
Brightness: Set the brightness of your player;
Backlight timer: set the time at
10(seconds)/20(seconds)/ 30 (seconds)/Always on.
The default time is 30 seconds.
Sleep timer: Choose “Off” to turn off this function,
or set the time between 1-120(minutes), when it
reaches the sleep timer you set, the player will power
Off timer: Choose “Off” to turn off this function, or
set the time between 1-15(minutes), when it reaches
the power off time you set, the player will turn off
automatically no matter there is music playing in the
Note: it only works once for each use.
Information: See player information and disk
Auto upgrade: Choose to update the firmware;
Download the following firmware to a Micro SD card
after you will insert it into the player.
To update the firmware, please visit www.agptek.com
/support/download.html or www.agptek.com/blog to
download the firmware and update.
Format device: Choose to format the device. If
you choose “Yes”, then all of the data in the Micro SD
card will be deleted and cannot be recovered.