ADF Web HD67660-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 1 of 30
User Manual
Revision 1.000
En lish
PROFINET / EtherNet/IP Slave - Converter
(Order Code: HD67660-A1)
Benefits and Main Features:
Triple electrical isolation
Two Ethernet ports
Temperature ran e: -40°C/+85°C (-40°F/+185°F)

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 2 of 30
INDEX:
Pa e
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
POWER SUPPLY 7
FUNCTION MODES 8
LEDS 9
ETHERNET/IP 10
PROFINET 10
USE OF COMPOSITOR SW67660 11
NEW PROJECT / OPEN PROJECT 12
SOFTWARE OPTIONS 13
SET COMMUNICATION 14
PROFINET XML 15
UPDATE DEVICE 16
MECHANICAL DIMENSIONS 18
ORDERING INFORMATIONS 19
ACCESSORIES 19
PLC CONFIGURATION (for EtherNet/IP) 20
PLC CONFIGURATION (for PROFINET) 24
DISCLAIMER 29
OTHER REGULATIONS AND STANDARDS 29
WARRANTIES AND TECHNICAL SUPPORT 30
RETURN POLICY 30
PRODUCTS AND RELATED DOCUMENTS 30
Pagina 2 di 30
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the followin document is:
Updated;
Related to the product you own.
To obtain the most recently updated document, note the “document code”
that appears at the top ri ht-hand corner of each pa e of this document.
With this “Document Code” o to web pa e www.adfweb.com/download/
and search for the correspondin code on the pa e. Click on the proper
“Document Code” and download the updates.
To obtain the updated documentation for the product that you own, note
the “Document Code” (Abbreviated written "Doc. Code" on the label on
the product) and download the updated from our web site
www.adfweb.com/download/
REVISION LIST:
Revision Date Author Chapter Description
1.000 13/03/2014 Ff All First release version
WARNING:
ADFweb.com reserves the ri ht to chan e information in this manual
about our product without warnin .
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belon to their respective
owners.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 3 of 30
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated accordin to the instructions in the manual. When usin the device are required for
each individual application, le al and safety re ulation. The same applies also when usin accessories.
I NTENDED U SE
Machines and systems must be desi ned so the faulty conditions do not lead to a dan erous situation for the operator (i.e. independent limit
switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissionin and operation of this equipment and who
have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state of the art and is safe. The instrument can represent a potential hazard if they are inappropriately installed and operated
by personnel untrained. These instructions refer to residual risks with the followin symbol:
This symbol indicates that non-observance of the safety instructions is dan er for people to serious injury or death and / or the
possibility of dama e.
CE CONFORMITY
The declaration is made by us. You can send an email to or ive us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 4 of 30
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 5 of 30
CONNECTION SCHEME:
1 2
ON
OFF
Dip-Switch A:
-Dip1 – Must be at ON
-Dip2 – Functionin Mode
= Normal = Boot
1 2
ON
OFF
1 2
ON
OFF
+V 0V
Rail DIN
Clamp
Connector1:
Power Supply port
0V = Ground
+V = Positive wire
V AC: min 8V ; max 24V
V DC: min 12V ; max 35V
Connector4:
Ethernet2 port
(RJ45 Plu )
Led6:
Green
Ethernet2 Tx
Led5:
Green
