ADF Web PROFINET/SNMP Agent User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 1 of 28
User Manual
Revision 1.100
English
PROFINET / SNMP Agent - Converter
(Order Code: HD67613-A1)
For Website information:
www.adfweb.com? roduct=HD67613
For rice information:
www.adfweb.com? rice=HD67613-A1
Benefits and Main Features:
Very easy to configure
Triple Electrical isolation
Temperature range: -40°C/+85°C (-40°F/+185°F)
For other ROFINET products see also the following link:
Converter PROFINET to
www.adfweb.com? roduct=HD67078 (M-Bus
www.adfweb.com? roduct=HD67090 (M-Bus Wireless
www.adfweb.com? roduct=HD67178 (SNMP Manager
www.adfweb.com? roduct=HD67600 (NMEA 2000
www.adfweb.com? roduct=HD67601 (Serial
www.adfweb.com? roduct=HD67602 (Modbus Master
www.adfweb.com? roduct=HD67603 (Modbus Slave
www.adfweb.com? roduct=HD67604 (PROFIBUS Master
www.adfweb.com? roduct=HD67605 (PROFIBUS Slave
www.adfweb.com? roduct=HD67606 (CAN
www.adfweb.com? roduct=HD67607 (CANopen
www.adfweb.com? roduct=HD67608 (DeviceNet Master
www.adfweb.com? roduct=HD67609 (DeviceNet Slave
www.adfweb.com? roduct=HD67610 (J1939
www.adfweb.com? roduct=HD67611 (Modbus TCP Master
www.adfweb.com? roduct=HD67612 (Modbus TCP Slave
www.adfweb.com? roduct=HD67614 (DMX
www.adfweb.com? roduct=HD67660 (EtherNet/IP
www.adfweb.com? roduct=HD67679 (BACnet Slave
www.adfweb.com? roduct=HD67719 (BACnet Master
www.adfweb.com? roduct=HD67818 (KNX
www.adfweb.com? roduct=HD67848 (DALI
Do you have your customer protocol? Then go to:
www.adfweb.com? roduct=HD67003
Do you need to choose a device? Do you want help?
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 2 of 28
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LES OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
OWER SU LY 7
FUNCTION MODES 8
LEDS 9
ETHERNET 10
USE OF COM OSITOR SW67613 11
NEW CONFIGURATION / O EN CONFIGURATION 12
SOFTWARE O TIONS 13
SET COMMUNICATION 14
SET SNM ACCESS 15
ROFINET XML 17
SNM MIB 17
U DATE DEVICE 18
SNM COMMUNICATION 20
MECHANICAL DIMENSIONS 25
ORDERING INFORMATIONS 26
ACCESSORIES 26
DISCLAIMER 27
OTHER REGULATIONS AND STANDARDS 27
WARRANTIES AND TECHNICAL SU ORT 28
RETURN OLICY 28
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision Date Author Chapter Description
1.000 25/05/2015 Ff All First Release
1.100 02/03/2017 Ff All New software version

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 3 of 28
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 4 of 28
EXAMPLES OF CONNECTION:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 5 of 28
CONNECTION SCHEME:
Figure 1: Connection scheme for HD67613-A1

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 6 of 28
CHARACTERISTICS:
The HD67613-A1 is a ROFINET / SNM Converter.
It allows for the following characteristics:
Up to 1024 bytes in reading and 1024 bytes in writing;
Isolation between Ethernet - ower Supply;
Two-directional information between SNM bus and ROFINET bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67613 software on your C in order to perform the following:
Define the parameters of ROFINET line;
Define the parameters of SNM line;
Define the SNM OID in Read and in Write;
Define the SNM Trap messages;
Update the device.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 7 of 28
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67613-A1 3.5
HD67613-A1
Caution:
Do n
ot reverse the polarity power

