ABB Welcome IP H81381P Series User manual

2TMD041800D0010 │30.03.2019
Product manual
ABB-Welcome IP
H81381P.-. IP pushbutton outdoor
station
H81381P.-.-02 IP pushbutton outdoor
station

Table of contents
Product manual 2TMD041800D0010 │
2
Tableo fcontents
1 Notes on the instruction manual....................................................................................................................3
2 Safety.............................................................................................................................................................3
3 Intended use..................................................................................................................................................4
4 Environment...................................................................................................................................................5
4.1 ABB devices.......................................................................................................................................5
5 Product description........................................................................................................................................6
5.1 Control elements................................................................................................................................6
5.2 Interfaces............................................................................................................................................7
5.3 Locks and connections ......................................................................................................................8
6 Technical data ...............................................................................................................................................9
7 Mounting/Installation....................................................................................................................................10
7.1 Requirement for the electrician........................................................................................................10
7.2 Mounting...........................................................................................................................................11
7.2.1 Preparation.....................................................................................................................................11
7.2.2 Wiring..............................................................................................................................................11
7.2.3 Surface-mounted installation..........................................................................................................12
7.2.4 Flush-mounted installation .............................................................................................................12
7.2.5 Cavity wall installation ....................................................................................................................14
7.2.6 Dismantling.....................................................................................................................................15
7.2.7 Replacing the nameplate................................................................................................................15
8 Commissioning............................................................................................................................................16
9 Operation.....................................................................................................................................................18
9.1 Calling a resident .............................................................................................................................18
9.2 Calling the guard unit.......................................................................................................................18
9.3 Turn on the light...............................................................................................................................19
10 FCC..............................................................................................................................................................20
11 Cyber security..............................................................................................................................................21
11.1 Disclaimer.........................................................................................................................................21
11.2 Performance and service.................................................................................................................21
11.3 Deployment guideline ......................................................................................................................22
11.4 Upgrading.........................................................................................................................................22
11.5 Backup/Restore................................................................................................................................22
11.6 Malware prevention solution............................................................................................................22
11.7 Password rule ..................................................................................................................................22

Notes on the instruction manual
Product manual 2TMD041800D0010 │
3
1 Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property, and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place. If you pass the device on, also pass on this manual
along with it. ABB accepts no liability for any failure to observe the instructions in this manual.
2 Safety
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!

Intended use
Product manual 2TMD041800D0010 │
4
3 Intended use
As part of the ABB-Welcome IP system, this device can only be used with accessories from that
system.
Security mode
This outdoor station runs in "Security mode" by default to guarantee high security.
In "Security mode", this outdoor station requires a certificate issued by the management
software before it can function normally.
Compatible mode
If there is no management software, this outdoor station needs to run in "Compatible mode" to
function normally. This can be set on the indoor station. Please refer to the product manual for .
IP touch 7".
Video privacy
Video privacy
Making and saving video recordings can infringe on personal rights! Always
observe the applicable legal and labeling requirements for the placement and
operation of video components!

Environment
Product manual 2TMD041800D0010 │
5
4 Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household
waste.
– The device contains valuable raw materials that can be recycled. Therefore,
dispose of the device at the appropriate collecting facility.
4.1 ABB devices
All packaging materials and devices from ABB bear the markings and test seals for proper
disposal. Always dispose of the packing materials and electric devices and their components via
an authorized collection facility or disposal company.
ABB products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description
Product manual 2TMD041800D0010 │
6
5 Product description
5.1 Control elements
No. Function
1 Camera
2 Speaker and microphone integration
3 Round pushbutton
4 End strip
1
2
3
4

Product description
Product manual 2TMD041800D0010 │
7
5.2 Interfaces
No. Function
1 Reset button
2 Micro USB update connector
3 Plug-in clamps (DC+...GND) for standalone power supply
4 Plug-in clamps (LOCK...GND) for door opener
5 Plug-in clamps (COM...NC...NO) for floating output, door opener
6 LAN (PoE)
7 Connector for next module
8 Connector for exit button
9 Connector for the sensor used for door status detection
10 Connector for 5" display module
11 Connector for previous module
7
11
1
2 3
4
5
6
7
8
9
10

