Advantech MIC-75M20 Installation and operation manual

MIC-75M20 Startup Manual 1
Before you begin installing your card, please make sure
that the following items have been shipped:
1. MIC-75M20 Module x1 P/N: MIC-75M20-00A1E
2. MIC-75M20 Startup Manual x1 P/N: 20015M2000
3. Warranty Card P/N: 2190000902
4. Card Clamp Pad x 4 P/N:1990024989T000
5. Wall-Mount BKT (Left) x1 P/N: 1960070545N001
6. Wall-Mount BKT (Righ) x1 P/N: 1960070543N001
If any of these items are missing or damaged, please
contact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at: get.
adobe.com/reader (Acrobat is a trademark of
Adobe)
MIC-75M20
PCIE Expansion Module for MIC-7 Series
Embedded System
Startup Manual
PCIe Slots
• One PCIex16 socket
Note 1: PCIEx16 power consumes 35W.
• One PCIex4 socket
Note 2: PCIEx4 supports 15W power consumption.
Note 3: MIC-75M20 does not support MIC-7300 series
systems.
Environment
• Operating Temperature:
-20 ~ 60° C with 0.7 m/sec air flow: with 1 x Industrial SSD
without PC expansion boards
0 ~ 45° C with 0.7 m/sec air flow: with 1 x 2.5” HDD
without PC expansion boards
• Storage Temperature: - 40 ~ 85° C (-40 ~185° F)
• Relative Humidity: 95% @ 40° C (non-condensing)
Mechanical
• Dimensions (H x W x D): 92 x 90 x 230 mm
Note 1: Please add a fan to i-module if the add-on card
total power consumption is over 45W.
Specications Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com.tw/support/default.
aspx
This manual is for the MIC-75M20 Series Rev. A1.
Part No. 20015M2000
Printed in China
1st Edition
January 2016

2 MIC-75M20 Startup Manual
2. Undo 6x screws of MIC-75M20.
2
2
2
2
2
2
3. Remove i-door cover by MIC-7500 bottom cover and
assemble and secure cover in i-module’s bottom cover.
3
3
4. Assemble MIC-75M20 and MIC-7 series device and
secure 4x screws.
3
3
3
3
The table below lists the functions of each of the connec-
tors.
PCIE x 16 Socket
PCIEx4 Socket
12V Extral Power
FAN CON 1 & 2
5V Extral Power
Connectors
No. Item Function
1 SATAPWR1 4 Pin Power connector (5V)
2 PWR2 4 Pin Power connector (12V)
3 FAN 1 4 Pin FAN connector
4 FAN 2 4 Pin FAN connector
5 PCIEx4_1 PCIEx4 Socket
6 PCIEx16_1 PCIEx16 Socket
System Installation
MIC-7 series i-module can assemble with all MIC-7 series
IPC system.
1. Undo MIC-7 series system screws and remove the
bottom cover.
1
1
1
1
2
Simple Maintenance Process
Jumpers and Connectors
Simple Maintenace Process (Cont.)

MIC-75M20 Startup Manual 3
Note: MIC-75M20 has 2 bolts which must be aligned
with the holes on the device.
5. Replace the cover and secure with screws.
Note: The chassis cover has a notch designed in and
it must mate with the hook on the chassis.
Chassis Cover
Chassis hook
FAN Installation (Optional)
MIC-75M20 supports two 4x4CM fan spaces. If you want
to install high perfornamce expansion cards, (For example:
graphics or a PoE card) or total power consumption is over
45W, please install a fan for thermal issues. A fan is an op-
tional module. If your system needs a fan module, please
contact your distributor or sales representative.
Fan Module P/N: 98R1752000E.
1
Fan Connector
3
1
2
2
1. Undo fan 1 & 2 covers.
2. Secrue fan protection nets with 4 screws.
3. Assemble and secure the fan in the chassis with 4
screws.
4. Plug the fan power cable into the connector on the
backplane board.
FAN Filter Installation
If your system has a fan installed, we recommend you to
replace the system fan filter at regular intervals to ensure
the stability of the system cooling.
1. Undo the system cover and remove the old fan filter.
2. Change new fan filter and replace system cover with screws.
Simple Maintenance Process (Cont.) Simple Maintenance Process (Cont.)

4 MIC-75M20 Startup Manual
PCIE x 16 Socket
PCIEx4 Socket
12V Extral Power
FAN CON 1 & 2
5V Extral Power
197.20
192
123
230
235.20
123
IO Connectors
System Dimensions