Advantech MIC-7 Series Installation and operation manual

MIC-75M11 Startup Manual 1
Before you begin installing your card, please make sure
that the following items have been shipped:
1. MIC-75M11 Module x1 P/N : MIC-75M11-00A1E
2. MIC-75M11 Startup Manual x1 P/N :20015M1100
3. Warranty Card P/N: 2190000902
4. Card Clamp Pad x 4 P/N:1990024989T000
5. Wall-Mount BKT (Left) x1 P/N: 1960070545N001
6. Wall-Mount BKT (Righ) x1 P/N: 1960070543N001
If any of these items are missing or damaged, please
contact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at: get.
adobe.com/reader (Acrobat is a trademark of
Adobe)
MIC-75M11
PCIE/PCI Expansion Module for MIC-7 Series
Embedded System
Startup Manual
PCIe Slots
• One PCIex16 socket
Note 1: PCIEx16 power consumes 35W.
Note 2: MIC-73 series products (ATOM CPU), only sup-
ports PCIex4 or PCIex1 signals.
32-bit PCI
• One 32 Bit/33Mhz PCI socket
Note 1: PCI socket supports 15W power consumption.
Environment
• Operating Temperature:
-20 ~ 60° C with 0.7 m/sec air flow: with 1 x Industrial SSD
without PC expansion boards
0 ~ 45° C with 0.7 m/sec air flow: with 1 x 2.5” HDD
without PC expansion boards
• Storage Temperature: - 40 ~ 85 °C (-40 ~185 °F)
• Relative Humidity: 95% @ 40 °C (non-condensing)
Mechanical
• Dimensions (H x W x D): 92 x 90 x 230 mm
Note 1: Please add a fan to the i-module when add-on
card total power consumption is over 45W.
Specications Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com.tw/support/default.
aspx
This manual is for the MIC-75M11 Series Rev. A1.
Part No. 20015M1100
Printed in China
1st Edition
January 2016

2 MIC-75M11 Startup Manual
2. Undo 6x screws.
2
2
2
2
2
2
3. Remove i-door cover and assemble and secure the
cover on i-module’s bottom cover.
3
3
4. Assemble MIC-75M11 and MIC-7 series devices and
secure by 4x screws.
3
3
3
3
The table below lists the functions of each of the connector.
PCIE x 16 Socket
PCI Socket
12V Extral Power
SATA CON
SATA Power CON
FAN CON
Connectors
No. Item Function
1 SATAPWR1 4 Pin Power connector (5V)
2 PWR2 4 Pin Power connector (12V)
3 FAN 1 4 Pin FAN connector
4 FAN 2 4 Pin FAN connector
5 PCI_1 PCI socket
6 PCIEx16_1 PCIEx16 Socket
System Installation
MIC-7 series i-module can assemble with all MIC-7 series
IPC system.
1. Undo MIC-7 series system screws and remove the
bottom cover.
1
1
1
1
2
Simple Maintenance Process
Jumpers and Connectors
Simple Maintenance Process (Cont.)

MIC-75M11 Startup Manual 3
Note: MIC-75M11 has 2 bolts and it must be aligned
with the holes on the device.
5. Replace the cover and secure with screws.
Note: The chassis cover has a notch designed in and
it must mate with at a hook on the chassis.
Chassis Cover
Chassis hook
Fan Installation (Optional)
MIC-75M11 supports two 4x4CM fan spaces. If you want
to install high performance expansion cards (For example:
graphics or a PoE card) or total power consumption is over
45W, please install a fan for thermal issues.
A fan is an optional module. If your system needs a fan
module, please contact your distributor or sales represen-
tative.
Fan Module P/N: 98R1752000E.
1
Fan Connector
3
1
2
2
1. Undo fan 1 & 2 cover.
2. Secure fan protectoin nets with 4 screws.
3. Assemble and secure fan in chassis with 4 screws.
4. Plug the fan power cable into the connector on the-
backplane board.
Fan Filter Installation
If your system has a fan installed, we recommend you to
replace the system fan filter at regular intervals to ensure
the stability of the system cooling.
1. Undo system cover and remove old Fan filter.
2. Change new fan filter and replace system cover with screws.
Simple Maintenance Process (Cont.) Simple Maintenance Process (Cont.)

4 MIC-75M11 Startup Manual
PCIE x 16 Socket
PCI Socket
12V Extral Power
SATA CON
SATA Power CON
FAN CON
197.20
192
123
230
235.20
123
IO Connectors
System Dimensions