Ameda Elite Configuration guide

A
Am me ed da a E El li it te e a an nd d H Hy yg gi ie en ni iK Ki it t
O
Op pe er ra at ti in ng g & & C Cl le ea an ni in ng g I In
ns st tr ru uc ct ti io on ns s
®®
Assembling the Ameda HygieniKit
®
To Single Pump To Double Pump
Operating the Ameda Elite Electric Breast Pump
®
5. Assemble the Ameda HygieniKit©Milk Collection system as
per the instructions included with the product.
6. Insert the tubing adaptor on the HygieniKit©Milk Collection
System into the piston cylinder opening.
7. Centre your nipple(s) into the breast flange(s) of the
HygieniKit©Milk Collection System.
(Turn over for Cleaning Instructions)
P.O. Box 600 • Mordialloc Victoria 3195
Freecall: 1800 227 464 • Telephone: [phone] • Facsimile: [phone] • A.B.N. 30 057 079 428
www.ameda.com.au
Startin
g
the Ameda Elite Electric Breast Pum
p
®
4. Slowly, turn the vacuum dial to the right to the highest most
comfortable for you. Note: High suction does not necessarily
produce more milk.
Settin
g
the C
y
cle S
p
eed
1. Turn the cycle dial all the way to the right to help trigger the
let – down reflex. Once your milk begins to flow, turn the dial
back to the left.
2. As your milk begins to slow down, repeat step 5 to trigger
more let-downs.
3. When finished pumping, turn the vacuum dial all the way to
the left to turn pump off.

Cleaning the Ameda HygieniKit
Wash gently:
Silicone diaphragm, pump body, valve, bottle and
reducing insert, in warm soapy water.
Soak valve if required and rinse gently. Do not use
bottle brush.
Place items for disinfection/sterilization according to
hospital protocol.
IMPORTANT:
Sterilization instructions :
Hospital
For Polypropylene HygieniKits:
134 deg C for up to 5 mins
For Polycarbonate HygieniKits:
121 deg C for 15 mins
Home
Boil for 20 mins or wash in warm soapy water.
Air dry before assembly.
Cleaning the Elite:
Wipe Elite with hospital grade disinfectant with a
damp cloth. If the cylinder needs to be detached
place the index finger into the tube and turn
clockwise releasing it from the attachment.
Do not use abrasives or solvents.
After Use
Wipe over:
Tubing adaptor, tubing and adaptor cap.
Do not wash. These item do not require washing
as they do not come in to contact with mothers’
milk.
®
Reinstall the cylinder as shown in the picture,
In attachment points 1and 2. Press and click
in place.
(See over for Operating Instructions)