IMPORTANT SAFEGUARDS
When using electrical appliance, basic safety
precautions
Should always be followed including the following
1. Read all instructions.
2. To protect against risk of electrical shock do not
put housing in water or other liquid.
3. Close supervision is necessary when any
appliance is used by or near children.
4. Unplug from outlet when not in use, before
putting on or taking off parts, and before
cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility
for examination, repair or electrical or mechanical
adjustment.
7. The use of attachments not recommended or sold
by the manufacturer may cause fire, electrical
shock or injury.
8. Do not use outdoors.
9. Do not let cord hung over edge of table or counter.
10. Do not let cord contact hot surface, including the
stove.
11. Keep hands and utensils out of container while
blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper
may be used but must be used only when the
blender is not running.
12. Blades are sharp, handle carefully.
13. Do not blend hot liquids.
14. The blender is not to be operated with empty
blending unit (i.e. without solid or liquid
foodstuff)
15. Do not operate the blender more than 180 second
with any loading.
16. If the supply cord is damaged, it must be replaced
by the manufacturer of its service agent of a
similarly, qualified person in order on avoid a
hazard.
17. To reduce the risk of injury never place the blade
on the motorbase without jarproperly attached.
Always completely assemble the blade and cup
before placing on the motor base.
18. Always operate blender with cup in place.
19. This blender is turned, you have to hold the pulse
switch, By turning the cup on the motor base.
SAVE THESE INSTRUCTIONS.
Operating instructins
1.Place the motor base on the flat, clean,dry countertop or table.
2.Make sure the unit is unplugged.
3.The sport rocket blender comes with 1 blending cup. Place the food to be
processed into cup.
4.To assemble for blending, using the blade collar handle，place the blending
blade into the blending cup.
WARNING: Never operate the sport rocket blender when the processing
cup is empty.
WARNING: Never overfill the processing cup .Do not exceed the MAX
line.(600ml line)
