be reached after
the module is on and connected for approximately 25 minutes.
RJ-45 Adapter Installation
1. Connect the RJ-45 adapter cable to the connector on the
service module.
2. Connect your RJ-45 or RJ-11 network cable to the adapter.

9
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
Network Setups
To access all the functions of the 3M™Dynatel™Advanced
Modular System 965AMS VDSL2 Service Module, you must
complete 4 network setups:, LAN Setup, WAN Setup, Ping Setup
and ATM Transport Setup.
ATM Transport Setup
Note: The xDSL and RJ-45
Details functions only
require the ATM Transport
Setup.
1. Press the red key to
power up the tester. When
the unit wakes up, press
the blue key to use the
service module.
2. If the “Wrong Module
Selected” message appears,
use the up and down arrow
keys to select VDSL2 from
the list. Press OK .

10
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
ATM Transport Setup
3. Press to return to the
previous screen.
4. Press Setup to view the
Network Setups screen.
5. Use the up and down
arrows to select ATM
Transport Setup, then
press Edit .

11
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
ATM Transport Setup
6. Use the up and down arrow
keys to select LLCSNAP
(Logical Link Control/Sub-
Network Access Protocol)
or VCMUX (Virtual
Channel Multiplexing).
7. Press Select to highlight
the VPI (Virtual Path
Identifier).
8. Use the blue keys to enter
the VPI.
9. Press Select to highlight
the VCI (Virtual Channel
Identifier).

12
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
ATM Transport Setup
10. Use the blue keys to enter
the VCI.
11. Press OK or to see
previous screens. Multiple
presses will take you to the
Network Setup screen.
WAN Setup
The VDSL2 Service Module can be configured for four different
transport types: EoA (Ethernet over ATM), IPoA (Internet
Protocol over ATM), PPPoE (Point to Point Protocol over
Ethernet) and PPPoA (Point to Point Protocol over ATM).
PPPoE & PPPoA require a username and password.
The module can also use two different address modes: DHCP
and Static IP. Static IP requires entering the local IP, subnet
mask and default gateway information.

13
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
WAN Setup>Transport Type
1. Use the up and down arrow
keys to select WAN Setup,
then press Edit .
2. Use the up and down
arrow keys to choose
the Transport Type. The
choices include:
EoA
PPPoE
IPoA
PPPoA
3. If you choose EoA or IPoA,
press Select and go to WAN
Setup>Address Mode on
page 15.
4. If you choose PPPoE or
PPPoA, press Select and
use the up and down arrow
keys to select the mode,
then press Setup PPPOE or
Setup PPPOA .

14
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
WAN Setup>Transport Type
5. Use the blue keys to enter
the complete Username.
The Username can
be a maximum of 63
alphanumeric characters.
Use the blue key to
enter the characters star,
period,or comma. Use the
blue key to use the keys
#, @ or $.
6. Press Select to highlight
the Password.
7. Use the blue keys to enter
the Password
The Password can
be a maximum of 63
alphanumeric characters.
8. Press Select to choose the
Protocol.

15
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
WAN Setup>Transport Type
9. Use the up and down arrow
keys to select a protocol.
The choices are PAP or
CHAP.
10. Press OK or to return
to the WAN Setup screen.
WAN Setup>Address Mode
1. Press Select to highlight
Address Mode.
2. Use the up and down arrow
keys to select DHCP or
Static IP.
3. If you choose Static IP,
press Setup IP , otherwise
press OK and go to LAN
Setup on page 17.

16
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
WAN Setup>Address Mode
4. Use the blue keys to enter
the local IP.
Note: The “ . ” character is
located under the Dial key.
5. Press Select to highlight
the Subnet Mask.
6. Use the blue keys to enter
the Subnet Mask.
7. Press Select to highlight
the Default Gateway.

17
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
WAN Setup>Address Mode
8. Use the blue keys to enter
the Default Gateway.
9. Press OK or to return
to the WAN Setup screen.
10. Press OK or to return
to the Network Setups
screen.
LAN Setup
1. Use the up and down arrow
keys to select LAN Setup,
then press Edit .
Note: The LAN setup is
required if you want to use
Thru-Mode.

18
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
LAN Setup
2. Use the up and down arrow
keys to highlight Modem or
Ethernet, then press Select .
3. Use the up and down arrow
keys to highlight DHCP or
Static.
If you choose Static, press
Static Setups to enter the
LAN IP.
Otherwise, press OK or
to see previous screens.
Multiple presses will take
you to the Network Setups
screen.

19
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
LAN Setup
4. Use the blue keys to enter
the local IP, or use the
default IP.
5. Press Select to enter your
Subnet Mask.
6. Use the blue keys to enter
the Subnet Mask, or use the
default Subnet Mask.
7. Press Select to enter your
DNS Server.

20
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
LAN Setup
8. Use the blue keys to enter
the DNS Server address, or
use the default address.
7. Press OK or to see
previous screens. Multiple
presses will take you to the
Network Setups screen.
Ping Setup
Note: Ping setup is only
required to use the Ping
function.
1. Use the up and down arrow
keys to select Ping Setup,
then press Edit .
Other manuals for Dynatel 965AMS
2
Table of contents
Other 3M Measuring Instrument manuals

3M
3M PL300 User manual

3M
3M Charge Analyzer 711 User manual

3M
3M CTM048 User manual

3M
3M 1100 SLM User manual

3M
3M PROTEGE PLUS Instruction Manual

3M
3M SE-400 Series User manual

3M
3M Clean-Trace NGi Luminometer User manual

3M
3M Dynatel 2250M User manual

3M
3M Clean-Trace NGi Luminometer User manual

3M
3M Workstation Monitor 724 User manual
Popular Measuring Instrument manuals by other brands

Anritsu
Anritsu Spectrum Master MS2712E user guide

Endress+Hauser
Endress+Hauser Proline Promass 300 Special Documentation

Anritsu
Anritsu Field Master Pro MS2090A Measurement guide

Sphere
Sphere Mata 1 product manual

Honeywell
Honeywell VERSAFLOW SONIC 2000 Short guide

Sigma
Sigma 980 Operating and maintenance manual