Aaeon AMB-2000HT-E Series User manual

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.41
AMB-2000HT(T)-E
10.4” Fan-less
Industrial Panel PC

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.42
Copyright Notice
This document is copyrighted, 2003. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products
described in this manual at any timewithout notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the
original manufacturer. Information provided in this manual is intended to be
accurate and reliable. However, the original manufacturer assumes no respon-
sibility for its use, nor for any infringements upon the rights of third parties,
which may result from its use.
The material is this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the
preparation of this document to assure its accuracy, AAEON, assumes no
liabilities resulting from errors or omissions in this document, or from the use
of the information contained herein.
AAEON reserves the right to make changes in the product design without
notice to its users.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.43
Acknowledgments
Intel and Pentium are registered trademarks of Intel®Corporation.
IBM, PC/AT, PS/2 are trademarks of International Business Machines
Corporation.
Microsoft Windows is a registered trademark of Microsoft Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
Winbond is a trademark of Winbond Electronic Corporation.
AD is a trademark ofAnalog Device, Inc.
Geode is a trademark ofNational System Technology, Inc.
All other product names or trademarks are properties of their respective
owners.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.44
Packing List
Before installing yourPanel PC, pleasecheck if the package contains
the following items.
nAMB-2000HT(T)-E series Panel PC
nCD-ROM
Contains User’s Manual, Drivers and Utilities
nAccessories
-Water-proof sponge
-Mounting brackets
-Simple-equipped stand
-Power cord (1.8M)
-Anti-vibration HDD kit
ØMetal box top cover with sponge
ØMetal box bottom cover with sponge
ØHDD IDE cable
ØM3*6mm screws x 4
ØSilica gel x 4
If any of these items are missing or damaged, you should contact your
distributor or sales representative immediately.
CompactFlash: Turn off power before inserting
or removing CompactFlash storage card.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.45
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual forlater reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or
letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting
the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could causefire or electrical
shock.
13. Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.46
14. If any of the following situations arises, get the equipment checked by
service personnel:
a. The power cord orplug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY DAMAGE
THE EQUIPMENT.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.47
Contents
Copyright Notice................................................................2
Acknowledgments..............................................................3
Packing List........................................................................4
Safety & Warranty..............................................................5
General Information...................................................................9
Introductions ....................................................................10
Features:...........................................................................11
Specifications:..................................................................12
Dimensions.......................................................................15
Panel Mounting................................................................16
Waterproof Sponge Position............................................17
Simple-equipped Stand Installation.................................19
Hardware Installation...............................................................20
Installing 2.5” HDD .........................................................21
How to connect Adjustment Panel...................................25
Jumper Settings........................................................................26
Safety precautions............................................................27
CPU Card MBC-5410-Jumper Setting ...........................28
BIOS Installation......................................................................38
System test and initialization...........................................39
Award BIOS setup............................................................40
Standard CMOS Features.................................................42
BIOS Features Setup ........................................................43
Chipset Features Setup.....................................................44

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.48
Power management setup.................................................45
Load BIOS Defaults.........................................................47
Load Setup Defaults.........................................................47
Integrated Peripherals ......................................................48
Set Supervisor Password..................................................49
IDE HDD Auto Detection................................................50
Save & Exit setup.............................................................51
Exit without saving ..........................................................51
Drivers Installation...................................................................52

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.49
General
Information
Chapter
1

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.410
Introductions
The AMB-2000HT(T)-E series fan less modular system panel PC, are
PC-based industrial computers that are designed to serve as a Human Machine
Interface. They are full-function PC-based systems with a 10.4" VGA (640 x
480) color TFT hi-brightness, long-life time LCD displays and works with
different control modules via a 50-pin cable. The compact dimensions are ideal
for automation applications when the installation space is critical or application
environmental is fan less requirement. These PCs are characterized by their
space saving, fan less solution, flexible selection of control boxes.
AMB-2000HT(T)-E series have a heavy-duty steel chassis with optional
aluminum front panel, which meets the toughest industrial and environmental
standards.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.411
Features:
l10.4” VGA (640 x 480) color TFT LCD display
lHeavy-duty steel chassis and IP-65 certified aluminum front panel
lFanless solution: All-in-one SBC with onboard NS Geode GX1
300MHz CPU (BGA)
lThree 16C550 (RS-232C) ports, one 16C550 (RS-232C) port can be set
as RS-422/RS-485 also
lDiskOnChip –2000 flash disk socket
l16-bit stereo digital audio
lAnti-Vibration 2.5” Hard Disk bay
lSupport Compact Flash Type II slot
lVESA75/100mm standard screw holes
lRotatable mounting mechanism (optional)
lResistive touchscreen (optional)

