American Standard 2555.021 User manual

M968231C
1TOWEL RING and ROBE HOOK MOUNTING & INSTALLATION
Secure MOUNTING PLATE (5) to wall with WOOD SCREWS (4).
2
Regular Screwdriver
Recommended Tools
Phillips Screwdriver
Drill
10'
Tape Measure
The TOWEL RING (1) and DOUBLE ROBE HOOK (2) work best if secured to a wall stud or cross brace within the wall, using the
SCREWS (4) supplied.
If the TOWEL RING (1) and DOUBLE ROBE HOOK (2) are to be installed on a tile or plaster wall, the ANCHORS (8) and SCREWS (4)
should be used.
USE MOUNTING BRACKET (5)
AS TEMPLATE
5
8
6
4
ACCESSORIES
TOWNSQUARE
Installation
Instructions
2555.021
2555.041
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly--please read these
instructions carefully before you begin.
INSTALL TOWEL RING AND ROBE HOOK
2
1
TOWEL RING
DOUBLE ROBE HOOK
8
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
10
9
7
4
5
FINISHED WALL
3
Place ESCUTCHEON (7) onto MOUNTING BRACKET (5), and secure with ATTACHMENT SCREW (3).
Install the TOWEL RING (1) or DOUBLE ROBE HOOK (2) into WALL ESCUTCHEON (7).
Tighten SET SCREW (9) using 2-1/2mm HEX KEY (10) supplied to secure assembly to ESCUTCHEON (7).
For installations on tiled walls, If TILE ANCHORS (8) and SCREWS (4) are use for securing MOUNTING PLATE (5), then
drill two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (8) flush with face of the finished wall.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (5) as a template mark the two
spots for the mounting holes. If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (4).
For installations on drywall, use DRYWALL ANCHORS (6) and SCREWS (4) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips
screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with
the wall. Place MOUNTING PLATE (5) over DRYWALL ANCHORS (6) and insert screws provided with #2 Phillips screwdriver. See
illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (4).

ACCESSORIES
TOWEL RING
DOUBLE ROBE HOOK
TOWNSQUARE
2555.021
2555.041
M962117-YYY0A
ESCUTCHEON
M962118-0070A
MOUNTING BRACKET
M962116-YYY0A
ROBE HOOK
M962115-YYY0A
TOWEL RING
DOUBLE ROBE HOOK
TOWEL RING
M968231C
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1-800 442-1902
Weekdays 8:00 a.m. to 8:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2002
A918486-0070A
ATTACHMENT SCREW
CHROME
POLISHED BRASS (PVD)
SATIN (PVD)
002
099
295
Replace the "YYY" with appropriate finish code