Ethernet1 Tx
Connector3:
Ethernet1 port
(RJ45 Plu )
Led1:
Green
ON
Led2:
Yellow
MT
Led3:
Red
BF
Led4:
Red
SF
Figure
1
: Con
nection scheme for HD67
660
-
A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 6 of 30
CHARACTERISTICS:
The HD67660-A1 is a PROFINET / EtherNet/IP Converter.
It allows the followin characteristics:
Up to 500 bytes in readin and 500 bytes in writin on EtherNet/IP side;
Two-directional information between EtherNet/IP and PROFINET;
Mountable on 35mm Rail DIN;
Wide power supply input ran e: 8…24V AC or 12…35V DC;
Wide temperature ran e: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67660 software on your PC in order to perform the followin :
Define the parameter of the PROFINET;
Define the parameter of the Ethernet/IP.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 7 of 30
POWER SUPPLY:
The devices can be powered between a wide ran e of tensions. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
HD67660-A1 8V 24V 12V 35V
Consumption at 24V DC:
Device W/VA
HD67660-A1 4
Caution: Not reverse the polarity power
HD67660-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 8 of 30
FUNCTION MODES:
The device has ot two functions mode dependin of the position of the Dip2 of ‘Dip-Switch B’:
The first, with Dip2 in Off position (factory settin ), is used for the normal workin of the device.
The second, with Dip2 in On position, is used for upload the Project/Firmware.
For the operations to follow for the updatin (see ‘UPDATE DEVICE’ section).
Accordin to the functionin mode, the LEDs will have specifics functions (see ‘LEDS’ section).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 9 of 30
LEDS:
The device has ot six LEDs that are used to ive information of the functionin status.
The various meanin s of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply volta e ]
( reen)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: MT [maintenance display]
(yellow)
ON: Device not able to communicate with the Master
DeviceNet
OFF: No maintenance are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
3: BF [bus fault] (red)
ON: The Ethernet connection is defective; the IP
address exists several times in the network; the own
NameOfStation exists several times in the network; no
IP address has been set
Flashing: At least one confi ured AR is no lon er in
the data exchan e
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
4: SF [ roup error] (red) ON: At least one AR is not in the data exchan e
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
5: Ethernet1 Tx ( reen) Blinks when is transmittin Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
6: Ethernet2 Tx ( reen) Blinks when is transmittin Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 10 of 30
ETHERNET/IP:
The Ethernet connection must be made usin Connector3 or Connector4 of HD67660-A1 with at least a Cate ory 5E cable. The maximum
len th of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a strai ht cable, to connect the device to a PC/PLC/other is recommended
the use of a cross cable.
PROFINET:
The PROFINET connection must be made usin Connector3 or Connector4 of HD67660-A1 with at least a Cate ory 5E cable. The maximum
len th of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a strai ht cable, to connect the device to a PC/PLC/other is recommended
the use of a cross cable.
Connector4:
Ethernet2 port
(RJ45 Plu )
Connector3:
Ethernet1 port
(RJ45 Plu )

