ADLINK Technology cPCI-6630 Series User manual

Leading EDGE COMPUTING
Manual Rev.: 1.1
Revision Date: June 3, 2020
Part No: 50-15110-2010
cPCI-6630 Series
Value 6U CompactPCI®
Intel® Core™ i7/i3/Celeron® Processor Blade
User’s Manual

ii Revision History
Leading EDGE COMPUTING
Revision History
Revision Release Date Description of Change(s)
1.0 2018-02-02 Initial release
1.1 2020-06-03 Update block diagram, correct J3 pinout

Preface iii
cPCI-6630
Preface
Copyright © 2017, 2020 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Leading EDGE COMPUTING
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

Table of Contents v
cPCI-6630
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures........................................................................ ix
List of Tables.......................................................................... xi
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 2
1.3 Package Contents ............................................................... 3
2 Specifications..................................................................... 5
2.1 cPCI-6630(D) Processor Blade Specifications.................... 5
2.2 Block Diagrams.................................................................... 8
2.3 I/O Connectivity Table ......................................................... 9
2.4 Power Requirements......................................................... 10
3 Functional Description .................................................... 13
3.1 Processors......................................................................... 13
3.2 Chipset............................................................................... 15
3.3 PMC................................................................................... 16
3.4 Intel® Turbo Boost Technology......................................... 16
3.5 Intel® Hyper-Threading Technology.................................. 16
3.6 Battery ............................................................................... 17
4 Board Interfaces............................................................... 19
4.1 cPCI-6630(D) Component Side Layout............................. 19
4.2 cPCI-6630 Solder Side Layout .......................................... 20
4.3 cPCI-6630D Assembly Layoutt.......................................... 21

vi Table of Contents
Leading EDGE COMPUTING
4.4 cPCI-6630(D) Front Panel ................................................. 22
4.5 User LEDs.......................................................................... 24
4.6 Connector Pin Assignments............................................... 25
4.7 Switches and Buttons ........................................................ 38
5 Getting Started.................................................................. 45
5.1 CPU and Heatsink ............................................................. 45
5.2 CFast Card Installation ...................................................... 46
5.3 CompactFlash Card Installation (optional)......................... 49
5.4 2.5" SATA Drive Installation............................................... 52
5.5 PMC Installation (cPCI-6630D only).................................. 55
5.6 Installing the cPCI-6630(D) to the Chassis........................ 60
6 Driver Installation.............................................................. 61
6.1 cPCI-6630 Drivers.............................................................. 61
7 Utilities............................................................................... 63
7.1 Watchdog Timer................................................................. 63
7.2 User LED Programming..................................................... 68
8 BIOS Setup Utility............................................................. 71
8.1 Starting the BIOS............................................................... 71
8.2 Main Setup......................................................................... 76
8.2.1 System Management.....................................................77
8.3 Advanced BIOS Setup....................................................... 81
8.3.1 AMT Configuration.........................................................82
8.3.2 PCH-FW Configuration..................................................83
8.3.3 IT8786 Super IO Configuration......................................84
8.3.4 Hardware Monitor ..........................................................86
8.3.5 Serial Port Console Redirection.....................................87
8.3.6 CPU Configuration.........................................................92
8.3.7 SATA Configuration.......................................................94
8.3.8 Network Stack Configuration.........................................97
8.3.9 CSM Configuration ........................................................98

Table of Contents vii
cPCI-6630
8.3.10USB Configuration.......................................................100
8.4 Chipset Setup.................................................................. 102
8.4.1 System Agent (SA) Configuration................................103
8.4.2 PCH-IO Configuration..................................................107
8.5 Boot Settings ................................................................... 110
8.6 Security Setup ................................................................. 112
8.7 Save & Exit Menu............................................................ 113
9 Checkpoints & Beep Codes .......................................... 115
9.1 Checkpoint Ranges ......................................................... 115
9.2 Standard Checkpoints ..................................................... 115
9.3 OEM-Reserved Checkpoint Ranges................................ 124
Important Safety Instructions............................................ 125
Getting Service.................................................................... 127

viii Table of Contents
Leading EDGE COMPUTING
This page intentionally left blank.

List of Figures ix
cPCI-6630
List of Figures
Figure 2-1: cPCI-6630(D) Blade Functional Block Diagram...............8
Figure 4-1: cPCI-6630(D) Component Side Layout.........................19
Figure 4-2: cPCI-6630(D) Solder Side Layout .................................20
Figure 4-3: cPCI-6630D Assembly Layout.......................................21
Figure 4-4: cPCI-6630(D) LED Labels.............................................24

xListofFigures
Leading EDGE COMPUTING
This page intentionally left blank.

