AirLive WL-5450AP User manual

Wireless Access Point
WL-5450AP

WL-5450AP
En
g
lish
Polski
Español
Deutsch
Česky
Русский
................
..................
...............
..............
..................
...............
Portu
g
uês
日本語
Slovensky
Magyar
Italiano
...........
.................
............
...............
...............
1
9
16
23
30
37
43
50
56
Table of Contents
List of Languages
63
70

1
WL-5450AP English
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan
Declare that the product
Wireless AP
AirLive WL-5450AP
is in conformity with
In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive
Clause Description
■EN 300 328 v1.6.1 (2004-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); wideband transmission equipment operating in the
2.4GHz ISM ban and using spread spectrum modulation techniques; Part 1：technical Characteristics and test
ConditionsPart2：Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
■EN 301 489-1 V1.4.1 (2002-08) Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard
■EN 301 489-17 V1.2.1 (2002-08) for radio equipment and services; Part 17：Specific conditions for wideband data and HIPERLAN equipment
■EN 55022:1998/A1:2000/A2:2003 Limits and methods of measurement of radio disturbance characteristics of information technology equipment
■EN 55024:1998/A1:2001/A2:2003 Information Technology equipment-Immunity characteristics-Limits And methods of measurement
■EN 50385 Product standard to demonstrate the Compliance of radio base stations and Fixed terminal stations for wireless
Telecommunication system with the Basic restrictions or the reference levels related to human exposure to radio
Frequency electromagnetic fields ( 110 Mhz – 40 GHz ) - General public
■EN 60950-1:2001/A11:2004 Safety for information technology equipment including electrical business equipment
■CEmarking
Manufacturer/Importer
Signature： ______________
Name ： Albert Yeh____
Position/ Title : Vice President
Date： 2005/8/17_____
English

2 English WL-5450AP
Note on the FCC standard
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences
when the equipment is operating in a commercial area. This equipment generates uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause interference in the
transmission of radio communications. If operating in a residential area, it is probable this equipment will cause
harmful interference, in which case the user will be required to try to correct this interference using his own
means.
Note on CE Marking
This is a Class B product. In a residential area this product may cause radio interference, in which case the user
can be required to take the appropriate measures. OvisLink Corp. hereby declares that AirLive WL-5450AP
meets the basic requisites of directive 99/05/CE, and is therefore liable for the accuracy of these data:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan
TEL: [phone]
Warranties
This product has undergone various quality controls to ensure proper operation.
This product is covered by a two-year warranty for countries inside European Union. For other countries, the
warranty period is one year only. In the event of any manufacturing fault or breakdown, it will be repaired by
OvisLink Corp. Please contact your supplier for details on the procedure to follow. This warranty shall not be
applicable in the event of damage caused by improper use of the product, accidents, faulty handling or
manipulation nor any future incompatibility with third party products.
English

3
WL-5450AP English
The AP mode’s default IP address is 192.168.100.252
The default Subnet Mask is 255.255.255.0
The default SSID is airlive
The default Channel is 11
The default DHCP client is Disabled
The default is set to AP mode
Important Information
This Wireless Access Point can support four modes AP,Client, Bridge, Repeater (WDS)
If you want to change to Repeater mode, please go to Status> WDS Setting to enable the WDS function
Under Bridge Mode, you can set WEP Key or WPA in order to prevent unrelated people to eavesdrop.
Front Panel
GPL Compliance: Part of the device's firmware use GPL licensed code. There is no warranty for the GPL
software. You can get a copy of the GPL source code from our website at http://www.airlive.com/gpl.htm
English

4 English WL-5450AP
LED Indicators
Status
LED Indicator Color Solid Flashing
Power Green Turns solid green when power is applied to this
device. N/A.
Status Red Turns solid red when the device is booting, after
boot successfully, the light turn off.
Link/Act. Green Turns solid green when connected and associated
to at least a client station.
Receiving/
Sending data
WEP/WPA Orange Turns solid orange when wireless security is
enabled. N/A
MAC Ctrl Orange Turns solid orange when MAC Control is enabled. N/A
Bridge / Repeater Orange Turn solid orange when Bridge or Repeater is
enabled. N/A
LAN 1
LAN 2 Green Turns solid green when linked to a local network. Receiving/
Sending data
Installation Steps
1. Please install your network cards first before the AP
2. Screw-in the antenna (clockwise) into the Antenna connector
3. Connect the power and LAN cable to the back
4. Use your wireless card to do a site survey, the default SSID is airlive and Channel is 11
5. If you need to change AP’s configuration, please follow the procedure below:
English

5
WL-5450AP English
Mode: This Wireless Access Point can support three
modes AP, Client, and Bridge.
The default is set to AP mode. Click the pull
down arrow dyou can change it to Client
mode.
To change to Repeater mode, you will have to
go to Wireless/WDS setting to enable WDS.
Wireless: Basic Setting
This page includes all primary and major parameters. Any parameter change will cause the device to reboot for
the new settings to take effect.
The AP’s default IP address is 192.168.100.252. Please make sure your computer IP is in the same
subnet as the AP (i.e. 192.168.100.x)
Open the web browser and enter 192.168.100.253.
English

6 English WL-5450AP
Network Type: When in Client mode, you
can select between Ad-Hoc
and Infrastructure.
Wireless: WDS Setting
In order to set “WDS”, you need to
check on the WDS Setting
English

7
WL-5450AP English
Repeater, Bridge, and Client Setup
Repeater Mode
Device B:
Mode: Repeater
WDS: Enable
Mac Address:
Device A’s AP Mac Address
Device A:
Mode: Repeater
WDS: Enable
Mac Address:
Device B’s AP Mac Address
Please make sure both A and B are set to the same ESSID and channel
Bridge Mode Device A:
Mode: Bridge
Device B:
Mode: Bridge
Please make sure both A and B are set to the same ESSID and channel
To enhance security, you can disable the “Broadcast SSID” function under “Wireless->Advance
Settings”. Then turn on WEP or WPA.
English

8 English WL-5450AP
Device A:
Mode: Client
Network Type: Infrastructure
Client Mode
Device B:
Mode: AP
Please make sure both A and B are set to the same ESSID and channel
English