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 8 of 28
FUNCTION MODES:
The device has got two function modes depending on the position of the ‘Dip2 of Dip-Switch A’:
The first, with ‘Dip2 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip2 of Dip-Switch A’ at “ON” position, is used for uploading the roject and/or Firmware.
For the operations to follow for the updating, see ‘U DATE DEVICE’ section.
According to the functioning mode, the LEDs will have specific functions, see ‘LEDS’ section.
Warning:
Dip1 of ‘Dip-Switch A’ must be at ON position to work even if the Ethernet cable is not inserted.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 9 of 28
LEDS
The device has got six LEDs that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: MT [maintenance display]
(yellow)
ON: Maintenance problem is present
OFF: No maintenance problems are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
3: BF [bus fault] (red)
ON: The Ethernet connection is defective; the I
address exists several times in the network; the own
NameOfStation exists several times in the network; no
I address has been set
Flashing: At least one configured AR is no longer in
the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
4: SF [group error] (red) ON: At least one AR is not in the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
5: Ethernet1 Tx (green) Blinks when Ethernet frames are transmitted Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
6: Ethernet2 Tx (green) Blinks when Ethernet frames are transmitted Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 10 of 28
ETHERNET:
The ROFINET and SNM connection and the updating of the converters must be made using Connector3 and/or Connector4 of HD67613-A1
with at least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms
relative to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to
connect the device to a C/ LC/other is recommended the use of a cross cable.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 11 of 28
USE OF COMPOSITOR SW67613:
To configure the Converter, use the available software that runs with Windows called SW67613. It is downloadable on the site
www.adfweb.com and its operation is described in this document. ( his manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (X , Vista, Seven, 8, 10; 32/64bit).
When launching the SW67613, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67613

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 12 of 28
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “ ROFINET / SNM Agent - Converter”
in order to configure another device in the same manner, it is necessary to maintain
the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 13 of 28
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67613 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 14 of 28
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, ROFINET and SNM .
By ressing the “Set Communication” button from the main window for SW67613 (Fig. 2) the window
“Set Communication” appears (Fig. 3).
The means of the fields for “ ROFINET” are:
In the fields “IP ADDRESS” the I address of ROFINET side of the converter is defined;
In the fields “SUBNET Mask” the SubNet Mask of ROFINET side of the converter is defined;
In the fields “GATEWAY” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “Port” the port number used for ROFINET communication is defined (fixed at 34964);
In the field "PROFINET Name of Station" the name of ROFINET side of the converter is defined;
In the fields “Number Byte IN” the number of input byte of ROFINET side of the converter is
defined;
In the fields “Number Byte Out” the number of output byte of ROFINET side of the converter is
defined.
The means of the fields for the “SNM ” section are:
In the fields “IP ADDRESS” the I address of SNM side of the converter is defined;
In the fields “SUBNET Mask” the SubNet Mask of SNM side of the converter is defined;
In the fields “GATEWAY” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “SNMP Name of Station” the name of SNM side of the converter is defined;
In the field "Contact" the contact for SNM Agent station is defined;
In the field "Location" the location for SNM Agent station is defined.
Figure
3
:
“Set Communication” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 15 of 28
SET SNMP ACCESS:
By pressing the “Set SNMP Access” button from the main window for SW67613 (Fig. 2) the “Set SNM Access” window appears (Fig. 4). In
this section, it is possible to create the OIDs for SNM side to read or write using GET and SET commands or to be sent as TRA messages.
The window is divided into two
tables, one for SNM readings and
one for SNM writings.
The data of the columns in the
“SNM Read” have the following
meanings:
If the field “Enable” is
checked, the SNM OID is
enabled;
In the field “Community
Name” the name of the
Community is defined;
In the field “Type” the type of data of the OID is defined (Octet String or Integer);
If the field “On Change” is checked, the OID is sent as Trap when the data from ROFINET side change;
If the field “On Timer” is checked, the OID is sent as Trap cyclically;
In the field “Time (ms ” the delay time for the Trap send is defined (if “On Timer” option is checked);
In the field “Position” the starting byte of the internal memory array where taking the data is defined;
In the field “Start Bit” the starting bit of the selected osition is defined;
In the field “Num Bits/Bytes” the dimension of the OID is defined. For ‘Int’ type the dimension is in bit, for ‘String’ type the
dimension is in bytes;
In the field “Description” the description/name of the OID is defined;
In the field “IP Address” the I Address of the SNM device where addressing the Trap message is defined. This field is used only
when ‘On Change’ or ‘On CMD’ or ‘On Timer’ option is checked;
In the field “Mnemonic” a brief description of the OID is defined.
Figure
4a
: “
Set SNMP Access
-
> SNMP Read
” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 16 of 28
The data of the columns in the “SNM
Write” have the following meanings:
If the field “Enable” is
checked, the SNM OID is
enabled;
In the field “Community
Name” the name of the
Community is defined;
In the field “Type” the type of
data of the OID is defined
(Octet String or Integer);
In the field “Position” the
starting byte of the internal memory array where mapping the data is defined;
In the field “Start Bit” the starting bit of the selected osition is defined;
In the field “Num Bits/Bytes” the dimension of the OID is defined. For ‘Int’ type the dimension is in bit, for ‘String’ type the
dimension is in bytes;
In the field “Description” the description/name of the OID is defined;
In the field “Mnemonic” a brief description of the OID is defined.
Note:
If the fields “On Change”, “On CMD” and “On Timer” are disabled, the OID is readable using standard GET command. If one of these
fields is enabled, the OID is sent as Trap and it is readable by GET command too.
Note:
The field “Description” must start with lowercase letter and it cannot contain special chars (just letters and numbers). All the
“Description” fields must be different between them.
Figure
4b
: “
Set SNMP Access
-
> SNMP Write
” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 17 of 28
PROFINET XML:
By pressing the “PROFINET XML” button it is possible to save the xml file for the ROFINET side.
With this feature you can save the configuration of the converter of the ROFINET side.
SNMP MIB:
By pressing the “SNMP MIB” button it is possible to save the MIB file for the SNM Manager.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 18 of 28
UPDATE DEVICE:
By pressing the “Update Device” button, it is possible to load the created Configuration into the
device; and also the Firmware, if necessary.
If you don’t know the actual I address of the device you have to use this procedure:
Turn OFF the Device;
ut Dip2 of ‘Dip-Switch A’ in ON position;
Turn on the device
Connect the Ethernet cable;
Insert the I “192.168.2.205”;
ress the “Ping” button, “Device Found!” must appear;
ress the “Next” button;
Select which operations you want to do;
ress the “Execute update firmware” button to start the upload;
When all the operations are “OK” turn off the Device;
ut Dip2 of ‘Dip-Switch A’ at OFF position;
Turn ON the device.
If you know the actual I address of the device, you have to use this procedure:
Turn on the Device with the Ethernet cable inserted;
Insert the actual I of the Converter;
ress the “Ping” button, must appear “Device Found!”;
ress the “Next” button;
Select which operations you want to do;
ress the “Execute update firmware” button to start the upload;
When all the operations are “OK” the device automatically goes at Normal Mode.
At this point the configuration/firmware on the device is correctly update.
Figure 5: “Update device” windows

