Advantech PCE-7132 Installation and operation manual

PCE-7132/5132/5032 Startup Manual 1
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
1. PCE-7132/5132/5032 PICMG 1.3 single host board
2. PCE-7132/5132/5032 startup manual
3. Serial ATA HDD data cables P/N: 1700003194
4. COM + printer ports cable kit P/N: 1701260305
5. Warranty card P/N: 2190000902
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1: For detailed contents of PCE-7132/5132/5032,
please refer to user manual on the Advantech
Website.
Note 2:  AcrobatReaderisrequiredtoviewanyPDFle.
Acrobat Reader can be downloaded at: get.
adobe.com/reader (Acrobat is a trademark of
Adobe)
PCE-7132/5132/5032 LGA1200 Intel®CoreTM i9/i7/i5/
i3/ Pentium®ECC/non-ECC PICMG 1.3 Single Host
Board with (ECC/non-ECC) DDR4/M.2 (2280)/ Dual
GbE LAN
Startup Manual
General
• LGA1200 10th Intel®Core™ i9/i7/i5/i3/Pentium®/Xeon®
• BIOS: AMI 256 Mb SPI BIOS
• Chipset:
- PCE-7132: Intel W480E
- PCE-5132: Intel Q470E
- PCE-5032: Intel H420E
• System memory:
- PCE-7132: Supports dual channel DDR4 2666/2933
32GB per DIMM with ECC/non-ECC; Max. capacity is
up to 64GB
- PCE-5132/5032: Supports dual channel DDR4
2666/2933 32GB per DIMM without ECC; Max. capacity
is up to 64GB
Note: Please select Intel ECC supported processor to
enable ECC function.
• SATA Ports:
- PCE-7132/5132 supports 6 x SATA3.0 ports with SW
Raid 0,1,5,10.
- PCE-5032 supports 4 x SATA3.0 ports without Raid
function.
• M.2 Ports: PCE-7132/5132 supports M.2 2280 type M
module and compatible to PCI Express 3.0
• Serial ports: Two RS-232 with pin headers
• Parallel port: One parallel port, supports SPP/EPP/ECP
mode
• Watchdog timer: 255 level timer intervals
• USB 2.0:
- PCE-7132/5132/5032: 6*USB2.0 (USB Type
A*1+Rear*1, 4 on backplane)
• USB 3.2:
- PCE-7132/5132: 6*USB3.2 (Gen1) (Pin-header*6),
2*USB3.2 (Gen2) (Rear I/O)
- PCE-5032: 2*USB3.1 (Gen1) (Pin-header*2), 2*USB3.2
(Gen1) (Rear I/O)
• GPIO: One programmable 8-bit GPIO pin-header
VGA Interface
• Chipset: Intel®HD Graphics
• Shared system memory is subject to OS
Ethernet Interface
• Chipset supports:
- LAN 1: I219LM(PCE-7132/5132); I219V(PCE-5032)
- LAN 2: I210AT(PCE-7132/5132); I211AT (PCE-5032)
• Connection: 2 x on-board RJ-45 connectors with LED
indicators.
Specications
For more information on this and other Advantech prod-
ucts, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our sup-
port website at:
https://advt.ch/PCE-7132
https://advt.ch/PCE-5132
https://advt.ch/PCE-5032
Register your products on our website and get 2 months
extra warranty for Free at:
http://www.register.advantech.com
This manual is for the PCE-5032/5132/7132
Part No. 2041513200
Printed in China
1st Edition
September 2020

2 PCE-7132/5132/5032 Startup Manual
Mechanical and Enviromental
• Dimensions: (L x W): 338 x 122 mm
• Power supply voltage: +12 V, +5 V, +3.3 V, +5 VSB
• Power requirements(Idle):
CPU: Processor: Intel
®
W-1290E
Memory: 2 DDR4 26666U 32GB
Voltage: +3.3 V, +5 V, +12 V
Current: 1.15 A, 1.54 A, 1.38 A
Operating temperature: 0 ~ 60° C (depending on CPU)
• Weight: 0.5 kg (weight of board)
The board has a number of jumpers that allow you to con-
gureyoursystemtosuityourapplication.Thetablebelow
lists the function of each of the jumpers and connectors.
Connectors
Label Function
USB3C1 USB3 port1
USB3C2 USB3 port2
USB2C1 USB2 port1
LAN1 Intel i219LM(PCE-7132/5132);
Intel i219V(PCE-5032)
LAN2 Intel i210-AT(PCE-7132/5132);
Intel i211-AT(PCE-5032)
VGA1 VGA connector
KBMS1 External PS/2 keyboard and mouse
HDAUD1 Advantech HD audio module expansion
pin-header
LPC1 LPC module expansion pin-header
Sysfan1 4 PIN fan power connector for support-
ing PWM or DC fan
LANLED1 LANLED
USB2A1 USB2 port2
USB3H1 USB3 port 3,4
USB3H2 USB3 port 5,6(PCE-7132/5132)
USB3H3 USB3 port 7,8(PCE-7132/5132)
COM1
RS-232 (9-pin Box Header) COM2 RS-
232 (9-pin Box Header) LPT1 Parallel
port
SATA0 Port 0
SATA SATA port 1, 2, 3, 4, 5(PCE-7132/5132);
SATA port 1, 2, 3(PCE-5032)
Jumpers and Connectors
Jumpers
Label Function
JCMOS1 CMOS clear
JME1 Clear ME data
JWDT1 Watchdog timer output selection
JOBS1 SIO Monitor Alarm
JCMOS1/JME1: Clear CMOS/ME data
Closed Pins Result
1-2 Keep CMOS/ME data (Default)
2-3 Clear CMOS/ME data
Closed Open
H/W monitor alarm (JOBS1)
Function Jumper Setting
Closed Enable OBS alarm (Default)
Open Disable OBS alarm
JWDT1: Watchdog timer output option
Closed Pins Result
1-2 Reserved
2-3 System reset (Default)
The drivers for the PCE-7132/5132/5032 are located on the
Advatecho󰀩cialwebsites.Pleasevisittheo󰀩cialwebsite
for downloading.
https://support.advantech.com/support/new_default.aspx
Caution! The computer is supplied with a battery-powered
real-time clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer’s instructions.
123
1 2 3
Specications
Jumpers and Connectors (Cont.)
Software Installation

PCE-7132/5132/5032 Startup Manual 3
This device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the following two conditons:
1. This device may not cause harmful interference;
2. This device must accept any interference received, including interference that may cause undesired operation.
Board Layout
Declaration of Conformity
Figure 1: Board Layout: Jumper and Connector Locations
Note: *PCE-5032 supports 4 SATA ports (SATA0~3) and one internal USB3.2 pin-header.
*PCE-5032 doesn’t feature NGFF(M.2).
*PCE-5032 supports 1 DP port.
SYSTEMFAN1
CPUFAN1
DIMMA1
DIMMB1 SATA0~5 USB3H2 USB3H3
USB3H1
LANLED1
USB2A1
USB2C1
USB3C2
USB3C1
LAN12
VGA1
COM2
COM1
PCH1
BAT1
DP1&DP2
CPU1 LPC2
SPI_CN1
LPT1
M.2