Ameda Elite User manual

Ameda®Elite™Breast Pump
Turn CYCLES dial to
right to MAX.
Center ange on breast
to create seal.
Once milk ows, turn
CYCLES dial to left to help
drain milk. Try half-way,
adjust as needed.
Insert tubing adapter into
pump piston.
If milk ow slows, try for
another let-down. Turn
CYCLES to MAX, then turn
to left to slow speed when
milk is owing. Repeat as
needed.
To turn off, turn VACUUM
dial to left.
Assemble HygieniKit®.
Tubing Adapter
With suggested start-up settings
QUICK START
QUICK START
Tubing
Adapter Cap
Silicone Diaphragm
Breast Flange
Valve
Bottle
To turn on, turn VACUUM dial
to right to highest comfortable
setting. Try half-way, adjust as
needed.

AMEDA®ELITE™
CLEANING INSTRUCTIONS
AMEDA HYGIENIKIT®
CLEANING INSTRUCTIONS
For At-Home/End-Users:
After each pumping, wipe the pump with clean, damp cloth.
For Hospitals/Rental Stations:
Clean between users. Wearing disposable gloves, wipe the pump with
damp disposable cloth, using hospital approved antibacterial cleaner such as
CaviCide™.
• Take apart the Ameda HygieniKit to clean. Set aside tubing, adapter cap
and tubing adapter. These can be wiped with a clean, damp cloth, but
should not be washed.
• Rinse any milk residue from remaining pump parts, ange, diaphragm, valve
(and bottle), with cool water.
• Wash these remaining parts with warm, soapy water. Rinse well with warm,
clean water.
• Allow parts to air dry on clean towel or drying rack before assembly and
next use.
• Cover parts with clean towel if not planning to use again right away.
Breast anges and bottles can be washed on the upper rack of a standard
household dishwasher away from heating elements. Wash diaphragms and valves
gently by hand. Do not insert anything through valve while cleaning.
Ameda, Elite, HygieniKit and associated logos are trademarks of Ameda, Inc.
Any other trademarks brand or images appearing herein are property of their respective
owners and are used herein with expressed or implied permission.
©2014 Ameda, Inc. 26601058-0514
GOOD FIT -
During pumping, your
nipple moves freely in
the breast ange tunnel.
You see space around
the nipple. Not much
areola is drawn into the
tunnel with the nipple.
TOO SMALL -
During pumping, some
or all of your nipple rubs
against the sides of the
breast ange tunnel.
TOO LARGE -
During pumping, more
areola is drawn into the
breast ange with your
nipple.Your areola may
rub against the side of
the breast ange tunnel.
FINDING A GOOD
BREAST FLANGE FIT