List of Tables xi
cPCI-6630
List of Tables
Table 2-1: cPCI-6630 Processor Blade Specifications.....................5
Table 2-2: cPCI-6630(D) I/O Connectivity ........................................9
Table 4-1: cPCI-6630(D) Front Panel System LED Descriptions...23
Table 4-2: DVI-I Connector Pin Definition.......................................25
Table 4-3: DVI-D Connector Pin Definition.....................................26
Table 4-4: USB 2.0 Pin Definition...................................................27
Table 4-5: Front Panel COM1 Pin Definitions.................................28
Table 4-6: COM RJ-45 to DB-9 Cable Pin Definitions....................28
Table 4-7: RJ-45 GbE Pin Definitions.............................................29
Table 4-8: LAN LED Status Definitions...........................................29
Table 4-9: Serial ATA 7-pin Connector Pin Definition.....................30
Table 4-10: Serial ATA Connector with power Pin Definition............30
Table 4-11: CFast Socket Pin Definition...........................................31
Table 4-12: PMC Connector Pin Definitions.....................................32
Table 4-13: CompactPCI J1 Connector Pin Definition......................34
Table 4-14: CompactPCI J2 Connector Pin Definition......................35
Table 4-15: CompactPCI J3 Connector Pin Definition......................36
Table 4-16: CompactPCI J5 Connector Pin Definition......................37

xii List of Tables
Leading EDGE COMPUTING
This page intentionally left blank.

Introduction 1
cPCI-6630
1 Introduction
1.1 Overview
The ADLINK cPCI-6630 Series is a 6U 4/8 HP CompactPCI® pro-
cessor blade featuring a 6th generation Intel® Core™ i7/i3/Cel-
eron® processor and Mobile Intel® HM170 PCH with DDR4-2133
non ECC memory up to 32GB via 2 SODIMM sockets. The sin-
gle-slot 4HP cPCI-6630 features front panel I/O including 1x DVI-I,
1x DVI-D, 3x GbE, 3x USB 3.0, 1x USB 2.0, 1x RJ-45 COM port
and 1x PS/2 KB/MS. The dual-slot 8HP cPCI-6630D provides one
DB-9 COM port and one 32-bit/33MHz PMC space in additional to
single slot version's front panel IO. Available storage options for
both the cPCI-6630 and cPCI-6630D include a 1x 2.5" SATA drive
space and 1x 7-pin SATA connector. In addition, the cPCI-6630
Series offers an onboard CFast slot with CompactFlash slot as
option.
Graphics support for the cPCI-6630 Series is integrated on the
CPU. The 6th generation Intel® Core™ processor (formerly "Sky-
lake") supports hardware-accelerated HEVC 8-bit decoding and
encoding that brings more efficient and smarter compression for
video applications. The cPCI-6630 also supports 3 independent
displays when mated with cPCI-R6002 or cPCI-R6100 rear transi-
tion modules.
Rear I/O signals to RTM include 2x GbE by Intel® Ethernet Con-
troller I210 switched from the front panel, 1x DVI-I switchable to
J3, 1x DVI-D to J5, 1x PCIe x4 (configurable to 4x PCIe x1), 2x
SATA 3 Gb/s, 6x USB 2.0, 5x GPIO, High Definition Audio,
KB/MS, and 2x serial ports.
The cPCI-6630 Series is powered by 5V only, offers balanced per-
formance provided by the 6th generation Intel® Core™ processor
family, and is an ideal solution for industrial applications that
require best value-per-watt computing power. The cPCI-6630
Series provides additional flexibility by supporting operation in
peripheral slots without CompactPCI bus communication (Satellite
mode), as well as supporting remote monitoring and manageabil-
ity using ADLINK's SEMA Utilities 3.5, making it Industry 4.0
ready.

