American Standard Serin T064900 User manual

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
Serin™
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T064900
T064901
Certied to comply with ANSI A112.18.1M
CAUTION Turn off hot and cold water
supplies before begining.
M965946 (8/18)
1" MAX.
(25 mm)
MOUNTING
SURFACE
3-1/4" D.
(82mm) D.
2" D.
(52mm) D.
9-1/2"
(240mm)
6-3/4"
(170mm)
9-3/4"
(247mm) 2-3/4"
(71mm)
6-1/2" to 12"
(165mm to 305mm)
2-1/16" D.
(52mm) D.
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
3
4
6
RECESS
MOUNTING
SURFACE
1
5
2
7
•Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (7).
•Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
•Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
•Install PLUG BUTTON (6).

- 2 -
FITTING
MOUNTING
DECK
SPOUT
SHANK
HOT
COLD
2
4
6
5
1
3
VALVE
LOCKING
VALVE
LOCKING
M965946 (8/18)
2VALVE ASSEMBLY
INSTALL HANDLES
3
• Turn VALVE to OFF position.
• Push ADAPTER (1) on VALVE STEM (2), so that the hole of the ADAPTER (1) without a spline is facing up. Fig. A.
Tighten STEM SCREW (3) to secure ADAPTER (1).
• Align DECK ADAPTER (5) to LEVER HANDLE ASSEMBLY (4). Push LEVER HANDLE
ASSEMBLY (4) onto DECK ADAPTER (5) rmly to ush against mounting surface.
1
4
TOP
SPLINE END DOWN
Fig. A.
FEMALE TEETH
2
3
5
MALE TEETH
• Remove PLASTER GUARDS.
• Thread INSERT (1) into SIDE VALVE (2) until it touches the
installation surface.
• Thread INSERT (3) into SIDE VALVE (4) until it touches the
installation surface.
• Tighten COUPLING (5) into TEE (6) for products without
hand shower.

- 3 -
CARE INSTRUCTIONS:
M965946 (8/18)
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
5
4
2
3
5
6
8
7
1
7
9
4
HAND SHOWER INSTALLATION
• Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12”max from
SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure
RUBBER RING (2) is properly seated in ESCUTCHEON (1).
• Add SEAL WASHER (3) and connect HOSE (8) to outlet nipple at the bottom
of TEE (5). Tighten rmly.
• Slip SHOWER HOSE (6) with COUPLING NUT through SPRAY HOLDER (4)
and ESCUTCHEON (1). (Note: SPRAY HOLDER (4) must be separate from
ESCUTCHEON (1) to get HOSE (6) through ESCUTCHEON (1). Install SEAL (7)
before connecting both HOSES (6) and (8). INSTALL second SEAL (9) and
connect HAND SHOWER (9) to SPRAY HOSE (6).
NOTE: When not in use, HAND SHOWER should
be seated in the HOLDER.

- 4 -
M962347-YYY0A
SPOUT ESCUTCHEON KIT
M970498-YYY0A
HAND SHOWER
HOLDER
033760-0070A
HAND SHOWER
SEAL KIT
028667-YYY0A
HAND SHOWER HOSE
M950245-YYY0A
HANDLE
ASSEMBLY
M962269-YYY0A
SPOUT END
918555-0070A
HANDLE SCREW
918049-0070A
HANDLE ADAPTER
M970585-YYY0A
VALVE ESCUCHEON
KIT
M970478-0070A
SHANK KIT
M970479-0070A
SHANK
MOUNTING KIT
For T064901 Only
M970509-0070A
TRANSFER
ASSEMBLY
(T064901)
M962575-YYY0A
TRANSFER
KNOB
(T064901)
- 4 - M965946 (8/18)
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
BRUSHED NICKEL 295
Serin™
Roman Tub Filler
MODEL NUMBER
T064900
T064901
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 [phone]
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200