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 19 of 28
Figure
6
:
“
Protection
” window
Note:
When you install a new version of the software, if it is the first time it is better you do the update of the Firmware in the HD67613
device.
Note:
When you receive the device, for the first time, you also have to update the Firmware in the HD67613 device.
Warning:
If Fig. 6 appears when you try to do the Update try these points before seeking
assistance:
Try to repeat the operations for the updating;
Try with another C;
Try to restart the C;
Check the LAN settings;
If you are using the program inside a Virtual Machine, try to use in the main Operating System;
If you are using Windows Seven, Vista, 8 or 10 make sure that you have the administrator privileges;
In case you have to program more than one device, using the "UD Update", you have to cancel the AR table every time you
connect a new device on Ethernet. For do this you have to launch the "Command rompt" and write the command "arp -d". ay
attention that with Windows Vista, Seven, 8 or 10 you have to launch the "Command rompt" with Administrator Rights;
ay attention at Firewall lock.
In the case of HD67613 you have to use the software “SW67613”: www.adfweb.com\download\filefold\SW67613.zip.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 20 of 28
SNMP COMMUNICATION
In order to read/write the data from/to ROFINET side, it is necessary to use specific SNM commands in order to see the SNM Input and
write the SNM Output.
Reading PROFINE data from SNMP:
In order to read the data from the HD67613, it is necessary to use the GET command.
Each OID defined in the section “Set SNM Access -> SNM Read” will be placed in the MIB tree of the converter.
In addition, it will be possible to read the entire internal map of the converter in memory blocks of 128 bytes: this feature is helpful in phase
of configuration of the converter.