2Introduction
Leading EDGE COMPUTING
1.2 Features
X6U CompactPCI blade in 4/8HP width form factor
XPowered by single 5V power rail
X14nm Intel® Core™ i7-6820EQ Processor (4 cores, 8 threads,
8MB Smart Cache, 2.8 GHz) and Mobile Intel® HM170 Chipset
XGraphics and memory controllers integrated in processor
XSupports H.265 hardware-accelerated HEVC 8-bit decoding
and encoding
XDual channel DDR4-2133 non-ECC via 2x DDR4-2133
SODIMM socket, up to 32GB
X64bit/66MHz CompactPCI Interface based on PCI specifica-
tions, universal V(I/O)
XSupports Host mode operation as a master in host slots and
supports Satellite mode operation as a standalone computer
without connection to the PCI bus
XOne 32-bit/33MHz PMC site on cPCI-6630D
XOne DVI-I port and one DVI-D on front panel
XThree PCIe Gigabit Ethernet egress ports on front panel sup-
ported by an Intel Ethernet controller, one supports Intel® AMT
9.0 by Intel® Ethernet Controller I219LM, two Ethernet ports
are switchable to J3 for PICMG 2.16
XAdditional two Gigabit Ethernet ports with cPCI-R6100 Series
RTM
XThree USB 3.0 ports and one USB 2.0 port on front panel
XHigh definition audio routed to RTM
XOnboard 2.5" SATA SSD space and one 7-pin SATA connector
XOptional CFast or CompactFlash slot (CFast by default)
XOptional SEMA 3.0/3.5 for system management

Introduction 3
cPCI-6630
1.3 Package Contents
The cPCI-6630 is packaged with the following components. If any
of the following items are missing or damaged, retain the shipping
carton and packing material and contact the dealer for inspection.
Please obtain authorization before returning any product to
ADLINK. The packing contents of cPCI-6630 Series non-standard
configurations will vary depending on customer requests.
cPCI-6630 Processor Blade
XProcessor Blade
ZCPU and memory specifications will differ depending on
options selected
ZThermal module is assembled on the board
XDVI-I to VGA adapter (PN: 30-52002-1000)
XRJ-45 to DB-9 COM adapter cable (PN: 30-01020-0200)
XPS/2 keyboard/mouse combo cable (PN: 30-01016-2000)
X2.5" SATA drive accessory pack (PN: 58-99097-0010)
X2.5” SATA adapter board (PN: 59-37571-0000)
XCFast accessory pack (PN: 58-99721-0000, CFast SKU
only)
cPCI-6630D Processor Blade
Same as the cPCI-6630 with the following additional items:
XPMC accessory pack (cPCI-6630D only)
XPMC adapter board (PN: 59-37540-0010)
Compatible Rear Transition Modules
XcPCI-R6002 (PN: 91-37197-3010)
XcPCI-R6002D (PN: 91-37197-3130)
XcPCI-R6100 (PN: 91-37199-0040)
XcPCI-R6110 (PN: 91-37199-1040)
XcPCI-R6120 (PN: 91-37199-401E)

4Introduction
Leading EDGE COMPUTING
NOTE:
NOTE:
The contents of non-standard cPCI-6630 configurations may
vary depending on the customer’s requirements.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.

Specifications 5
cPCI-6630
2 Specifications
2.1 cPCI-6630(D) Processor Blade Specifications
CompactPCI®
Standards • PICMG® 2.0 CompactPCI® Rev. 3.0 • PICMG® 2.1 Hot Swap Specification Rev. 2.0
• PICMG® 2.16 Packet Switching Backplane Rev. 1.0
Mechanical • Standard 6U CompactPCI®
• Board size: 233mm x 160mm
• Single/dual-slot (4/8HP, 20.32/40.64mm)
• CompactPCI® connectors: J1, J2, J3, J5
Processor • Intel® Core™ i7-6820EQ Processor, quad core, eight thread,
2.8 GHz (3.5 GHz Turbo), 8MB Smart Cache, TDP 45W
• Intel® Core™ i3-6100E Processor, dual core, four thread, 2.7
GHz, 3MB Smart Cache, TDP 35W
• Intel® Celeron® Processor G3900E, dual core, dual thread,
2.4 GHz, 2MB Smart Cache, TDP 35W
• Passive heatsink
Chipset • Mobile Intel® HM170 PCH
Memory • Dual channel DDR4-2133 non-ECC memory via 2x
SODIMMs
• Supports up to 32GB
Graphics • Integrated on Intel® Core™ i7-6820EQ and Core™ i3-6100E
processors,: Intel® HD Graphics 530
• Integrated on Intel® Celeron® processor G3900E,: Intel® HD
Graphics 510
• One DVI-I and one DVI-D port on front panel with shared
VGA signal switchable to J3 and DisplayPort signal
switchable to J5
• Up to three independent displays with cPCI-R6002 and
cPCI-R6100 RTMs
Gigabit
Ethernet • One PCIe x1 Intel® I219LM GbE PHY and two PCIe x1 Intel® I210IT Gigabit Ethernet controllers
• Three egress 10/100/1000BASE-T ports on front panel, one
supporting Intel® AMT 9.0 by I219LM PHY controller, and
two others 10/100/1000BASE-T ports switchable to rear for
PICMG 2.16
CompactPCI
Bus • PCI 64-bit/66MHz; 3.3V, 5V universal V I/O • Supports Host mode operation as a master in host slots and
supports Satellite mode operation as a standalone computer
without connection to the PCI bus
Table 2-1: cPCI-6630 Processor Blade Specifications