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 11 of 30
USE OF COMPOSITOR SW67660:
To confi ure the Converter, use the available software that runs with Windows called SW67660. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8; 32/64bit).
When launchin the SW67660, the window below appears (Fi . 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67660

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 12 of 30
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s confi uration.
A device’s confi uration can also be imported or exported:
To clone the confi urations of a pro rammable “PROFINET / EtherNet/IP Slave -
Converter” in order to confi ure another device in the same manner, it is necessary
to maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient
to duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 13 of 30
SOFTWARE OPTIONS:
By pressin the “Settings” ( ) button there is the possibility to chan e the lan ua e of the software and check the updatin s for the
compositor.
In the section “Lan ua e” it is possible to chan e the lan ua e of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatin s of the software compositor in ADFweb.com website.
Checkin the option “Check Software Update at Start of Program”, the
SW67660 check automatically if there are updatin s when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 14 of 30
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, PROFINET and
EtherNet/IP.
By Pressin the “Set Communication” button from the main window for SW67660 (Fi . 2) the
window “Set Communication” appears (Fi . 3).
The means of the fields for “PROFINET” are:
In the field “IP ADDRESS” insert the IP address that you want to ive to the Converter for
the PROFINET side;
In the fields “SUBNET Mask” insert the SubNet Mask for the PROFINET side;
In the fields “GATEWAY” insert the default ateway that you want to use for the PROFINET
side. This feature can be enabled or disabled pressin the Check Box field. This feature is used
for oin out of the net;
In the field “Port” the port used for PROFINET communication is defined. The port has a fixed
value of 34964;
In the field "PROFINET Name of Station" is possible to assi n a name to the PROFINET
node;
In the fields “Number Byte IN” insert the number of input byte of the slave station;
In the fields “Number Byte Out” insert the number of output byte of the slave station.
The means of the fields for “EtherNet/IP” are:
In the field “IP ADDRESS” insert the IP address that you want to ive to the Converter for
the EtherNet/IP side;
In the fields “SUBNET Mask” insert the SubNet Mask for the EtherNet/IP side;
In the fields “GATEWAY” insert the default ateway that you want to use for the EtherNet/IP
side. This feature can be enabled or disabled pressin the Check Box field. This feature is used
for oin out of the net;
In the field “Port” the port used for EtherNet/IP communication is defined. The port has a
fixed value of 44818.
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 15 of 30
PROFINET XML:
By pressin the “PROFINET XML” button it is possible to save the xml file for the PROFINET side.
With this feature you can save the confi uration of the converter of the PROFINET side.
Note:
When you import the .xml file on your PROFINET you have to add the main module and all the submodules present in it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 16 of 30
UPDATE DEVICE:
By pressin the “Update Device” button, it is possible to load the created Confi uration into
the device; and also the Firmware, if necessary.
If you don’t know the actual IP address of the device you have to use this procedure:
Turn off the Device;
Put Dip2 of ‘Dip-Switch A’ in ON position;
Turn on the device
Connect the Ethernet cable;
Insert the IP “192.168.2.205”;
Press the “Ping” button, “Device Found! must appear”;
Press the “Next” button;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” turn off the Device;
Put Dip2 of ‘Dip-Switch A’ in OFF position;
Turn on the device.
At this point the confi uration/firmware on the device is correctly updated.
Figure 4: “Update device” windows

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 17 of 30
If you know the actual IP address of the device, you have to use this procedure:
Turn on the Device with the Ethernet cable inserted;
Insert the actual IP of the Converter;
Press the “Ping” button, must appear “Device Found!”;
Press the “Next” button;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” the device automatically oes at
Normal Mode.
At this point the confi uration/firmware on the device is correctly update.
Note:
When you install a new version of the software, if it is the first time it is better you do the update of the Firmware in the HD67660
device.
Note:
When you receive the device, for the first time, you also have to update the Firmware in the HD67660 device.
Warnin :
If Fi . 5 appears when you try to do the Update try these points before seekin
assistance:
Try to repeat the operations for the update;
Try with another PC;
Try to restart the PC;
If you are usin the pro ram inside a Virtual Machine, try to use it in the main
Operatin System;
If you are usin Windows Seven or Vista or 8, make sure that you have the
administrator privile es;
Pay attention to the Firewall lock;
Check the LAN settin s.
In the case of HD67660 you have to use the software “SW67660”: www.adfweb.com\download\filefold\SW67660.zip.
Figure 5: “ rotection” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 18 of 30
MECHANICAL DIMENSIONS:
Figure
6
: Mechanical dimensions scheme
for H
D67660
-
A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 19 of 30
ORDERING INFORMATIONS:
The orderin part number is formed by a valid combination of the followin :
HD67660 – A 1
Connectors Type
1: Removable 5mm Screw Terminal
Enclosure Type
A: 1M, 35mm DIN Rail mountin
Device Family
HD67660: PROFINET / Ethernet/IP Slave - Converter
Order Code: HD67660-A1 - PROFINET / Ethernet/IP Slave - Converter
ACCESSORIES:
Order Code: AC34001 - Rail DIN - Power Supply 220/240V AC 50/60Hz – 12 V AC
Order Code: AC34002 - Rail DIN - Power Supply 110V AC 50/60Hz – 12 V AC

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET
/
EtherNet/IP
Slave
Document code: MN67660_ENG Revision 1.000 Pa e 20 of 30
PLC CONFIGURATION (for EtherNet/IP):
The confi uration and commissionin of the EtherNet/IP Converter as described on the followin pa es was accomplished with the help of
the “RSLo ix 5000” software of Rockwell Automation. In case of usin a control system from another supplier please attend to the
associated documentation.
These are the steps to follow:
1) Create a "Generic Ethernet Module" under the Ethernet section in the I/O Confi uration tree.