Product description
Product manual 2TMD041800D0010 │
8
5.3 Locks and connections
Lock type Pic Operation type Voltage Wiring type
Electrical strike
lock, 12V Power on to open 12 VDC/AC Type A
Type B
Electrical strike
lock, 24V Power on to open 24 VDC/AC Type B
Electrical rim
lock, 12 V Power on to open 12 VDC Type A
Type B
Electrical
mortise lock Power off to open 12 VDC Type C
Magnetic lock Power off to open 12/24 V
DC Type C

Technical data
Product manual 2TMD041800D0010 │
9
6 Technical data
Designation Value
Rating voltage 24 V DC
Operating voltage range 20-27 V DC
Rating current 27 V DC, 300 mA
24 V DC, 330 mA
Operating temperature -40 °C…+55 °C
Product dimensions 135mm x 276.9 mm × 17.6 mm
Camera type CMOS
Camera viewing angle 130°
Resolution ratio HD (1280 x 720 pixel)
Power supply for door opener 18 V, 4 A impulse, max. 250 mA holding
Floating output for door opener 230 V AC, 3 A
30 V DC, 3 A
Video codec H.264
Audio codec G.711
IP level IP 54
IK level IK 07
Network connection standard IEEE 802.3, 10Base-T/100Base-TX, auto MDI/MDI-X

Mounting/Installation
Product manual 2TMD041800D0010 │
10
7 Mounting/Installation
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
7.1 Requirement for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
– Incorrect installation endangers your life and that of the user of the electrical
system.
– Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
– Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
– Use suitable personal protective clothing.
– Use only suitable tools and measuring devices.
– Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).

Mounting/Installation
Product manual 2TMD041800D0010 │
11
7.2 Mounting
7.2.1 Preparation
Use gloves to protect yourself against cuts.
7.2.2 Wiring

Mounting/Installation
Product manual 2TMD041800D0010 │
12
7.2.3 Surface-mounted installation
7.2.4 Flush-mounted installation
1. Flush-mounted without pre-installation box
3
4
5
6
78
2
1
32 mm
40 mm
71 mm
211 mm
1X3
2
1
3
117 mm 46 mm
2
6
4
m
m
1X3
4
5
6
7
89

Mounting/Installation
Product manual 2TMD041800D0010 │
13
2. Flush-mounted with pre-installation box
3
21
2
7
4
m
m
126 mm
68 mm
1X3
10
5
6
7
8
9
4

Mounting/Installation
Product manual 2TMD041800D0010 │
14
7.2.5 Cavity wall installation
1
23
4
10
5
6
7
8
9
6
5

Mounting/Installation
Product manual 2TMD041800D0010 │
15
7.2.6 Dismantling
7.2.7 Replacing the nameplate
Installation situations
Note
The following installation situations must be avoided without fail to ensure
picture quality:
■Direct light
■Direct sunlight
■Extremely bright picture background
■Highly reflective walls on the opposite side of the door station
■Lamps or direct light sources
1
2
3

Commissioning
Product manual 2TMD041800D0010 │
16
8 Commissioning
The outdoor station must be configured via the indoor station.
Step1: Outdoor station enters engineering mode
■Power on the outdoor station, wait a while until all 3 LED indicators go out.
■Hold the first button on the outdoor station for 10 s until all 3 LED indicators start to flash.
Tip
The outdoor station will quit engineering mode after 5 minutes.
Step 2: Indoor station enters engineering mode
On the extra screen on the indoor station, click "System" to enter the settings screen.

Commissioning
Product manual 2TMD041800D0010 │
17
On the "System settings" screen, click "Engineering settings", enter the engineering password
(default is 345678) to enter the settings page.
Step3: Indoor station configures outdoor station
On the "Engineering settings" screen, click "Outdoor station settings" to configure the outdoor
station.
Please refer to the product manual for the IP touch 7".

Operation
Product manual 2TMD041800D0010 │
18
9 Operation
9.1 Calling a resident
Press the button to start a call (default) and press again to restart the call.
9.2 Calling the guard unit
If the outdoor station has been configured via the indoor station, we can press the pushbutton to
call the designated guard unit. Please refer to the product manual for the IP touch 7".

Operation
Product manual 2TMD041800D0010 │
19
9.3 Turn on the light
If the outdoor station is configured by the indoor station, we can press the pushbutton to switch
on the light connected to the IP actuator. Please refer to the product manual for the IP touch 7".

FCC
Product manual 2TMD041800D0010 │
20
10 FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Only operate the device in accordance with the instructions supplied.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.