
enter, and it will automatically search and display the
Bluetooth-enabled devices(Bluetooth headphones/ speakers).
You can choose and press button to connect/unpair, or
press the button to go to the menu list, including:
Bluetooth On/Off. Choose to enable or disable Bluetooth.
Search Device. When the Bluetooth is enabled,
choose ”Search Device” to search the nearby Bluetooth
devices manually, then all of the devices which has
opened its Bluetooth will be listed.
Device List. Select the device you want to
connect/disconnect, and then press button to
confirm. After successfully connected, this player is ready
to play music or FM radio by Bluetooth headphones,
Note: 1. When listen to radio by Bluetooth, wired
headphones are needed as radio antenna. 2. Those
functions are not available when Bluetooth opened:
Recording, Video, Picture, Pedometer, Equalizer, Variable
You can enable voice recording by the following two ways:
on the right side of the player to start
2. Find “Recordings” on Home menu with the button
to access to its function. Then choose "Start voice
Start voice recording. Press button to start voice
recording, press again to pause. Press the button
and choose “Yes” to save the recording file.
Recordings library. Check the saved recordings. You will
need to choose from local folder or card folder if the
memory card is inserted. While it’s on recording playing
interface, hold down the button and choose “Delete”