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.412
Specifications:
-Construction: Heavy-duty steel chassis and aluminum alloy front panel
-Display: 10.4” VGA (640 x 480) color TFT LCD
-CPU:Onboard NS Geode 300MHz
-Memory: Supports up to 256MB (Only 1Slot)
-Network (LAN):10/100 Base-TX Ethernet port
-I/O ports:
3 external serial ports, 1 Internal serial Header
(COM2 can choose RS-232/RS-422/RS-485, COM4 is reserved
for touchscreen)
1 parallel port (supports EPP/ ECP)
1 PS/2 keyboard and mouse interface
Mic in/ Line in/ Line out
-Disk Drive Housing: 2.5” HDD
-USB connector: 2 USB ports
-Mounting: Panel Mount, Rear mount
Optional: Standard mount frame, Handle mount, Swivel ARM, Wall
mount kit
-Expansion slots: One Type II CompactFlashTM
-Power supply: Universal 70W switching power supply
-OS support: MS DOS, Windows 98/SE, Windows NT4.0, Windows
CE.NET (optional)
-Dimension (W x H x D): 326 x 251 x 109.7mm (12.8” x 10” x 4.3”)
-Carton Dimension (W x H x D): 460 x 380 x 301mm (18” x 14.9” x
11.8”)
-Gross Weight: 6.5Kg (14.3lbs) with bezel

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.413
LCD Specifications
Display type 10.4” color TFT LCD
Max. Resolution 640 x 480
Max. Colors 256K
Dot size (mm) 0.33 x 0.33
Luminance (cd/m2)250 (TYP.)
80°(H)
Viewing angle 45°(V)
Operating temperature 0o ~ 45℃(32~113℉)
Note: All AAEON's LCD products are manufactured with High precision
technology. However, in all LCD panels there maybe a small number of
defective pixels that do not change color. This is a normal occurrence for
all LCD displays from all manufacturers and should not be noticeable or
objectionable under normal operation. AAEON qualify theLCD panel
following industry standard: Total 7 dead pixels on a screen or if there are
3 within 1 inch square area of each other on the display.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.414
Power Supply
-Input Voltage: 85 ~ 270V AC
24V DC Input 70W (optional)
-Input Voltage: 10 ~ 30V DC
Environmental Specification
-Operating temperature:0℃to 45℃(30 ~ 113℉)
-Storage temperature: -20℃to 60℃(-4 ~ 149℉)
-Storage humidity:10 to 95%@ 40℃, non-condensing
-Vibration:1G/ 5 ~ 500Hz/ operation
-Shock: 15G peak acceleration (11 msec. Duration)
-EMC: CE/ FCC Class A
Touchscreen (optional)
Type:8-wire, analog resistive
Resolution: 1024 x 1024
Light transmission: 76%±2%
Lifetime: 1 million activations
Controller:RS-232

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.415
Dimensions
342
267
Chassis Cutout size : 309 x 231 mm
AMB-2000-E 298
306
30
251
100
170
70.5
70.5
7373 326
109.7
174
220 228
Front Bezel Size
LCD Cutout size : 216 x 163 mm
Unit: mm

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.416
Panel Mounting
These display panels can be placed on a shelf or table, or mountedonto the
wall. To mount them ontothe wall, you needthe mounting brackets, which
you will find in the accessory box. Follow the steps described below:
1. Slide the display panel onto the wall
2. Tighten the brackets until the display panel is firmly secured to the
wall。
**The above picture is ONLY to illustrate the Panel mounting and may
not contain the right product.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.417
Waterproof Sponge Position
Inner sponge (the smaller one):
a. Tear off the protection paper on the self-adhesive side ofthe inside
sponge.
b. Stick the sponge on the recessed area of the Aluminum bezel or
customer’s own bezel.
Adhesive Inner Sponge
Front Bezel
Back Side

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.418
Outer sponge：
Press to close the outer sponge to the edge of the Panel PC.
Sponge with adhesive
Front Bezel
Outer Sponge

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.419
Simple-equipped Stand Installation
Simple-equipped stand is the bracket belowwhich is provided to fix
in the back of the display with screws.

Fan-less Panel PCs AMB-2000HT(T)-E
AMB-2000HT(T)-E Series User Manual V1.420
Hardware
Installation
Chapter
2