6 Specifications
Leading EDGE COMPUTING
Serial Ports • Up to four serial ports
• Up to two RS-232/422/485 serial ports on front panel (one on
cPCI-6630, two on cPCI-6630D)
• Two RS-232 COM port routed to J3
USB 2.0 • One USB 2.0 port on front panel
• Up to six USB 2.0 ports routed to rear transition module
USB 3.0 • Three USB 3.0 ports on front panel
PMC • One 32-bit/33 MHz PMC site
Audio • High definition audio routed to rear
Storage
Interfaces1• One onboard 2.5” SATA connector supporting SATA 6Gb/s
drive on cPCI-6630
• Optional onboard CFast slot or CompactFlash slot
• One SATA 3Gb/s 7-pin connector onboard
• Three SATA 3Gb/s channels routed to RTM (two to J3 and
one to J5)
Faceplate I/O cPCI-6630 (4HP)
• 3x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port & 1x DVI-D port
• 3x USB 3.0 ports
• 1x USB 2.0 port
• 1x RJ-45 serial port supporting RS-232/422/485
• 1x PS/2 keyboard/mouse port
cPCI-6630D (8HP)
• 3x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port & 1x DVI-D port
• 3x USB 3.0 ports
• 1x USB 2.0 port
• 1x RJ-45 serial port & 1x DB-9 serial port supporting
RS-232/422/485
• 1x PS/2 keyboard/mouse port
• 1x PMC slot
BIOS • AMI UEFI BIOS, 64 Mbit SPI serial flash, supports
Configurable TDP (can be set as Nominal and Down)
OS
Compatibility • Microsoft Windows 7 64-bit • Microsoft Windows 8.1 64-bit
• Microsoft Windows 10 64-bit
• Red Hat Enterprise Linux 6.4, 64-bit
• Fedora 14, 32-bit
• VxWorks 6.8/6.9/7
• QNX 6.5/6.6
• Other OS support upon request
Table 2-1: cPCI-6630 Processor Blade Specifications

Specifications 7
cPCI-6630
1. The storage device limits the operational vibration tolerance. When
the application requires higher specification for anti-vibration, it is
recommended to use a flash storage device.
2. ADLINK-certified thermal design. The thermal performance is depen-
dent on the chassis cooling design. Sufficient forced air-flow is required.
Temperature limits of optional mass storage devices may also affect the
thermal specification.
Environmental • Operating Temperature (with forced air flow)2:
Standard: -20°C to +60°C
Extended: -20°C to +70°C with forced air flow
• Storage Temperature: -50°C to 100°C
• Humidity: 95% @60°C non-condensing
• Shock: 20G peak-to-peak, 11ms duration, non-operating
•Vibration
1: 2Grms, 5-500Hz, each axis, operating (w/o hard
drive)
EMI • FCC 47 CER Part 15 Class B
• CE EN55032 Class B
• IEC 61000 Class A
Table 2-1: cPCI-6630 Processor Blade Specifications

8 Specifications
Leading EDGE COMPUTING
2.2 Block Diagrams
cPCI-6630(D) Blade
Figure 2-1: cPCI-6630(D) Blade Functional Block Diagram
Front Panel
PCIe to PCI
Brid
g
e
Super IO
Intel
I210
PCIe x1
DMI3
J1/J2 J3
PCIe x1
LPC
COM1
DDR4-2133
USB 1
DVI-D
2.5” HDD
PMC
Intel
®
Skylake H
SO-DIMM, max. 16GB
SO-DIMM, max. 16GB
PCI 32b/33M
PCIe x1
HM170 PCH
PCIe to PCI
Brid
g
e
PCI 64b/66M
USB 2.0
SATA0 CF
USB
USB 3.0
DDPB/C
USB 2
USB 3
COM2
PCIe x1
LAN 1
LAN 2
LAN 3
USB 4
KB/MS
SATA3/4
J5
Front Panel (2
n
d
layer)
COM1
PCIe x4
DP to
VGA
PCIe x1
CFAST
SATA1
7-pin
SATA2
USB 2.0
Controller
PCIe x1
COM2
COM3/4
SPI
BIOS
J3
DVI-I
EDP
J5
DDPD
J3
Intel
I210
Intel
I219
J3
PCI
e
USB x6
HDA
PCIe to
SAT
A
SATA5