Ameda Elite Series Configuration guide

Advantage Health Care Pty. Ltd • P.O. Box 600 • Mordialloc Victoria 3195
Freecall: 1800 227 464 • Telephone: [phone] • Facsimile: [phone] • A.B.N. 30 057 079 428
www.ameda.com.au
Nov07
A
Am me ed da a E El li it te e®
® a
an nd d H Hy yg gi ie en ni iK Ki it t®
®
O
O
p
p
e
er ra at ti in n
g
g
& &C Cl le ea an ni in n
g
g
I
In ns st tr ru uc ct ti io on ns s
Assembling the Ameda HygieniKit®
To Single Pump To Double Pump
O
p
eratin
g
the Ameda Elite® Electric Breast Pum
p
1. Assemble the Ameda HygieniKit©Milk Collection system as
per the instructions included with the product.
2. Insert the tubing adaptor on the HygieniKit©Milk Collection
System into the piston cylinder opening.
3. Centre your nipple(s) into the breast flange(s) of the
HygieniKit©Milk Collection System.
Startin
g
the Ameda Elite® Electric Breast Pum
p
4. Slowly, turn the vacuum dial to the right to the highest
position most comfortable for you. Note: High suction does
not necessarily produce more milk.
Setting the Cycle Speed
5. Turn the cycle dial all the way to the right to help trigger the
let – down reflex. Once your milk begins to flow, turn the dial
back to the left. As your milk begins to slow down, repeat
step 5 to trigger more let-downs.
6. When finished pumping, turn the vacuum dial all the way to
the left to turn pump off.
(Turn over for Cleaning Instructions)

Cleaning the Ameda HygieniKit
®
After use:
Wipe over the tubing adaptor, tubing and adaptor
cap.
Do not wash.
Does not require cleaning as it does not come in
contact with mothers’ milk.
Wash gently :
Silicone diaphragm, pump body, valve, bottle and
reducing insert,
in warm soapy water. Soak valve if required.
Rinse gently. Do not use bottle brush.
Place items for disinfection/sterilization according to
hospital protocol.
IMPORTANT :
Sterilization instructions :
Hospital
For Eco HygieniKit (polypropylene) :
134 deg C for up to 5 mins
For HygieniKits (polycarbonate) :
121 deg C for 15 mins
Home
Boil for 20 mins or wash in warm soapy water.
Air dry before assembly.
Cleaning the Elite :
Wipe Elite with hospital grade disinfectant with a
damp cloth. Remove the cylinder by placing the
index finger into the tube and by turning clockwise
releasing it from the attachment.
Do not use abrasives or solvents.
Reinstall the cylinder as shown in the picture,
In attachment points 1and 2. Press and click
in place.
(See over for Operating Instructions)
Advantage Health Care Pty. Ltd • P.O. Box 600 • Mordialloc Victoria 3195
Freecall: 1800 227 464 • Telephone: [phone] • Facsimile: [phone] • A.B.N. 30 057 079 428
www.ameda.com.au
Nov07